1303304053be4f53ad60d9f8144bd37b

ARP's L19 material (comparable to A1 Technologies H11 Tool Steel) is a premium steel that is processed to deliver superior strength and fatigue properties. L19 is a very high strength material compared with 8740 (standard ARP headstuds) and is capable of delivering a clamp load at 260,000 psi. It is primarily used in short track and drag racing applications where inertia loads exceed the clamping capability of ARP2000. Like most high strength, quench and temper steels - L19 requires special care during manufacturing to avoid hydrogen embrittlement. This material is easily contaminated and subject to stress corrosion. It must be kept well-oiled and not exposed to moisture. These come packaged individually wrapped in a special wax paper to prevent contact with moisture until ready to be used.

Model: -11083

Assembly Lubricant Usage
Engine assembly
Fastener installation

By: ARP
52,50  Incl. VAT
( 42,00  Excl. VAT )
Availability: Leadtime is 1-2 uger, hvis udsolgt. day(s)
Model: 203-4205
ARP Head bolte, til 2JZ-GTE    Extra stærke bolte til topstykket, giver sammen med en stål toppakning, den sidste sikring af dit topstykke.   -lavet af chromoly stål. -styrke og varme testet.        
By: ARP
1.795,50  Incl. VAT
( 1.436,40  Excl. VAT )
1.995,00  Incl. VAT
You save: 199,50
Availability: In stock
Model: 202-4303

HEAD STUD KIT - ARP (Nissan SR20DET)

By: ARP
1.769,00  Incl. VAT
( 1.415,20  Excl. VAT )
Availability: In stock
Model: 202-5402

Main STUD KIT - ARP (Nissan SR20DET)

1.045,65  Incl. VAT
( 836,52  Excl. VAT )
Availability: Out of stock
Model: 203-2802
These bolts are for use in Twin/Triple Disc clutch set-ups such as Tilton, etc.Flexplate and Flywheel Bolts play an important role in the performance and safety of race cars and street machines alike. Thats why ARP has developed these Bolts that are far superior to any OEM hardware. These Bolts ar ...more
By: ARP
330,00  Incl. VAT
( 264,00  Excl. VAT )
Availability: In stock
Model: ARP S50B32
ARP topbolt kit   For model.: BMW S50B32, EU Spec.
2.503,50  Incl. VAT
( 2.002,80  Excl. VAT )
Availability: Out of stock
Model: -5804
These head studs fit the following BMWs/engines 2001-2006 E46 M3 coupe & convertible2001-2002 MZ3 M Roadster & M Coupe (with S54 engine)2006-2008 MZ4 Z4 M Roadster & M Coupe   Mærke.: ARP Vare nummer.: 201-4303
2.676,16  Incl. VAT
( 2.140,93  Excl. VAT )
Availability: Leadtime is 4-7 dage, hvis det er lager vare day(s)
Model: 100-7715

Wheel Studs 

Set off 5pcs. M12x1,5

By: ARP
362,79  Incl. VAT
( 290,23  Excl. VAT )
Availability: Leadtime is 4-7 dage, hvis det er lager vare day(s)
Aerospace-quality slange fittings Mærke: ProLineType: Hose endFitting design: ULTRA-LIGHTWEIGHT design.Hose size: Adapter size: Adapter female/male: MaleFitting grader:  DegreeFitting finish: BLACK eloxeretFitting materiale: 6061 T-6 Aluminium
By: ARP
1.901,03  Incl. VAT
( 1.520,82  Excl. VAT )
Availability: Leadtime is 4-7 dage, hvis det er lager vare day(s)
Model: 202-4309

Topbolte fra ARP

Nissan Skyline R33 GTS-T, RB25

By: ARP
2.268,89  Incl. VAT
( 1.815,11  Excl. VAT )
Availability: Leadtime is 4-7 dage, hvis det er lager vare day(s)
Model: AR8900

ARP2000 BOLTE

By: ARP
71,20  Incl. VAT
( 56,96  Excl. VAT )
89,00  Incl. VAT
You save: 17,80
Availability: In stock
Model: 208-4702

ARP uses premium grade 8740 alloy that is heat treated to 200,000 p.s.i. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.

1.670,95  Incl. VAT
( 1.336,76  Excl. VAT )
Availability: In stock
Model: 200-6006

Connecting Rod Bolts, Pro Series, 8740 Chromoly Steel, Manley, Replacement, Set of 16

By: ARP
1.281,99  Incl. VAT
( 1.025,59  Excl. VAT )
Availability: Leadtime is 1-2 uger, hvis udsolgt. day(s)
Model: -45617-V1

Every ARP stud kit exceeds the most stringent aerospace specifications.

