1303304053be4f53ad60d9f8144bd37b
Model/varenr.: 154-5401

These ARP main studs are made from 8740 chromoly steel and have a 190,000 psi tensile-strength rating. They are precision centerless-ground and thread-rolled to Mil-S-8879 specs, with a black oxide finish for corrosion resistance. The kits come complete with hardened washers and high-strength hex nuts.

Fra: ARP
685,34  m/Moms
(548,27  u/Moms )
Lager: På lager
Model/varenr.: 154-5201

ARP main bolt kits are priced low, but their quality is extremely high. These high performance bolts are rated at a hefty 180,000 psi tensile strength and they have a wide-area flange to provide even load distribution during torquing. That's a combination that will get the job done for you.

Fra: ARP
754,74  m/Moms
(603,79  u/Moms )
Lager: På lager
Model/varenr.: 254-1803

Ford SB 302-351W (late model with side rails) Black Oxide oil pan bolt kit, with 12-point head nuts. ARP # 254-1803, oil pan bolts include special flanged lock nuts. The engineers at ARP spent quite a bit of time developing these highly effective, unique ARP Oil Pan Bolt and Stud Kits. They’re designed to make it as easy as possible to install a pan and seal it properly.

Fra: ARP
373,03  m/Moms
(298,42  u/Moms )
Lager: På lager
Model/varenr.: 254-1804

Ford SB 302-351W (late model with side rails) Black Oxide oil panbolt kit, withHex head nuts. ARP # 254-1804,oil panbolts include special flanged lock nuts.

Fra: ARP
381,70  m/Moms
(305,36  u/Moms )
Lager: På lager
Model/varenr.: 454-1903

You can eliminate oil seepage and prolong the life of your gaskets by installing one of these oil pan stud kits from ARP. Each stud has a unique nut-starter radius to prevent cross-threading and is available in polished stainless steel or black oxidized chromoly.

Fra: ARP
1.440,08  m/Moms
(1.152,06  u/Moms )
Lager: På lager
Model/varenr.: 150-8801

Those first moments that an engine runs prior to building oil pressure are when damage can easily occur. ARP's oil pump primer kits let you spin the oil pump with a drill motor and bring up the oil pressure prior to starting the engine.

Fra: ARP
503,16  m/Moms
(402,53  u/Moms )
Lager: På lager
Model/varenr.: 154-5203

ARP main bolt kits are priced low, but their quality is extremely high. These high performance bolts are rated at a hefty 180,000 psi tensile strength and they have a wide-area flange to provide even load distribution during torquing. That's a combination that will get the job done for you.

 

Fra: ARP
936,91  m/Moms
(749,53  u/Moms )
Lager: På lager
Model/varenr.: 154-5408

These ARP main studs are made from 8740 chromoly steel and have a 190,000 psi tensile-strength rating. They are precision centerless-ground and thread-rolled to Mil-S-8879 specs, with a black oxide finish for corrosion resistance. The kits come complete with hardened washers and high-strength hex nuts.

Fra: ARP
737,39  m/Moms
(589,91  u/Moms )
Lager: På lager
Model/varenr.: 154-5605

These ARP main studs are made from 8740 chromoly steel and have a 190,000 psi tensile-strength rating. They are precision centerless-ground and thread-rolled to Mil-S-8879 specs, with a black oxide finish for corrosion resistance. The kits come complete with hardened washers and high-strength hex nuts.

Fra: ARP
980,29  m/Moms
(784,23  u/Moms )
Lager: På lager
Model/varenr.: 154-5609

SB Ford /WP Man O’War iron/aluminum block Main Stud Kit

Fra: ARP
1.136,44  m/Moms
(909,15  u/Moms )
Lager: På lager
Model/varenr.: 254-5202

Ford Small Block SVO 351 cid, 4 bolt main, 3/8" outer bolts, Pro Series, ARP Main Bolts 254-5202
ARP main bolts are far superior to any other main bolt kit offered for use in competition engines, ARP main bolts are designed to meet the exacting standards and demands of professional engine builders.

