Model/varenr.: -50255-V1
All you need to install bucket seats in your MX-5 NC  Compatible with most bucket seats available on the market. The lower plate has mounting points for crotch harness of 5 and 6-point racing seatbelts. A large number of installation holes allows setting rear-front and up-down seat position. 100% ...mere
Fra: Cybul
1.006,25 DKK  m/Moms
( 805,00 DKK  u/Moms )
Lager: På lager
Model/varenr.: -50395-V1
The maximum turning angle exceeds 70 degrees and it’s adjustable steplessly. Steering wheel “comes back” to its position as it’s supposed to.  The maximum turning angle exceeds 70 degrees. Thanks to adjustable limiters it can be set steplessly for both the leading and inner wheel. Such a solutio ...mere
Fra: Cybul
7.522,50 DKK  m/Moms
( 6.018,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50396-V1
The maximum turning angle exceeds 70 degrees and it’s adjustable steplessly. Steering wheel “comes back” to its position as it’s supposed to.   The maximum turning angle exceeds 70 degrees. Thanks to adjustable limiters it can be set steplessly for both the leading and inner ...mere
Fra: Cybul
7.521,25 DKK  m/Moms
( 6.017,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50397-V1
The maximum turning angle exceeds 70 degrees. Thanks to adjustable limiters it can be set steplessly for both the leading and inner wheel. Such a solution allows you to get maximum lock out of your wheel/tire set up. At the same time, there is no risk of tire scratching the frame. Correct steerin ...mere
Fra: Cybul
7.521,25 DKK  m/Moms
( 6.017,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50782-V1
Smoothly working, a super durable kit that transfers over 1100NM M60/M62 twin disc BMW M50/M52 gearbox conversion kit The most durable and smoothly working conversion kit for M60/M62 engines. Allows you to install gearbox from BMW with M50/M52 engine. This clutch will transfe ...mere
Fra: Cybul
18.805,00 DKK  m/Moms
( 15.044,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50783-V1
Smoothly working, a super durable kit that transfers over 1100NM   The most durable and smoothly working conversion kit for M60/M62 engines. Allows you to install gearbox from BMW with M57 engines (gearbox GS5-39DZ).  This clutch will transfer smoothly over 1100 NM. Just give us a chanc ...mere
Fra: Cybul
18.805,00 DKK  m/Moms
( 15.044,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50784-V1
Smoothly working, a super durable kit that transfers over 1100NM   1JZ/2JZ twin disc BMW M50/M52 gearbox conversion kit The most durable and smoothly working conversion kit for 1JZ/2JZ engines. Allows you to install gearbox from BMW with M50/M52. This clutch will transfer smooth ...mere
Fra: Cybul
17.910,00 DKK  m/Moms
( 14.328,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50785-V1
Smoothly working, a super durable kit that transfers over 1100NM   The most durable and smoothly working conversion kit for 1JZ/2JZ engines. Allows you to install gearbox from BMW with M57 engines (gearbox GS5-39DZ).  This clutch will transfer smoothly over 1100 NM. Just give us a chance t ...mere
Fra: Cybul
17.910,00 DKK  m/Moms
( 14.328,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50786-V1
Smoothly working, a super durable kit that transfers over 1100NM   RB26 twin disc BMW M50/M52 gearbox conversion kit The most durable and smoothly working conversion kit for RB26 engines. Allows you to install gearbox from BMW with M50/M52 engine. This clutch will transfer smoot ...mere
Fra: Cybul
17.910,00 DKK  m/Moms
( 14.328,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50787-V1
Smoothly working, a super durable kit that transfers over 1100NM   The most durable and smoothly working conversion kit for RB26 engines. Allows you to install gearbox from BMW with M57 engines (gearbox GS5-39DZ).  This clutch will transfer smoothly over 1100 NM. Just give us a chance to pro ...mere
Fra: Cybul
17.910,00 DKK  m/Moms
( 14.328,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50788-V1
Smoothly working, a super durable kit that transfers over 1100NM   1JZ/2JZ twin disc BMW M50/M52 gearbox conversion kit The most durable and smoothly working conversion kit for 1UZ engines. Allows you to install gearbox from BMW with M50/M52. This clutch will transfer smoothly o ...mere
Fra: Cybul
17.910,00 DKK  m/Moms
( 14.328,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50789-V1
Smoothly working, a super durable kit that transfers over 1100NM The most durable and smoothly working conversion kit for 1UZ engines. Allows you to install gearbox from BMW with M57 engines (gearbox GS5-39DZ).  This clutch will transfer smoothly over 1100 NM. Just give us a chance to pro ...mere
Fra: Cybul
17.910,00 DKK  m/Moms
( 14.328,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50790-V1
Smoothly working, a super durable kit that transfers over 1100NM LS twin disc BMW M50/M52 gearbox conversion kit The most durable and smoothly working conversion kit for LS engines. Allows you to install gearbox from BMW with M50/M52 engine. This clutch will transfer smoothly ...mere
Fra: Cybul
18.805,00 DKK  m/Moms
( 15.044,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50791-V1
Smoothly working, a super durable kit that transfers over 1100NM   The most durable and smoothly working conversion kit for LS engines. Allows you to install gearbox from BMW with M57 engines (gearbox GS5-39DZ).  This clutch will transfer smoothly over 1100 NM. Just give us a chance to ...mere
Fra: Cybul
18.805,00 DKK  m/Moms
( 15.044,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50793-V1
Transfers 60% more torque than the stock clutch disc. Big friction surface makes clutching smoother than normally in 4-pad sintered clutch plates. 228mm, fits M50 engine
Fra: Cybul
1.335,00 DKK  m/Moms
( 1.068,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50794-V1
Transfers 60% more torque than the stock clutch disc. Big friction surface makes clutching smoother than normally in 4-pad sintered clutch plates. 240mm, fits M30 and M52 engines.
