Whether you're looking for products to protect your Starter, Battery, Muffler or Headers, Design Engineering has a custom fit solution. We design our products to solve heat issues, improve performance or protect many specific areas and components including Turbos, Air intake tubes, Fuel cans and many more.

 
DEI Can-Am Commander Heat Shield Kit
Model/varenr.: 010878
Feeling the heat in your Can-Am Commander? DEI's Can-Am Commander Heat Shield Kit is the best solution to block heat that would normally build up in the cockpit area. The end result creates a more cool and comfortable ride for you and your passenger. All 2 seat models 2011-2017 Blocks heat build ...mere
Fra: DEI
2.890,00 DKK  m/Moms
( 2.312,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Cell Saver - Battery Insulation Kit
Model/varenr.: 010480
Batteries are very susceptible to heat and vibration that could cause premature failure and hazardous leaks. Cell Saver™ is very capable of damping vibration and will absorb and neutralize any damaging leaky battery acids. Cell Saver™ is easy to install and excess material can be trimmed to accommod ...mere
Fra: DEI
278,75 DKK  m/Moms
( 223,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Cool Cover - Air Tube Cover Kit
Model/varenr.: 010417
Cool Cover is designed to prevent air tubes from becoming heat sinks. Made of heat treated glass fiber with a reflective coating, Cool Cover will reflect radiant heat from air tubes and promotes a cooler, denser, more powerful air charge. With a unique full length hook & loop closure design, Coo ...mere
Fra: DEI
796,25 DKK  m/Moms
( 637,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Cool Cover GOLD - Air-Tube Cover Kit
Model/varenr.: 010486
High temperature Metalized Polyimide lamination, bonded to a robust 20 oz. heat treated glass fiber base material, Cool Cover GOLD will reflect radiant heat from air tubes and promotes cooler, denser, more powerful air charge. With a unique full length hook & loop closure design, Cool Cover GOLD ...mere
Fra: DEI
852,50 DKK  m/Moms
( 682,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Corvette C7 Catalytic Converter Shield
Model/varenr.: 010069
Chevrolet located the engine oil cooler and oil filter on the C7 Corvette close to the driver side catalytic converter causing heat transfer into the engine oil. Possibly making the ECM send the car into limp mode. By installing our converter heat shield, we block this heat transfer and prevent the ...mere
Fra: DEI
1.051,25 DKK  m/Moms
( 841,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Corvette C7 Oil Cooler Line Cover
Model/varenr.: 010488
The DEI Oil Cooler Heat Shroud is designed to easily wrap around the oil cooler lines without disconnecting the lines making installation simple and easy. The result is greatly reducing harmful radiant heat from soaking into the oil cooler lines. Reduces oil temperature Helps prevent Z06 from go ...mere
Fra: DEI
246,25 DKK  m/Moms
( 197,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Dyno Strap Heat Guard
Model/varenr.: 010466
Protects Dynamometer tie-down straps from burn-through caused by exhaust exit heat Made of a hi-temp resistant aluminized mylar material Withstands 500°F direct / 2000°F radiant heat Easily slips over dyno tie down straps 36" long x 5" wide Direct Heat Resistance:: 500°F Radiant Heat Resis ...mere
Fra: DEI
340,00 DKK  m/Moms
( 272,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Grommet and Locking Tie Kit
Model/varenr.: 010223
When mounting heat shields or other materials it can be difficult to make it look professional. DEI has put together a complete Grommet and Tie kit: a heat shield mounting kit to make any install look first class. Included in the kit are 24 - 3/8” grommets, Grommet eyelet tool, Six 20” long stainles ...mere
Fra: DEI
287,50 DKK  m/Moms
( 230,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Heat Control Kit Complete Polaris Slingshot 15-16 SL LE
Model/varenr.: 010089
Polaris redefined the powersports market segment with the introduction of its three wheeled Slingshot™. With its compact design and 4 cylinder engine, the muffler, catalytic converter, and exhaust manifold all reside in close proximity to one another on the right side of the vehicle. This concentrat ...mere
Fra: DEI
2.512,50 DKK  m/Moms
( 2.010,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Hub and Rotor Cover
Model/varenr.: 010485
Protection from hot brake drums and rotors Prevents potential of serious burns or cuts Aluminized mylar adhered to glass fiber matting Withstands 2000°F radiant / 500°F of direct continuous heat Protection against dirt, dust & airborne particles around track or shop Measures 14" L x 7" W ...mere