Fra: ARP
1.813,10  m/Moms
(1.450,48  u/Moms )
Lager: På lager
Model/varenr.: 254-5203

Ford Small Block SVO 351 cid, 4 bolt main, 7/16" outer bolts, Pro Series, ARP Main Bolts 254-5203
ARP main bolts are far superior to any other main bolt kit offered for use in competition engines, ARP main bolts are designed to meet the exacting standards and demands of professional engine builders.

Fra: ARP
1.787,08  m/Moms
(1.429,66  u/Moms )
Lager: På lager
Model/varenr.: 354-1401

Make installing a timing chain or cam as easy as possible with these timing cover stud kits from ARP. They provide a mounting area for your gasket and simplify the process of getting the timing cover in place. These studs come with flanged lock nuts.

Fra: ARP
216,88  m/Moms
(173,50  u/Moms )
Lager: På lager
Model/varenr.: 354-5604

These ARP main studs are made from 8740 chromoly steel and have a 190,000 psi tensile-strength rating. They are precision centerless-ground and thread-rolled to Mil-S-8879 specs, with a black oxide finish for corrosion resistance. The kits come complete with hardened washers and high-strength hex nuts.

Fra: ARP
1.362,00  m/Moms
(1.089,60  u/Moms )
Lager: På lager
Model/varenr.: 154-5611

There are many important reasons to use ARP main stud kits, including the elimination of main cap walk and fretting, as well as protecting the threads in your engine block. All kits come complete with hardened parallel-ground washers and high quality nuts.

Fra: ARP
1.414,05  m/Moms
(1.131,24  u/Moms )
Lager: På lager
Model/varenr.: 154-5610

These ARP main studs are made from 8740 chromoly steel and have a 190,000 psi tensile-strength rating. They are precision centerless-ground and thread-rolled to Mil-S-8879 specs, with a black oxide finish for corrosion resistance. The kits come complete with hardened washers and high-strength hex nuts.

Fra: ARP
1.483,45  m/Moms
(1.186,76  u/Moms )
Lager: På lager
Model/varenr.: 154-5003

ARP main bolt kits are priced low, but their quality is extremely high. These high performance bolts are rated at a hefty 180,000 psi tensile strength and they have a wide-area flange to provide even load distribution during torquing. That's a combination that will get the job done for you.

Fra: ARP
615,94  m/Moms
(492,75  u/Moms )
Lager: På lager
Model/varenr.: 154-5403

These ARP main studs are made from 8740 chromoly steel and have a 190,000 psi tensile-strength rating. They are precision centerless-ground and thread-rolled to Mil-S-8879 specs, with a black oxide finish for corrosion resistance. The kits come complete with hardened washers and high-strength hex nuts.

Fra: ARP
867,51  m/Moms
(694,01  u/Moms )
Lager: På lager
Model/varenr.: 154-5407

These ARP main studs are made from 8740 chromoly steel and have a 190,000 psi tensile-strength rating. They are precision centerless-ground and thread-rolled to Mil-S-8879 specs, with a black oxide finish for corrosion resistance. The kits come complete with hardened washers and high-strength hex nuts.

Fra: ARP
720,04  m/Moms
(576,03  u/Moms )
Lager: På lager
Model/varenr.: 154-5409

These ARP main studs are made from 8740 chromoly steel and have a 190,000 psi tensile-strength rating. They are precision centerless-ground and thread-rolled to Mil-S-8879 specs, with a black oxide finish for corrosion resistance. The kits come complete with hardened washers and high-strength hex nuts.

Fra: ARP
893,54  m/Moms
(714,83  u/Moms )
Lager: På lager
Model/varenr.: 154-5410

Here's just what you need to secure a bellhousing in place. The studs are designed with a radiused head to position the bellhousing and accept nuts without the fear of cross-threading.

Fra: ARP
702,69  m/Moms
(562,15  u/Moms )
Lager: På lager
Model/varenr.: 154-5503

Here's just what you need to secure a bellhousing in place. The studs are designed with a radiused head to position the bellhousing and accept nuts without the fear of cross-threading. There are many important reasons to use ARP main stud kits, including the elimination of main cap walk and fretting, as well as protecting the threads in your engine block.

