1303304053be4f53ad60d9f8144bd37b
Model: -50255-V1
All you need to install bucket seats in your MX-5 NC   Compatible with most bucket seats available on the market. The lower plate has mounting points for crotch harness of 5 and 6-point racing seatbelts. A large number of installation holes allows setting rear-front and up-down seat pos ...more
838,75  Incl. VAT
( 671,00  Excl. VAT )
Availability: Out of stock
Model: -50395-V1
The maximum turning angle exceeds 70 degrees and it’s adjustable steplessly. Steering wheel “comes back” to its position as it’s supposed to.   The maximum turning angle exceeds 70 degrees. Thanks to adjustable limiters it can be set steplessly for both the leading and inner ...more
6.268,75  Incl. VAT
( 5.015,00  Excl. VAT )
Availability: Out of stock
Model: -50396-V1
The maximum turning angle exceeds 70 degrees and it’s adjustable steplessly. Steering wheel “comes back” to its position as it’s supposed to.   The maximum turning angle exceeds 70 degrees. Thanks to adjustable limiters it can be set steplessly for both the leading and inner ...more
6.267,50  Incl. VAT
( 5.014,00  Excl. VAT )
Availability: Out of stock
Model: -50397-V1
The maximum turning angle exceeds 70 degrees. Thanks to adjustable limiters it can be set steplessly for both the leading and inner wheel. Such a solution allows you to get maximum lock out of your wheel/tire set up. At the same time, there is no risk of tire scratching the frame. Correct ...more
6.267,50  Incl. VAT
( 5.014,00  Excl. VAT )
Availability: Out of stock
Model: -50782-V1
Smoothly working, a super durable kit that transfers over 1100NM M60/M62 twin disc BMW M50/M52 gearbox conversion kit The most durable and smoothly working conversion kit for M60/M62 engines. Allows you to install gearbox from BMW with M50/M52 engine. This clutch will transfe ...more
15.671,25  Incl. VAT
( 12.537,00  Excl. VAT )
Availability: Out of stock
Model: -50783-V1
Smoothly working, a super durable kit that transfers over 1100NM   The most durable and smoothly working conversion kit for M60/M62 engines. Allows you to install gearbox from BMW with M57 engines (gearbox GS5-39DZ).  This clutch will transfer smoothly over 1100 NM. Just give us a chanc ...more
15.671,25  Incl. VAT
( 12.537,00  Excl. VAT )
Availability: Out of stock
Model: -50784-V1
Smoothly working, a super durable kit that transfers over 1100NM   1JZ/2JZ twin disc BMW M50/M52 gearbox conversion kit The most durable and smoothly working conversion kit for 1JZ/2JZ engines. Allows you to install gearbox from BMW with M50/M52. This clutch will transfer smooth ...more
14.925,00  Incl. VAT
( 11.940,00  Excl. VAT )
Availability: Out of stock
Model: -50785-V1
Smoothly working, a super durable kit that transfers over 1100NM   The most durable and smoothly working conversion kit for 1JZ/2JZ engines. Allows you to install gearbox from BMW with M57 engines (gearbox GS5-39DZ).  This clutch will transfer smoothly over 1100 NM. Just give us a chance t ...more
14.925,00  Incl. VAT
( 11.940,00  Excl. VAT )
Availability: Out of stock
Model: -50786-V1
Smoothly working, a super durable kit that transfers over 1100NM   RB26 twin disc BMW M50/M52 gearbox conversion kit The most durable and smoothly working conversion kit for RB26 engines. Allows you to install gearbox from BMW with M50/M52 engine. This clutch will transfer smoot ...more
14.925,00  Incl. VAT
( 11.940,00  Excl. VAT )
Availability: Out of stock
Model: -50787-V1
Smoothly working, a super durable kit that transfers over 1100NM   The most durable and smoothly working conversion kit for RB26 engines. Allows you to install gearbox from BMW with M57 engines (gearbox GS5-39DZ).  This clutch will transfer smoothly over 1100 NM. Just give us a chance to pro ...more
14.925,00  Incl. VAT
( 11.940,00  Excl. VAT )
Availability: Out of stock
Model: -50788-V1
Smoothly working, a super durable kit that transfers over 1100NM   1JZ/2JZ twin disc BMW M50/M52 gearbox conversion kit The most durable and smoothly working conversion kit for 1UZ engines. Allows you to install gearbox from BMW with M50/M52. This clutch will transfer smoothly o ...more
14.925,00  Incl. VAT
( 11.940,00  Excl. VAT )
Availability: Out of stock
Model: -50789-V1
Smoothly working, a super durable kit that transfers over 1100NM The most durable and smoothly working conversion kit for 1UZ engines. Allows you to install gearbox from BMW with M57 engines (gearbox GS5-39DZ).  This clutch will transfer smoothly over 1100 NM. Just give us a chance to pro ...more
14.925,00  Incl. VAT
( 11.940,00  Excl. VAT )
Availability: Out of stock
Model: -50790-V1
Smoothly working, a super durable kit that transfers over 1100NM LS twin disc BMW M50/M52 gearbox conversion kit The most durable and smoothly working conversion kit for LS engines. Allows you to install gearbox from BMW with M50/M52 engine. This clutch will transfer smoothly ...more
15.671,25  Incl. VAT
( 12.537,00  Excl. VAT )
Availability: Out of stock
Model: -50791-V1
Smoothly working, a super durable kit that transfers over 1100NM   The most durable and smoothly working conversion kit for LS engines. Allows you to install gearbox from BMW with M57 engines (gearbox GS5-39DZ).  This clutch will transfer smoothly over 1100 NM. Just give us a chance to ...more
15.671,25  Incl. VAT
( 12.537,00  Excl. VAT )
Availability: Out of stock
Model: -50793-V1
Transfers 60% more torque than the stock clutch disc. Big friction surface makes clutching smoother than normally in 4-pad sintered clutch plates. 228mm, fits M50 engine
1.112,50  Incl. VAT
( 890,00  Excl. VAT )
Availability: Out of stock
Model: -50794-V1
Transfers 60% more torque than the stock clutch disc. Big friction surface makes clutching smoother than normally in 4-pad sintered clutch plates. 240mm, fits M30 and M52 engines.