Fra: Cybul
1.335,00 DKK  m/Moms
( 1.068,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: 847523882
All you need to convert your front suspension in E30 to 5×120. Allow conversion from standard steering knuckles to knuckles from a BMW E36. Cut from structural steel on a precise CNC laser and welded by an experienced welder.  The sleeves are welded in at an appropriate angle. This al ...mere
Fra: Cybul
2.230,00 DKK  m/Moms
( 1.784,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50796-V1
All you need to convert your front suspension in E30 to 5×120.   Allow conversion from standard steering knuckles to knuckles from a BMW E36. Cut from structural steel on a precise CNC laser and welded by an experienced welder.  The sleeves are welded in at an appropriate angle. This al ...mere
Fra: Cybul
2.677,50 DKK  m/Moms
( 2.142,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50797-V1
E30 front subframe reinforcement   Product designed to strengthen up neuralgic points of the front subframe.   Laser cut pieces fit perfectly stock subframe. Product designed for welding, raw steel.
Fra: Cybul
178,75 DKK  m/Moms
( 143,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50798-V1
They allow installation of extra calipers in BMW E30 and E36 compact. thanks to that you can make a separate braking system for a hydraulic handbrake.   Made on a CNC laser cutter, fit perfectly with rocker arm. Installation by welding. Compatible with BMW E30 and E36 compact calipers and rocker a ...mere
Fra: Cybul
313,75 DKK  m/Moms
( 251,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50799-V1
The solution that makes M60 / M62 swapping possible and easy. The kit solves all the problems that prevent a swap of the M60/M62 for a BMW E36 / Z3.   It allows you to adjust the rear-front position of the engine in the engine bay. The swap does not require a body or hood modification.   100% ...mere
Fra: Cybul
11.635,00 DKK  m/Moms
( 9.308,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50801-V1
The solution that makes M60 / M62 swapping possible and easy. The kit solves all the problems that prevent a swap of the M60/M62 for a BMW E46 / Z4.   It allows you to adjust the rear-front position of the engine in the engine bay. The swap does not require a body or hood modification.   100% ...mere
Fra: Cybul
11.635,00 DKK  m/Moms
( 9.308,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50802-V1
The solution that makes S62B50 swapping possible and easy. The kit solves all the problems that prevent a swap of the S62B50 engine into BMW E36 and Z3.   The kit allows you to adjust the rear-front position of the engine in the engine bay.   100% bolt on product – no welding is required.   ...mere
Fra: Cybul
15.756,25 DKK  m/Moms
( 12.605,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50803-V1
The solution that makes S62B50 swapping possible and easy. The kit solves all the problems that prevent a swap of the S62B50 engine into BMW E46 and Z4.   The kit allows you to adjust the rear-front position of the engine in the engine bay.   100% bolt on product – no welding is required.   ...mere
Fra: Cybul
15.756,25 DKK  m/Moms
( 12.605,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50804-V1
To allow swapping 1UZ-FE into E36 and E46   The 1UZ-FE rear oil pan was designed to make swapping 1UZ engine into E36 and E46 as easy as possible. Supplemented by our engine mounts it makes a nice swap kit for E36. Pan has extra capacity to prevent strainer from sucking in air. Improved ...mere
Fra: Cybul
6.261,25 DKK  m/Moms
( 5.009,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50805-V1
Allow adjustment of the camber in the rear suspension of E36 and E46.   Allow adjustment of the camber in the rear suspension of E36 and E46. Thanks to bulk thread construction, the operation does not require dismounting. Heavy-duty chromium-molybdenum rod ends have the highest durabili ...mere
Fra: Cybul
1.513,75 DKK  m/Moms
( 1.211,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50806-V1
Allow extra calipers installationThey allow installation of extra calipers in BMW E36 (excluding E36 compact), E46 and Z4. Thanks to that you can make a separate braking system for a hydraulic handbrake. Made on a CNC laser cutter, fit perfectly with rocker arm. Installation by welding. Compatible w ...mere
Fra: Cybul
313,75 DKK  m/Moms
( 251,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50811-V1
Allows adjustment of the right-left axle position. A must in any car with raised suspension. Lift draws axle sideways. The axle position adjustment is necessary to maintain good drive properties. Combination of polyurethane bushings with rod ends takes what’s best from both. Bushings abso ...mere