Fra: DEI
778,75 DKK  m/Moms
( 623,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Jeep Fuel Rail & Injector Cover Kit
Model/varenr.: 010378
We have come up with a solution for a common heat soak & vapor lock problem in 1997-2004 Jeep models with inline 6 engines. DEI's Easy to install heat protection kit reduces heat soak on the fuel rail and injectors, in turn reducing vapor lock and keeping fuel cool. Fits 1997-2004 4.0L JEEP m ...mere
Fra: DEI
788,75 DKK  m/Moms
( 631,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Jeep JK Battery Box Kit
Model/varenr.: 010456
Complete kit to protect battery boxes and electrical connections from damaging heat. Includes two heat shields, hardware and detailed instructions. Protects battery box and electrical connections from heat damage while operating at slow off road speeds Heat from the passenger side exhaust can ri ...mere
Fra: DEI
582,50 DKK  m/Moms
( 466,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Mini Versa Shield Starter Shield
Model/varenr.: 010384
Mini Versa Shield was designed to protect starters from potential failure caused by under hood heat soak conditions. Constructed using an aluminized heat reflective material backed with a hi-temp rated glass fiber insulation barrier, Versa-Shield™ is capable of reflecting radiant heat up to 2000°F. ...mere
Fra: DEI
246,25 DKK  m/Moms
( 197,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Motorcycle Fairing / Bodywork Protection Kit
Model/varenr.: 010329
Tired of bubbling paint and scorched plastic on your ATV or motorcycle? DEI has come up with the perfect kit to protect against excess heat on any powersports vehicle. A mix of lightweight, flexible materials are included to form a reflective barrier against excess heat. Use the thicker dimpled F&am ...mere
Fra: DEI
772,50 DKK  m/Moms
( 618,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Motorcycle Fuel Tank Cover
Model/varenr.: 010465
Just as racers use tire warmers to maintain tire temperatures between sessions, it’s equally important to maintain stable fuel temperatures. Hot fuel results in less HP, increased fuel pump stress, and the increased risk of vapor lock. The DEI slip-on fuel tank cover is made from a 2mm felt backed M ...mere
Fra: DEI
1.051,25 DKK  m/Moms
( 841,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Muffler Shield Kit
Model/varenr.: 010455
The Best muffler shield/wrap on the market. Based off our proven Floor and Tunnel II heat shield, our new Muffler Shield is designed to wrap around just about any size muffler. Includes our tough Stainless Steel positive locking ties for a tight secure installation. Made from 10mil dimpled aluminum ...mere
Fra: DEI
570,00 DKK  m/Moms
( 456,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Quarter Midget Fuel Line Cover
Model/varenr.: 010634
DEI Fuel Line Cover Kit is a safe and easy way to make sure you pass technical inspection for any USAC - 1/4 Midget Race. Meets USAC requirements for fireproof fuel line cover as stated in current rule book Includes 1-1/2' of 3/8" ID silicone covered glass braided sleeving & 4 heat shrink sl ...mere
Fra: DEI
105,00 DKK  m/Moms
( 84,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Remote Cord Push Button Switch
Model/varenr.: 165031
The DEI Remote Cord Push Button Switch is precision made from the finest materials then meticulously tested to perform at the highest level possible. Great remote activation for any CryO2, nitrous system and purge activation. A good option instead of mounted buttons. Normally open switch state. Push ...mere
Fra: DEI
452,50 DKK  m/Moms
( 362,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Starter Shield - ONYX Series
Model/varenr.: 010236
Designed for severe duty use, ONYX™ Starter Shield offers the highest level of protection for starters from potential failure caused by under hood heat soak conditions. Constructed of two layers of material, a highly reflective outer layer combined with a high heat inner layer. Able to withstand dir ...mere
Fra: DEI
861,25 DKK  m/Moms
( 689,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Under Hood Thermal Acoustic Lining
Model/varenr.: 050510
DEI's Under Hood Thermal Acoustic Lining was designed primarily for automotive engine compartments as a way to greatly reduce heat and noise with a simple and easy peel and stick application. Extreme engine heat and noise often is a problem with today’s modified vehicles packed with high performance ...mere
Fra: DEI
916,25 DKK  m/Moms