1.112,50  Incl. VAT
( 890,00  Excl. VAT )
Availability: Out of stock
Model: 847523882
All you need to convert your front suspension in E30 to 5×120. Allow conversion from standard steering knuckles to knuckles from a BMW E36. Cut from structural steel on a precise CNC laser and welded by an experienced welder.  The sleeves are welded in at an appropriate angle. This al ...more
1.858,61  Incl. VAT
( 1.486,89  Excl. VAT )
Availability: Out of stock
Model: -50796-V1
All you need to convert your front suspension in E30 to 5×120.   Allow conversion from standard steering knuckles to knuckles from a BMW E36. Cut from structural steel on a precise CNC laser and welded by an experienced welder.  The sleeves are welded in at an appropriate angle. This al ...more
2.231,25  Incl. VAT
( 1.785,00  Excl. VAT )
Availability: Out of stock
Model: -50797-V1
E30 front subframe reinforcement   Product designed to strengthen up neuralgic points of the front subframe.   Laser cut pieces fit perfectly stock subframe. Product designed for welding, raw steel.
148,75  Incl. VAT
( 119,00  Excl. VAT )
Availability: Out of stock
Model: -50798-V1
They allow installation of extra calipers in BMW E30 and E36 compact. thanks to that you can make a separate braking system for a hydraulic handbrake.   Made on a CNC laser cutter, fit perfectly with rocker arm. Installation by welding. Compatible with BMW E30 and E36 compact calipers and rocker a ...more
261,25  Incl. VAT
( 209,00  Excl. VAT )
Availability: Out of stock
Model: -50799-V1
The solution that makes M60 / M62 swapping possible and easy. The kit solves all the problems that prevent a swap of the M60/M62 for a BMW E36 / Z3.   It allows you to adjust the rear-front position of the engine in the engine bay. The swap does not require a body or hood modification.   100% ...more
9.696,25  Incl. VAT
( 7.757,00  Excl. VAT )
Availability: Out of stock
Model: -50801-V1
The solution that makes M60 / M62 swapping possible and easy. The kit solves all the problems that prevent a swap of the M60/M62 for a BMW E46 / Z4.   It allows you to adjust the rear-front position of the engine in the engine bay. The swap does not require a body or hood modification.   100% ...more
9.696,25  Incl. VAT
( 7.757,00  Excl. VAT )
Availability: Out of stock
Model: -50802-V1
The solution that makes S62B50 swapping possible and easy. The kit solves all the problems that prevent a swap of the S62B50 engine into BMW E36 and Z3.   The kit allows you to adjust the rear-front position of the engine in the engine bay.   100% bolt on product – no welding is required.   ...more
13.130,00  Incl. VAT
( 10.504,00  Excl. VAT )
Availability: Out of stock
Model: -50803-V1
The solution that makes S62B50 swapping possible and easy. The kit solves all the problems that prevent a swap of the S62B50 engine into BMW E46 and Z4.   The kit allows you to adjust the rear-front position of the engine in the engine bay.   100% bolt on product – no welding is required.   ...more
13.130,00  Incl. VAT
( 10.504,00  Excl. VAT )
Availability: Out of stock
Model: -50804-V1
To allow swapping 1UZ-FE into E36 and E46   The 1UZ-FE rear oil pan was designed to make swapping 1UZ engine into E36 and E46 as easy as possible. Supplemented by our engine mounts it makes a nice swap kit for E36. Pan has extra capacity to prevent strainer from sucking in air. Improved ...more
5.217,50  Incl. VAT
( 4.174,00  Excl. VAT )
Availability: Out of stock
Model: -50805-V1
Allow adjustment of the camber in the rear suspension of E36 and E46.   Allow adjustment of the camber in the rear suspension of E36 and E46. Thanks to bulk thread construction, the operation does not require dismounting. Heavy-duty chromium-molybdenum rod ends have the highest durabili ...more
1.261,25  Incl. VAT
( 1.009,00  Excl. VAT )
Availability: Out of stock
Model: -50806-V1
Allow extra calipers installation They allow installation of extra calipers in BMW E36 (excluding E36 compact), E46 and Z4. Thanks to that you can make a separate braking system for a hydraulic handbrake.   Made on a CNC laser cutter, fit perfectly with rocker arm. Installation by welding. Comp ...more
261,25  Incl. VAT
( 209,00  Excl. VAT )
Availability: Out of stock
Model: -50811-V1
Allows adjustment of the right-left axle position. A must in any car with raised suspension. Lift draws axle sideways. The axle position adjustment is necessary to maintain good drive properties. Combination of polyurethane bushings with rod ends takes what’s best from both. Bushings abso ...more