Fra: Cybul
2.052,50 DKK  m/Moms
( 1.642,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50813-V1
Adjustment allows you to set wheels in the middle of a fender. What’s more, you can set pinion angle. Control arms are a turnbuckle. This means that you can adjust their length without dismounting. Combination of polyurethane bushings with rod ends takes what’s best from both. Bus ...mere
Fra: Cybul
2.590,00 DKK  m/Moms
( 2.072,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50814-V1
Adjustment allows you to set wheels in the middle of a fender. What’s more, you can set pinion/caster angle. Control arms are a turnbuckle. This means that you can adjust their length without dismounting.   In the axle, you’ll have rubber or polyurethane bushings installed. Our arms are equipped ...mere
Fra: Cybul
2.590,00 DKK  m/Moms
( 2.072,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50815-V1
Adjustment allows you to set wheels in the middle of a fender. What’s more, you can set pinion/caster angle. Control arms are a turnbuckle. This means that you can adjust their length without dismounting.   In the axle, you’ll have rubber or polyurethane bushings installed. Our arms are equipped ...mere
Fra: Cybul
2.590,00 DKK  m/Moms
( 2.072,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50816-V1
Adjustment allows you to set wheels in the middle of a fender. What’s more, you can set pinion angle. Combination of polyurethane bushings with rod ends takes what’s best from both. Bushings absorb vibrations when rod ends allow for maximum flex without extra friction. In addition ...mere
Fra: Cybul
2.590,00 DKK  m/Moms
( 2.072,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50817-V1
Allows adjustment of the right-left axle position. A must in any car with raised suspension. Lift draws axle sideways. The axle position adjustment is necessary to maintain good drive properties. Made of high-hardness DOM tube, powder-coated to metallic graphite. Kit includes a Pa ...mere
Fra: Cybul
1.478,75 DKK  m/Moms
( 1.183,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50818-V1
Allows adjustment of the right-left axle position. A must in any car with raised suspension. Lift draws axle sideways. The axle position adjustment is necessary to maintain good drive properties. Combination of polyurethane bushings with rod ends takes what’s best from both. Bushings abso ...mere
Fra: Cybul
1.568,75 DKK  m/Moms
( 1.255,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50819-V1
Brings back the stock suspension geometry. Bolt on solution that brings back suspension geometry from before the lift.
Fra: Cybul
852,50 DKK  m/Moms
( 682,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50820-V1
Unlike stock mounts, these ones will not break!   Solve a common problem of TJ and ZJ – too weak front lower mounts of control arms to the axle. A must-have in any Jeep used in heavy terrain Laser cut, CNC bent structural steel ensures maximum strength and durability. Mounts hav ...mere
Fra: Cybul
440,00 DKK  m/Moms
( 352,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50821-V1
Unlike stock mounts, these ones will not break!   Solve a common problem of XJ – too weak lower mounts of control arms to the axle. A must have in XJ used in heavy terrain Laser cut, CNC bent structural steel ensures maximum strength and durability. All dimensions are exactly the same a ...mere
Fra: Cybul
440,00 DKK  m/Moms
( 352,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50822-V1
Allows adjustment of the right-left axle position. A must in any car with raised suspension. Lift draws axle sideways. The axle position adjustment is necessary to maintain good drive properties. Combination of polyurethane bushings with rod ends takes what’s best from both. Bushings abso ...mere
Fra: Cybul
1.605,00 DKK  m/Moms
( 1.284,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50823-V1
The most extreme arm solution for XJ, designed for hardcore off-road application.   This long arm set is the best solution for hardcore off-road application. You won’t believe how fast you can go through bumps after installing it. Long arms reduce wheel “skew” during suspension stroke. ...mere
Fra: Cybul
7.977,50 DKK  m/Moms
( 6.382,00 DKK  u/Moms )
Lager: Ikke på lager
Model/varenr.: -50824-V1
Allows adjustment of left-right axle position. Adjustable Panhard rod / track bar with a frame mount for Jeep XJ and ZJ   Allows adjustment of the right-left axle position. The stock rod end is a weak point of the rod. We replaced it with durable polyurethane bushing.   The Panhard rod is mad ...mere
Fra: Cybul
2.052,50 DKK  m/Moms
( 1.642,00 DKK  u/Moms )
Lager: Ikke på lager