( 733,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Versa Shield Starter Shield
Model/varenr.: 010402
Versa Shield was designed to protect starters from potential failure caused by under hood heat soak conditions. Constructed using an aluminized heat reflective material backed with a hi-temp rated glass fiber insulation barrier, Versa-Shield is capable of reflecting radiant heat up to 2000°F. Simply ...mere
Fra: DEI
361,25 DKK  m/Moms
( 289,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Corvette EGR 4.25in x 4.5in Pipe Cover 1985-1991
Model/varenr.: 010389
Protect 1985 through 1991 Corvette L98 EGR systems and nearby under hood components from damaging heat with the proper EGR Pipe Cover. DEI's sewn-in hook & loop edges makes for a quick and straightforward replacement without removing the EGR pipe. Just wrap the cover around EGR pipe and close ed ...mere
Fra: DEI
65,00 DKK  m/Moms
( 52,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Corvette EGR 11.5in x 4.5in Pipe Cover 1985-1991
Model/varenr.: 010387
Protect 1985 through 1991 Corvette L98 EGR systems and nearby under hood components from damaging heat with the proper EGR Pipe Cover. DEI's sewn-in hook & loop edges makes for a quick and straightforward replacement without removing the EGR pipe. Just wrap the cover around EGR pipe and close ed ...mere
Fra: DEI
168,75 DKK  m/Moms
( 135,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Corvette EGR 15in x 4.5in Pipe Cover 1985-1991
Model/varenr.: 010388
Protect 1985 through 1991 Corvette L98 EGR systems and nearby under hood components from damaging heat with the proper EGR Pipe Cover. DEI's sewn-in hook & loop edges makes for a quick and straightforward replacement without removing the EGR pipe. Just wrap the cover around EGR pipe and close ed ...mere
Fra: DEI
197,50 DKK  m/Moms
( 158,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Corvette C5 Trans Tunnel Plate + Side Heat Shield Kit
Model/varenr.: 050530
A well know and long time problem with many Corvettes is the amount of heat transferred into and through the console. DEI has the solution to dramatically reduce the amount of heat transferred to the Corvette C5 and C6 Transmission Tunnel Reinforcement Plates and into the vehicles’ interior. This sh ...mere
Fra: DEI
1.972,50 DKK  m/Moms
( 1.578,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Corvette C5 Trans Tunnel Plate Only
Model/varenr.: 050525
A well know and long time problem with many Corvettes is the amount of heat transferred into and through the console. DEI has the solution to dramatically reduce the amount of heat transferred to the Corvette C5 and C6 Transmission Tunnel Reinforcement Plates and into the vehicles’ interior. This sh ...mere
Fra: DEI
863,75 DKK  m/Moms
( 691,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Corvette C5 Trans Tunnel Side Shields Only
Model/varenr.: 050529
A well know and long time problem with many Corvettes is the amount of heat transferred into and through the console. DEI has the solution to dramatically reduce the amount of heat transferred to the Corvette C5 and C6 Transmission Tunnel Reinforcement Plates and into the vehicles’ interior. This sh ...mere
Fra: DEI
1.225,00 DKK  m/Moms
( 980,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Corvette C6 Trans Tunnel Plate + Side Heat Shield Kit
Model/varenr.: 050532
A well know and long time problem with many Corvettes is the amount of heat transferred into and through the console. DEI has the solution to dramatically reduce the amount of heat transferred to the Corvette C5 and C6 Transmission Tunnel Reinforcement Plates and into the vehicles’ interior. This sh ...mere
Fra: DEI
1.972,50 DKK  m/Moms
( 1.578,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Corvette C6 Trans Tunnel Plate Only
Model/varenr.: 050526
A well know and long time problem with many Corvettes is the amount of heat transferred into and through the console. DEI has the solution to dramatically reduce the amount of heat transferred to the Corvette C5 and C6 Transmission Tunnel Reinforcement Plates and into the vehicles’ interior. This sh ...mere
Fra: DEI
837,50 DKK  m/Moms
( 670,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Corvette C6 Trans Tunnel Side Shields Only
Model/varenr.: 050531
A well know and long time problem with many Corvettes is the amount of heat transferred into and through the console. DEI has the solution to dramatically reduce the amount of heat transferred to the Corvette C5 and C6 Transmission Tunnel Reinforcement Plates and into the vehicles’ interior. This sh ...mere
Fra: DEI
