Fra: AEM

Infinity PNP Ford Coyote Engines using Ford Engine Harness

10.505,00 DKK  m/Moms
( 8.404,00 DKK  u/Moms )

Plugs into the ford engine wiring harness on ford coyote race engines.

Model/varenr.: 30-3813
Vægt: 0,68 kg
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e)

AEM's FORD 5.0L COYOTE PLUG & PLAY "CONTROLS PACK" STYLE ADAPTER HARNESS (AEM PN 30-3813) FOR ITS INFINITY 708 PROGRAMMABLE STANDALONE ECU (PN: 30-7101) IS FOR RACING ENGINES WHICH ARE USING THE OEM FORD COYOTE ENGINE HARNESS. AEM’S COYOTE PLUG & PLAY ENGINE HARNESS ADAPTER PROVIDES RACERS AND ENGINE BUILDERS WITH THE ABILITY TO QUICKLY INSTALL THE INFINITY ECU ON A COYOTE ENGINE.

DELIVERS COMPLETE TUNING CONTROL FOR THE COYOTE
The Infinity ECU for the Ford Coyote engine has been used successfully in racing since its release a year ago, including on JPC Racing’s 2x record-setting Coyote Turbo drag car that set a new record after switching to the Infinity its first time out. It delivers complete tuning control including Ti-VCT variable cam timing (four cams), Drive-by-Wire (plug included on harness for quick integration of the Ford Drive-by-Wire pedal assembly), active CAN controls, dual on-board Lambda AFR control, dual knock control and speed density fueling to eliminate the MAF. A base map is available for the Coyote for quick start up.

A robust fuse and relay panel is integrated into the 30-3813 Coyote harness adapter. It includes relays for the radiator fan, coils, injectors, Infinity ECU, starter and fuel pump, and flying leads for starter, ECU controlled fuel pump, clutch-switch activated starter safety lockout, ignition switch and tachometer. CANbus support is included for the Electronic Power Assist Steering (EPAS) when using the Ford Racing M-3200-EPAS Boss 302R electronic steering rack, with minor additional wiring.

REQUIRED ITEMS
Two Bosch 4.2LSU sensors are required for Lambda feedback control (PN 30-2001). A MAP sensor (PN 30-2130-50 3.5BAR) and air inlet temp (AIT) sensor (PN 30-2010 3/8” NPT) is required for conversion to speed density. MAF is not supported. AEM offers higher pressure MAP sensors for high boost applications.

AEM recommends the purchase of its Infinity Auxiliary Sub Harness (PN 30-3510-00) for easy installation of the MAP and AIT. This sub harness connects to a connector with a High Performance DTM-Style 12-pin connector for adding common aftermarket sensors including fuel pressure, oil pressure, boost control solenoid and ethanol content. The expansion port also includes a sensor ground, 5v reference, power from relay and high side output for activating a solenoid, and switched inputs for auxiliary radiator fan, boost target and no-lift shift.

The 30-3813 Coyote wiring harness includes a connector to enable control of the Ford Racing Boss 302 Alternator Kit (Ford PN M-8600-M50BALT). Users who do not have this alternator may need to purchase it for proper connection.

The Drive-by Wire pedal assembly is not included with the 30-3813 Coyote wiring harness. For Drive-by-Wire integration the Ford pedal assembly (Ford PN BR3Z-95836-D) is required.

THE BENEFITS OF CONTROLLING FORD'S TiVCT WITH INFINITY
The Infinity ECU was the first programmable EFI system to deliver programmable variable cam timing (VCT) for the Ford Coyote TiVCT system. By controlling the Coyote's VCT on all four camshafts, tuners are able to create more peak power over no VCT or when tuning only intake variable cam tuning, and significantly more mid range. The following dyno plots were performed on a stock Ford Coyote engine, on the engine dyno at CPR in Gardena, CA, where tuning the intake and exhaust VCT netted a peak gain of 42.3 HP @ 6500 RPM and a mid range gain of 109.3 Horsepower @ 3900 RPM. The Coyote's torque gains are even more pronounced, showing a peak gain of 85.8 lbs/ft at 4,400 RPM, with the largest torque gain of 149.9 lbs/ft occurring at 3,700 RPM.