Fra: ARP
1.127,76  m/Moms
(902,21  u/Moms )
Lager: På lager
Model/varenr.: 154-5603

Here's just what you need to secure a bellhousing in place. The studs are designed with a radiused head to position the bellhousing and accept nuts without the fear of cross-threading. There are many important reasons to use ARP main stud kits, including the elimination of main cap walk and fretting, as well as protecting the threads in your engine block

Fra: ARP
1.440,08  m/Moms
(1.152,06  u/Moms )
Lager: På lager
Model/varenr.: 154-5606

Here's just what you need to secure a bellhousing in place. The studs are designed with a radiused head to position the bellhousing and accept nuts without the fear of cross-threading. There are many important reasons to use ARP main stud kits, including the elimination of main cap walk and fretting, as well as protecting the threads in your engine block.

Fra: ARP
1.544,18  m/Moms
(1.235,34  u/Moms )
Lager: På lager
Model/varenr.: 154-5607

Here's just what you need to secure a bellhousing in place. The studs are designed with a radiused head to position the bellhousing and accept nuts without the fear of cross-threading. There are many important reasons to use ARP main stud kits, including the elimination of main cap walk and fretting, as well as protecting the threads in your engine block.

Fra: ARP
2.212,16  m/Moms
(1.769,73  u/Moms )
Lager: På lager
Model/varenr.: 154-5608

Here's just what you need to secure a bellhousing in place. The studs are designed with a radiused head to position the bellhousing and accept nuts without the fear of cross-threading. There are many important reasons to use ARP main stud kits, including the elimination of main cap walk and fretting, as well as protecting the threads in your engine block.

Fra: ARP
1.500,80  m/Moms
(1.200,64  u/Moms )
Lager: På lager
Model/varenr.: 254-1801

The engineers at ARP spent quite a bit of time developing these highly effective, unique oil pan studs. They're designed to make it as easy as possible to install a pan and seal it properly.

Fra: ARP
347,00  m/Moms
(277,60  u/Moms )
Lager: På lager
Model/varenr.: 254-1802

The engineers at ARP spent quite a bit of time developing these highly effective, unique oil pan studs. They're designed to make it as easy as possible to install a pan and seal it properly.

Fra: ARP
338,33  m/Moms
(270,66  u/Moms )
Lager: På lager
Model/varenr.: 254-1901

The engineers at ARP spent quite a bit of time developing these highly effective, unique oil pan studs. They're designed to make it as easy as possible to install a pan and seal it properly.

Fra: ARP
667,99  m/Moms
(534,39  u/Moms )
Lager: På lager
Model/varenr.: 254-1902

The engineers at ARP spent quite a bit of time developing these highly effective, unique oil pan studs. They're designed to make it as easy as possible to install a pan and seal it properly. You'll note that the studs have a radiused bullet nose that serves to locate the pan rails, then allow the nuts to be easily installed without the worry of cross-threading.

Fra: ARP
858,84  m/Moms
(687,07  u/Moms )
Lager: På lager
Model/varenr.: 254-1903

The engineers at ARP spent quite a bit of time developing these highly effective, unique oil pan studs. They're designed to make it as easy as possible to install a pan and seal it properly. You'll note that the studs have a radiused bullet nose that serves to locate the pan rails, then allow the nuts to be easily installed without the worry of cross-threading.

Fra: ARP
720,04  m/Moms
(576,03  u/Moms )
Lager: På lager
Model/varenr.: 254-1904

The engineers at ARP spent quite a bit of time developing these highly effective, unique oil pan studs. They're designed to make it as easy as possible to install a pan and seal it properly. You'll note that the studs have a radiused bullet nose that serves to locate the pan rails, then allow the nuts to be easily installed without the worry of cross-threading.

Fra: ARP
910,89  m/Moms
(728,71  u/Moms )
Lager: På lager
Model/varenr.: 254-5501

Here's just what you need to secure a bellhousing in place. The studs are designed with a radiused head to position the bellhousing and accept nuts without the fear of cross-threading.

Fra: ARP
10,41  m/Moms
(8,33  u/Moms )
Lager: På lager
Model/varenr.: 254-5601

Here's just what you need to secure a bellhousing in place. The studs are designed with a radiused head to position the bellhousing and accept nuts without the fear of cross-threading. There are many important reasons to use ARP main stud kits, including the elimination of main cap walk and fretting, as well as protecting the threads in your engine block

Fra: ARP
997,64  m/Moms
(798,11  u/Moms )
Lager: På lager
Model/varenr.: 454-1503

We have an assortment of premium quality stainless steel and black oxide finish 8740 chrome moly bolts for the most popular applications. Washers included.