By: ARP
790,00  Incl. VAT
( 632,00  Excl. VAT )
Availability: Out of stock
Model: -45667-V1

ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality.

By: ARP
2.226,25  Incl. VAT
( 1.781,00  Excl. VAT )
Availability: Out of stock
Model: -45920-V1

All Custom Age 625+® studs are centerless ground, heat treated prior to thread rolling and machining, and are nominally rated at 270,000 psi. These fasteners deliver a 30% increase in tensile strength over the OEM Torque To Yield (TTY) head bolts.

By: ARP
9.123,75  Incl. VAT
( 7.299,00  Excl. VAT )
Availability: Out of stock
Model: -45941-V1

ARP 102-2803 SR20DET Flywheel Bolts

By: ARP
642,50  Incl. VAT
( 514,00  Excl. VAT )
Availability: Out of stock
Model: -46047-V1

ARP High Performance Rods Bolts are made from a premium grade 8740 allow chrome moly steel. This material is heat treated to provide a tensile strength in the 200,000 range, which is substantially stronger the OEM. Cycle testing shows that ARP High Performance Rods Bolts are nearly 5 times more reliable than stock Rod Bolts.

By: ARP
910,00  Incl. VAT
( 728,00  Excl. VAT )
Availability: Out of stock
Model: -47885-V1

These ARP Main Studs are manufactured from 8740 Chrome Moly steel, heat treated in-house to 200,000 psi tensile strength. The precision J-form threads are rolled after heat-treating to create a fastener that threads 1000% stronger than others. All Kits come complete with parallel-ground washers and aerospace quality nuts. Don't settle for anything less then the best.

By: ARP
1.676,25  Incl. VAT
( 1.341,00  Excl. VAT )
Availability: Out of stock
Model: -47895-V1

ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality.

By: ARP
2.002,50  Incl. VAT
( 1.602,00  Excl. VAT )
Availability: Out of stock
Model: -47896-V1

ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality.

By: ARP
6.567,50  Incl. VAT
( 5.254,00  Excl. VAT )
Availability: Out of stock
Model: -47901-V1

ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Then each Stud is placed vertically in special racks and precisely heat treated to 200,000 psi. This procedure ensures complete heat penetration and the results are far superior to those lesser quality Studs from other manufacturers. Also Remember, Studs provide more accurate and consistent torque loading.

By: ARP
2.211,25  Incl. VAT
( 1.769,00  Excl. VAT )
Availability: Out of stock
Model: -47922-V1

It is for good reason that virtually every top professional engine builder relies on ARP Pro Series head studs for their all-out competition powerplants. Simply stated, there's not a better stud setup on the market today. For openers, ARP uses a premium grade 8740 alloy that is rated far superior to aircraft quality. 

By: ARP
3.018,75  Incl. VAT
( 2.415,00  Excl. VAT )
Availability: Out of stock
Model: -47934-V1

It is for good reason that virtually every top professional engine builder relies on ARP Pro Series head studs for their all-out competition powerplants. Simply stated, there's not a better stud setup on the market today.

By: ARP
1.793,75  Incl. VAT
( 1.435,00  Excl. VAT )
Availability: Out of stock
Model: -47954-V1

ARP Main Stud Kit for RB26DET

By: ARP
2.282,50  Incl. VAT
( 1.826,00  Excl. VAT )
Availability: Out of stock
Model: -47966-V1

ARP uses premium grade 8740 alloy that is heat treated to 200,000 p.s.i. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best. Following heat treat, each stud is centerless ground to make it as close to perfectly concentric as possible.

By: ARP
1.978,75  Incl. VAT
( 1.583,00  Excl. VAT )
Availability: Out of stock
Model: -47976-V1

ARP main studs eliminate main cap walk and fretting as well as protecting the threads in your engine block.

By: ARP
1.281,25  Incl. VAT
( 1.025,00  Excl. VAT )
Availability: Out of stock
Model: -47987-V1

A large number of connecting rod manufacturers have chosen ARP bolts as standard equipment. They're proud to advertise their products as being equipped with ARP rod bolts. And for good reason. 