1.225,00 DKK  m/Moms
( 980,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Fuel Injector 2-Pack Covers - Universal
Model/varenr.: 010380
In hot temps, both performance and factory fuel injectors can be at risk of vapor lock or heat soak causing a rough idle, slow starting or other potential serious engine problems. DEI has the solution by introducing Fuel Injector Reflective Heat Covers available in packs of two, four, six or eight, ...mere
Fra: DEI
131,25 DKK  m/Moms
( 105,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Fuel Injector 4-Pack Covers - Universal
Model/varenr.: 010381
In hot temps, both performance and factory fuel injectors can be at risk of vapor lock or heat soak causing a rough idle, slow starting or other potential serious engine problems. DEI has the solution by introducing Fuel Injector Reflective Heat Covers available in packs of two, four, six or eight, ...mere
Fra: DEI
236,25 DKK  m/Moms
( 189,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Fuel Injector 6-Pack Covers - Universal
Model/varenr.: 010382
In hot temps, both performance and factory fuel injectors can be at risk of vapor lock or heat soak causing a rough idle, slow starting or other potential serious engine problems. DEI has the solution by introducing Fuel Injector Reflective Heat Covers available in packs of two, four, six or eight, ...mere
Fra: DEI
338,75 DKK  m/Moms
( 271,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Fuel Injector 8-Pack Covers - Universal
Model/varenr.: 010383
In hot temps, both performance and factory fuel injectors can be at risk of vapor lock or heat soak causing a rough idle, slow starting or other potential serious engine problems. DEI has the solution by introducing Fuel Injector Reflective Heat Covers available in packs of two, four, six or eight, ...mere
Fra: DEI
442,50 DKK  m/Moms
( 354,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI 2015-UP Yamaha G29 Golf Cart Muffler Shield
Model/varenr.: 010386
The Yamaha G Series golf carts are one of the most popular models for retirement communities and golf courses due to its durability and function. However, the compact engine design puts the muffler directly below the drivers seat. During periods of warm weather driving or a few minutes of idling, th ...mere
Fra: DEI
510,00 DKK  m/Moms
( 408,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI 2007-14 Yamaha G29Golf Cart Muffler Shield
Model/varenr.: 010385
The Yamaha G Series golf carts are one of the most popular models for retirement communities and golf courses due to its durability and function. However, the compact engine design puts the muffler directly below the drivers seat. During periods of warm weather driving or a few minutes of idling, th ...mere
Fra: DEI
420,00 DKK  m/Moms
( 336,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Honda Pioneer Auxillary Fan Kit
Model/varenr.: 010875
Does your Honda Pioneer have a heat problem? DEI now offers an auxiliary fan system to help evacuate the hot air that gets trapped in the engine compartment on the Honda® Pioneer SxS. Riders will welcome the cooling relief while slow going on trail rides or working on their property. A digital displ ...mere
Fra: DEI
4.082,50 DKK  m/Moms
( 3.266,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI Honda Pioneer Heat Shield Kit
Model/varenr.: 010874
  Tired of feeling the burn from your Honda® Pioneer? DEI now offers a heat shield kit that reduces the seat temperatures as well as blocking the heat radiating up through the seat belt holes. Also included, are two additional shields that protect the rear passenger foot well area. Installation is ...mere
Fra: DEI
1.148,75 DKK  m/Moms
( 919,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
DEI LS Engine Coil Pack Shield
Model/varenr.: 011001
DEI's LS Engine Coil Pack Heat Shield eliminates the need to relocate coils packs and prevents premature coil failure due to overheating. Easy to install precut shields install under the coil bracket reducing the radiant heat to the coils from the engine and exhaust. Works on factory and aftermarket ...mere
Fra: DEI
356,25 DKK  m/Moms
( 285,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e)
Miata - Door Vibration Damping Kit
Model/varenr.: 50296
Quiet your Miata with our premium Door Vibration Damping Kit. By adding Boom Mat damping material to the metal doors, you greatly reduce rattles, squeaks and vibrations. This creates a more comfortable interior with improved acoustics. Features: Easy to peel backing to make install simple Self ...mere
Fra: DEI
191,25 DKK  m/Moms
( 153,00 DKK  u/Moms )
Lager: På lager