1.710,00  Incl. VAT
( 1.368,00  Excl. VAT )
Availability: Out of stock
Model: -50813-V1
Adjustment allows you to set wheels in the middle of a fender. What’s more, you can set pinion angle. Control arms are a turnbuckle. This means that you can adjust their length without dismounting. Combination of polyurethane bushings with rod ends takes what’s best from both. Bus ...more
2.158,75  Incl. VAT
( 1.727,00  Excl. VAT )
Availability: Out of stock
Model: -50814-V1
Adjustment allows you to set wheels in the middle of a fender. What’s more, you can set pinion/caster angle. Control arms are a turnbuckle. This means that you can adjust their length without dismounting.   In the axle, you’ll have rubber or polyurethane bushings installed. Our arms are equipped ...more
2.158,75  Incl. VAT
( 1.727,00  Excl. VAT )
Availability: Out of stock
Model: -50815-V1
Adjustment allows you to set wheels in the middle of a fender. What’s more, you can set pinion/caster angle. Control arms are a turnbuckle. This means that you can adjust their length without dismounting.   In the axle, you’ll have rubber or polyurethane bushings installed. Our arms are equipped ...more
2.158,75  Incl. VAT
( 1.727,00  Excl. VAT )
Availability: Out of stock
Model: -50816-V1
Adjustment allows you to set wheels in the middle of a fender. What’s more, you can set pinion angle. Combination of polyurethane bushings with rod ends takes what’s best from both. Bushings absorb vibrations when rod ends allow for maximum flex without extra friction. In addition ...more
2.158,75  Incl. VAT
( 1.727,00  Excl. VAT )
Availability: Out of stock
Model: -50817-V1
Allows adjustment of the right-left axle position. A must in any car with raised suspension. Lift draws axle sideways. The axle position adjustment is necessary to maintain good drive properties. Made of high-hardness DOM tube, powder-coated to metallic graphite. Kit includes a Pa ...more
1.232,50  Incl. VAT
( 986,00  Excl. VAT )
Availability: Out of stock
Model: -50818-V1
Allows adjustment of the right-left axle position. A must in any car with raised suspension. Lift draws axle sideways. The axle position adjustment is necessary to maintain good drive properties. Combination of polyurethane bushings with rod ends takes what’s best from both. Bushings abso ...more
1.307,50  Incl. VAT
( 1.046,00  Excl. VAT )
Availability: Out of stock
Model: -50819-V1
Brings back the stock suspension geometry. Bolt on solution that brings back suspension geometry from before the lift.
710,00  Incl. VAT
( 568,00  Excl. VAT )
Availability: Out of stock
Model: -50820-V1
Unlike stock mounts, these ones will not break!   Solve a common problem of TJ and ZJ – too weak front lower mounts of control arms to the axle. A must-have in any Jeep used in heavy terrain Laser cut, CNC bent structural steel ensures maximum strength and durability. Mounts hav ...more
366,25  Incl. VAT
( 293,00  Excl. VAT )
Availability: Out of stock
Model: -50821-V1
Unlike stock mounts, these ones will not break!   Solve a common problem of XJ – too weak lower mounts of control arms to the axle. A must have in XJ used in heavy terrain Laser cut, CNC bent structural steel ensures maximum strength and durability. All dimensions are exactly the same a ...more
366,25  Incl. VAT
( 293,00  Excl. VAT )
Availability: Out of stock
Model: -50822-V1
Allows adjustment of the right-left axle position. A must in any car with raised suspension. Lift draws axle sideways. The axle position adjustment is necessary to maintain good drive properties. Combination of polyurethane bushings with rod ends takes what’s best from both. Bushings abso ...more
1.337,50  Incl. VAT
( 1.070,00  Excl. VAT )
Availability: Out of stock
Model: -50823-V1
The most extreme arm solution for XJ, designed for hardcore off-road application.   This long arm set is the best solution for hardcore off-road application. You won’t believe how fast you can go through bumps after installing it. Long arms reduce wheel “skew” during suspension stroke. ...more
6.647,50  Incl. VAT
( 5.318,00  Excl. VAT )
Availability: Out of stock
Model: -50824-V1
Allows adjustment of left-right axle position. Adjustable Panhard rod / track bar with a frame mount for Jeep XJ and ZJ   Allows adjustment of the right-left axle position. The stock rod end is a weak point of the rod. We replaced it with durable polyurethane bushing.   The Panhard rod is mad ...more
1.710,00  Incl. VAT
( 1.368,00  Excl. VAT )
Availability: Out of stock