The engine tested was a 100% bone stock take out from a Mustang GT. The power and torque data shown is representative of optimized cam timing and not just sending the cams to their max advance/retard positions. The purpose of the testing we did was to show the changes in torque/power output based purely on optimizing airflow by varying both the intake and exhaust cams while maintaining the same AFRs and using the same ignition timing. We felt this was prudent as some competitor systems that also have EMS solutions for the Coyote aren’t able to do variable cam control and have attempted to downplay its real benefits. We feel these dyno results pretty clearly show how beneficial the Coyote variable cam system is.

As is shown, we first ran the engine with both the intake and exhaust cams at their resting positions (fully retarded for intake and fully advanced for exhaust). Fueling was adjusted to reach target AFR and a base timing value was established. We then started tuning the intake cams only and through a series of pulls, found optimized cam advance values that netted the best increases in torque/power output. We repeated this same process for the exhaust cams while also moving the intake cams. In each iteration, fueling was adjusted to account for increases in airflow in order to reach our target AFR. This is the typical process for variable cam tuning on any engine.

We ourselves were surprised by the results – especially the gains made by retarding the exhaust cams. We’ve done a lot of variable cam motors in the past and are used to seeing sizeable gains by advancing the intake cams. In most cases however, moving the exhaust cams has usually netted a decrease in torque output as there is fuel/air charge dilution by the exhaust gases. It’s common that variable exhaust cams are used much like EGR for emissions purposes by the OEMs so it was surprising when the Coyote made huge gains by varying the exhaust cams. It was very evident to us that varying both sets of cams was vital in getting the Coyote to its full power potential.

A Complete Standalone ECU for the Ford 5.0L Coyote Engine
The Infinity ECU combines with the Coyote Plug & Play engine harness adapter to retain full control of the engine’s TI-VCT variable cam timing control and Drive-by-Wire (DBW) system. The Infinity ECU is to our knowledge, the first standalone programmable ECU to deliver full control of all four of the Coyote’s variable valve camshafts and deliver programmable control of the Coyote’s drive-by-wire system. This capability provides tuners with the ability to take full advantage of the engine’s midrange power potential through the adjustment of all four camshafts anywhere in the RPM range, and create two drive-by-wire profiles for rain maps, pit lane limits and more. The Infinity Coyote adapter harness is compatible with factory sensors and injectors for simplified start up using the supplied base calibration on most applications (may vary based on engine set up and forced induction). AEM’s adapter harness also eliminates the restrictive factory mass airflow sensor (MAF) and airbox, making it an ideal harness solution for forced induction applications. Other key racing features include multiple boost control strategies, programmable nitrous control, on-the-fly map switching, programmable four-wheel speed traction control, launch control, flex fuel and multi fuel capability. It utilizes airflow (VE) based tuning, has up to 64GB data logging capacity and can transfer data at up to 480Mb/second. Its enclosure is sealed and suitable for engine bay mounting.

Plug & Play Engine Harness Adapter with Expansion Port
AEM’s sealed, weatherproof Plug & Play harness (sold separately from the ECU) includes dual Lambda connectors and adapters to easily convert to Bosch 4.2 LSU UEGO sensors, an AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a High Performance DTM-Style 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, boost control solenoid and ethanol content. The expansion port also includes a sensor ground, 5v reference, power from relay and high side output for activating a solenoid, and switched inputs for auxiliary radiator fan, boost target and no-lift shift. Terminated harnesses for AEM 4-Channel Ignition Coil Drives are integrated into the Coyote adapter harness, and an additional High Performance DTM-Style connector is included that allows users to wire in the fuel pump for control using the Infinity ECU.