By: ARP
681,25  Incl. VAT
( 545,00  Excl. VAT )
Availability: Out of stock
Model: -48329-V1

ARP head stud kit for CA18DET motor
Great to install when changing to metal headgasket
Please torque down the head to around 75ft lbs of torque

By: ARP
1.968,75  Incl. VAT
( 1.575,00  Excl. VAT )
Availability: Out of stock
Model: -49180-V1
ARP Wheel Studs for Toyota 93-98 Supra TT / Lexus IS300 ARP's heat-treated 8740 chrome moly wheel Studs are a much-needed replacement for any car engaged in oval track or drag racing competition. They have a tensile strength of 200,000 psi and are able to easily handle the tremendous acceleration s ...more
By: ARP
376,25  Incl. VAT
( 301,00  Excl. VAT )
Availability: Out of stock
Model: -49539-V1
ARP Mitsubishi 2.0L 4G63 EVO4-9 Flywheel Bolt Kit
By: ARP
397,50  Incl. VAT
( 318,00  Excl. VAT )
Availability: Out of stock
Model: -49729-V1

Professionel styrke rengørings skum der nemt håndtere selv de værste pletter!

- Hurtigt reagerende skum, nedbryder hurtigt pletter.
- Tørre Hurtigt uden af efterlade klistrede rester
- Den smarte to trins spray hovede er perfekt for general rengøring eller plet fjernelse

148,75  Incl. VAT
( 119,00  Excl. VAT )
Availability: Out of stock
Model: -49894-V1
ARP manufactures replacement rod bolts for many popular import and domestic Sport Compact engines that are made of premium grade 8740 chrome moly steel and heat treated to 200,000 psi tensile strength. Threads are rolled after heat treat to ensure optimum fatigue strength. They are far superior to O ...more
1.158,75  Incl. VAT
( 927,00  Excl. VAT )
Availability: Out of stock
Model: -49896-V1
These Pro series flywheel bolt kits from ARP give you all that you need to bolt in your flywheel with confidence. They're much stronger than OEM hardware, are forged from aerospace alloy, and are heat-treated prior to thread rolling and machining. These bolts feature an exclusive, flat 12-point head ...more
By: ARP
758,75  Incl. VAT
( 607,00  Excl. VAT )
Availability: Out of stock
Model: -49897-V1
ARP high performance cylinder head stud kits are precision centerless-ground and thread-rolled to Mil-S-8879 specs. Their black oxide finish protects them from wear and corrosion, and ARP throws in hardened parallel washers for uniform load distribution and accurate torque readings. Keep your cylind ...more
By: ARP
3.018,75  Incl. VAT
( 2.415,00  Excl. VAT )
Availability: Out of stock
Model: -49898-V1
ARP's Head Studs are used by virtually every top professional engine builder. Simply stated, there’s not a better stud setup on the market today. These head studs are manufactured to exact tolerances, heat-treated, centerless-ground and thread rolled to ensure consistent clamping force strength and ...more
By: ARP
10.622,50  Incl. VAT
( 8.498,00  Excl. VAT )
Availability: Out of stock
Model: -49929-V1
Product Details Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after h ...more
By: ARP
2.377,50  Incl. VAT
( 1.902,00  Excl. VAT )
Availability: Out of stock
Model: -49930-V1
Product Details This ARP main stud set for the 24 valves M50-based 6 cylinder engines (including M50, M52, S50US and S52US) and eliminates main cap walk and fretting, as well as protects the threads in your engine block. Each stud is made using the best materials, process, design and engineering, w ...more
By: ARP
1.731,25  Incl. VAT
( 1.385,00  Excl. VAT )
Availability: Out of stock
Model: -50197-V1
PRODUCT DESCRIPTION ARP - 901-8600 - Ring compressor sleeve - 86.00mm ARP new ring compressors are CNC machined from 6061-T6 billet tube material and feature a true radius for each different bore diameter. What's more, they are relieved for wire O-rings on bottom. Type 3 anodizing is used for lo ...more
By: ARP
691,25  Incl. VAT
( 553,00  Excl. VAT )
Availability: Out of stock
Model: -50198-V1
PRODUCT DESCRIPTION ARP - 901-8650 - Ring compressor sleeve - 86.50mm ARP new ring compressors are CNC machined from 6061-T6 billet tube material and feature a true radius for each different bore diameter. What's more, they are relieved for wire O-rings on bottom. Type 3 anodizing is used for lo ...more
By: ARP
691,25  Incl. VAT
( 553,00  Excl. VAT )
Availability: Out of stock