AN10 Rollover vent valve
This product allows free ventilation until the fuel tank. Attached at an angle of about 90 degrees.
This is a stainless steel ball (by means of the force of gravity) seal and prevent fuel from escaping through the ventilation system. This valve is designed to be mounted on the top of the fuel tank. In the case of the fuel tank has a top plate, the valve may be mounted in the plate.
Fuel tank vent valves minimize the build up of pressure and allows the container to vent. without it becoming a danger to self or others, just remember to follow the installation instructions.
Ventillen to be led to the outside of the vehicle or is connected to an active carbon filter. Or before a pipe from the top of the valve and then to the outside. The valves should be located as close as possible to the rear / top of the container (Important vertically, with the ball at the bottom) so that during braking will burn thwarts move towards the front end of the container and away from the valve.
The mounting hole size is 14mm. for direct mounting in the tank.
Type: Part Number: AD70002
Finish: Black aluoxeret
Mounting material: Aluminum
Quantity: Sold individually.
Rollover vent valve, AN10, aluminum, Black.
There is no reviews yet. Be the first to write us your opinion