Featurtes:

Ford 5.0L Coyote Plug & Play Engine Harness Adapter with Expansion Port

AEM’s Plug & Play harness for 5.0L Coyote engines includes Wideband O2 connectors and adapters for converting to Bosch 4.2 LSU UEGO sensors, an AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a DTM style 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, oil temperature and ethanol content sensor. The expansion port also includes a sensor ground, 5v reference, 12v power from relay and high side output for activating a relay or solenoid, a low side output for boost control and analog inputs for mode switch and no-lift shift. Harnesses for AEM 4-Channel Coil Drivers are integrated into the adapter harness, and an additional High Performance DTM-Style connector is included to allow users to wire the fuel pump to the Infinity for control of the unit.

The Infinity EMS delivers high-end engine control for the racing masses at a fraction of the cost. The Infinity Series 7 for 5.0L Ford Coyote race engines uses airflow-based tuning models to simplify start up and speed up the tuning process by eliminating many of the lookup and trim tables (Correction Tables) necessary in previous generation ECUs.

200MHz Processor and Real Time Operating System
Late model vehicle ECU’s all run on faster processors. The Infinity ECU is built around a latest-generation 32 bit floating point 200MHz automotive processor and Real Time Operating System (RTOS), which is capable of processing 400 MIPS (millions of instructions per second). By comparison, common competitive systems typically use 20MHz to 50MHz processors. To our knowledge, the Infinity ECU currently has the fastest processing speed of any aftermarket Motorsports ECU available. This allows the Infinity to do more, faster, in a more stable programming environment.

  • The Infinity’s 200MHz processor and RTOS makes the Infinity more responsive, for a better driving experience
  • The Infinity’s 200MHz processor and RTOS allows for more accurate ignition timing, which enables an engine to create more power
  • The Infinity’s faster processor allows it to perform more computational features with no sacrifice in processing performance
  • The Infinity’s RTOS ensures strategic processing with optimized load balancing. This means that tuning one feature will not affect the performance of another feature
  • Airflow model based (VE) tuning
  • ECU Set Up Wizard simplifies start up
  • Flex Fuel compatible
  • Multi fuel capable
  • Programmable Drive by wire
  • Variable valve control
  • Multiple boost control strategies
  • Programmable nitrous control
  • Map switching (on-the-fly)
  • Dual Internal wideband UEGO air/fuel controller
  • Dual knock sensing circuits
  • Data logging up to 64GB, up to 100 channels at 1KHz
  • Outputs to 3rd party dashes and data loggers
  • Industry leading data transfer speed (up to 480Mb/sec)
  • Integrated engine protection strategies
  • Sealed enclosure and IP67 rated comms ports

Specifications:

2-Stroke Engines

Yes

4-Stroke Engines

Yes

Cylinders

Up to 8

High Impedence Injectors

Up to 8

High Impedence Injectors (Sequential)

Up to 8

Low Impedence Injectors

Up to 8

Low Impedence Injectors(Sequential)

Up to 8

Coils (0-5V Falling Edge)

Up to 8

Digital Inputs

Up to 8

VR/Mag Inputs

Up to 6

Analog Voltage Inputs

Up to 17

Analog Temp Inputs

Up to 6

Knock Control

2-Channel

On Board Wideband Air/Fuel Controllers

2

Drive-By-Wire

Dual

H-Bridge Channels

2

High Side Outputs

Up to 2

Low Side Outputs

10

Low Side Outputs that can be PWM

10

4-Wire Stepper Motor Control

Yes

CAN Channels

2

Boost Control (RPM, Time, Gear, VSS, Switch Input, Flex Fuel Content)

Yes

Variable Cam Control

Up to 4

Engine Protection*

Yes

Launch Control

Yes

Nitrous Control

Up to 4-Stage

Traction Control

Up to 4-Wheel Speed

Data Logging

Up to 64GB

Weather Resistant Sealed Electronics

Yes

Connector Pins

129

Enclosure Dimensions

6.75" x 6" x 1.8"

Der er endnu ikke nogen anmeldelser her. Vi vil være glade for hvis du vil anmelde som den første.

Tilføj anmeldelse:
spacer