Fra: ARP
546,54  m/Moms
(437,23  u/Moms )
Lager: På lager
Model/varenr.: 454-1504

We have an assortment of premium quality stainless steel and black oxide finish 8740 chrome moly bolts for the most popular applications. Washers included.

Fra: ARP
520,51  m/Moms
(416,41  u/Moms )
Lager: På lager
Model/varenr.: 454-1801

The engineers at ARP spent quite a bit of time developing these highly effective, unique oil pan studs. They're designed to make it as easy as possible to install a pan and seal it properly. You'll note that the studs have a radiused bullet nose that serves to locate the pan rails, then allow the nuts to be easily installed without the worry of cross-threading.

Fra: ARP
529,19  m/Moms
(423,35  u/Moms )
Lager: På lager
Model/varenr.: 454-1803

The engineers at ARP spent quite a bit of time developing these highly effective, unique oil pan studs. They're designed to make it as easy as possible to install a pan and seal it properly. You'll note that the studs have a radiused bullet nose that serves to locate the pan rails, then allow the nuts to be easily installed without the worry of cross-threading.

Fra: ARP
563,89  m/Moms
(451,11  u/Moms )
Lager: På lager
Model/varenr.: 454-1804

The engineers at ARP spent quite a bit of time developing these highly effective, unique oil pan studs. They're designed to make it as easy as possible to install a pan and seal it properly. You'll note that the studs have a radiused bullet nose that serves to locate the pan rails, then allow the nuts to be easily installed without the worry of cross-threading

Fra: ARP
520,51  m/Moms
(416,41  u/Moms )
Lager: På lager
Model/varenr.: 454-1902

  The engineers at ARP spent quite a bit of time developing these highly effective, unique oil pan studs. They're designed to make it as easy as possible to install a pan and seal it properly. You'll note that the studs have a radiused bullet nose that serves to locate the pan rails, then allow the nuts to be easily installed without the worry of cross-threading.

Fra: ARP
997,64  m/Moms
(798,11  u/Moms )
Lager: På lager
Model/varenr.: 154-5602

Here's just what you need to secure a bellhousing in place. The studs are designed with a radiused head to position the bellhousing and accept nuts without the fear of cross-threading. There are many important reasons to use ARP main stud kits, including the elimination of main cap walk and fretting, as well as protecting the threads in your engine block.

Fra: ARP
1.041,01  m/Moms
(832,81  u/Moms )
Lager: På lager
Model/varenr.: 154-5206

The ARP High Performance Main Bolt Kits are forged from premium 8740 chrome moly and all the bolts feature and generous under-head radius and heat treating for utmost reliability.

Fra: ARP
763,41  m/Moms
(610,73  u/Moms )
Lager: På lager
Model/varenr.: 154-5205

The ARP High Performance Main Bolt Kits are forged from premium 8740 chrome moly and all the bolts feature and generous under-head radius and heat treating for utmost reliability. The threads are rolled after heat treating, which makes them about 1000% stronger than most other main bolts. These bolts are nominally rated at 180,000 psi, and are a premium replacement for any OEM fastener.

Fra: ARP
737,39  m/Moms
(589,91  u/Moms )
Lager: På lager
Model/varenr.: 154-5612

Here's just what you need to secure a bellhousing in place. The studs are designed with a radiused head to position the bellhousing and accept nuts without the fear of cross-threading. There are many important reasons to use ARP main stud kits, including the elimination of main cap walk and fretting, as well as protecting the threads in your engine block

Fra: ARP
1.127,76  m/Moms
(902,21  u/Moms )
Lager: På lager
Model/varenr.: 154-5613

Here's just what you need to secure a bellhousing in place. The studs are designed with a radiused head to position the bellhousing and accept nuts without the fear of cross-threading. There are many important reasons to use ARP main stud kits, including the elimination of main cap walk and fretting, as well as protecting the threads in your engine block

Fra: ARP
1.145,11  m/Moms
(916,09  u/Moms )
Lager: På lager