1303304053be4f53ad60d9f8144bd37b
Model: 40004
Spjældhuse 90 mm Finish: Poleret alu Svejse flange medfølger.
399,00  Incl. VAT
( 319,20  Excl. VAT )
1.099,00  Incl. VAT
You save: 700,00
Availability: In stock
Model: 660

Accufab's 65mm throttle body and spacer was designed to be used on the 1986-1993 Ford 5.0L Mustang. These products are made from high quality billet aluminum, no castings or coatings! Each billet part is CNC machined and then the exterior aluminum is polished to a mirror finish. The shafts are CNC machined from stainless steel and we use only the best bearings, bushings, screws and other component parts available. 

2.248,75  Incl. VAT
( 1.799,00  Excl. VAT )
Availability: Out of stock
Model: 661

Accufab\'s 70mm throttle body and spacer was designed to be used on the 1986-1993 Ford 5.0L Mustang. These products are made from high quality billet aluminum, no castings or coatings! Each billet part is CNC machined and then the exterior aluminum is polished to a mirror finish. The shafts are CNC machined from stainless steel and we use only the best bearings, bushings, screws and other component parts available. 

2.248,75  Incl. VAT
( 1.799,00  Excl. VAT )
Availability: Out of stock
Model: 662

Accufab's 75mm throttle body and spacer was designed to be used on the 1986-1993 Ford 5.0L Mustang. These products are made from high quality billet aluminum, no castings or coatings! Each billet part is CNC machined and then the exterior aluminum is polished to a mirror finish. The shafts are CNC machined from stainless steel and we use only the best bearings, bushings, screws and other component parts available. 

2.248,75  Incl. VAT
( 1.799,00  Excl. VAT )
Availability: Out of stock
Model: 663

Accufab's 80mm throttle body and blank spacer was designed to be used on the 1986-1993 Ford 5.0L Mustang. These products are made from high quality billet aluminum, no castings or coatings! Each billet part is CNC machined and then the exterior aluminum is polished to a mirror finish. The shafts are CNC machined from stainless steel and we use only the best bearings, bushings, screws and other component parts available. 

2.422,50  Incl. VAT
( 1.938,00  Excl. VAT )
Availability: Out of stock
Model: 664

Accufab's 90mm throttle body was designed to be used on the 1986-1993 Ford 5.0L Mustang. Our products are made from high quality billet aluminum, no castings or coatings! Each billet part is CNC machined and then the exterior aluminum is polished to a mirror finish. The shafts are CNC machined from stainless steel, the throttle blade is brass and we use only the best bearings, bushings, screws and other component parts available. 

2.508,75  Incl. VAT
( 2.007,00  Excl. VAT )
Availability: Out of stock
Model: 665

Accufab's 105mm throttle body is the largest diameter throttle body available for use on the1986-1993 Ford 5.0L Mustang. Our products are made from high quality billet aluminum, no castings or coatings! Each billet part is CNC machined and then the exterior aluminum is polished to a mirror finish. The shafts are CNC machined from stainless steel, the throttle blade is brass and we use only the best bearings, bushings, screws and other component parts available. 

2.941,25  Incl. VAT
( 2.353,00  Excl. VAT )
Availability: Out of stock
Model: 666

Accufab's 105mm throttle body is the largest diameter throttle body available for use on the1986-1993 Ford 5.0L Mustang. Our products are made from high quality billet aluminum, no castings or coatings! Each billet part is CNC machined and then the exterior aluminum is polished to a mirror finish. The shafts are CNC machined from stainless steel, the throttle blade is brass and we use only the best bearings, bushings, screws and other component parts available. 

3.287,50  Incl. VAT
( 2.630,00  Excl. VAT )
Availability: Out of stock
Model: 667

Accufab's 65mm throttle body and spacer was designed to be used on the 1986-1987 Buick Turbo Regal. These products are made from high quality billet aluminum, no castings or coatings! Each billet part is CNC machined and then the exterior aluminum is polished to a mirror finish. The shafts are CNC machined from stainless steel and we use only the best bearings, bushings, screws and other component parts available. 

2.595,00  Incl. VAT
( 2.076,00  Excl. VAT )
Availability: Out of stock
Model: 668

Accufab's 70mm throttle body and spacer was designed to be used on the 1986-1987 Buick Turbo Regal. These products are made from high quality billet aluminum, no castings or coatings! Each billet part is CNC machined and then the exterior aluminum is polished to a mirror finish. The shafts are CNC machined from stainless steel and we use only the best bearings, bushings, screws and other component parts available. 

2.595,00  Incl. VAT
( 2.076,00  Excl. VAT )
Availability: Out of stock
Model: 669

Accufab has two throttle body designs for the vehicles listed below: 

1996 - 1998 Mustang Cobra 
2001 Bullitt 

The first throttle body is our standard ELLIPTICAL single blade which flows 1284 cfm compared to the stock twin blade design which flows 1089 cfm. Dyno tests on a stock vehicle show a 5 to 7 hp gain. 

3.252,50  Incl. VAT
( 2.602,00  Excl. VAT )
Availability: Out of stock
Model: 670

The following Accufab throttle body has been designed for the vehicles listed below: 

1999 - 2001 Mustang Cobra 
2003 - 2004 Mach 1 

This Accufab throttle body easily bolts on to the stock, unmodified intake manifold and will increase total airflow with no unacceptable side effects, such as whistling or negative idle characteristics. Throttle response is greatly improved with the high quality component parts used. 

3.373,75  Incl. VAT
( 2.699,00  Excl. VAT )
Availability: Out of stock
Model: 671

Accufab has developed a high flow throttle body and power inlet for the 2003-2004 Cobra. Accufab's throttle body flows 1696 cfm compared to stock 1089 cfm. Our engineers tested the stock inlet or elbow and noticed that it's design was too restrictive to accept the additional airflow our throttle body moves. Hence, we developed an aftermarket performance inlet which allows the air to flow on a straighter path directly into the intake, accounting for the major increase in performance. 

5.190,00  Incl. VAT
( 4.152,00  Excl. VAT )
Availability: Out of stock
Model: 672

Accufab has developed new performance parts for the 2005-2006 Ford GT. The first, is a dual blade 75mm throttle body. The throttle body is made from the finest billet aluminum, polished to a mirror finish. It also features a stainless steel split shaft, brass blades and the highest quality bushings, bearings and screws. Dyno tests on a stock vehicle have shown an increase of 4 to 5hp. However, dyno tests on our Project GT, which has other performance modifications, showed an increase of 11hp! 

5.450,00  Incl. VAT
( 4.360,00  Excl. VAT )
Availability: Out of stock
Model: 673

If you would like to switch from a carburetor intake to electronic fuel injection (EFI), Accufab has developed two high flow throttle bodies to meet your needs. The Accufab 4150 and 4500 series throttle bodies are made from high quality billet aluminum and then polished to a mirror finish or anodized black, blue or red. 

4.585,00  Incl. VAT
( 3.668,00  Excl. VAT )
Availability: Out of stock
Model: 674

If you would like to switch from a carburetor intake to electronic fuel injection (EFI), Accufab has developed two high flow throttle bodies to meet your needs. The Accufab 4150 and 4500 series throttle bodies are made from high quality billet aluminum and then polished to a mirror finish or anodized black, blue or red. 

The Accufab 4150 flows 1215 CFM and has four 1-3/4" brass throttle plates. The Accufab 4500 flows 2128 CFM and has four 2-1/4" brass throttle plates. Both styles have high quality progressive linkage and use late model GM electronics (push-in style) are included. 

5.450,00  Incl. VAT
( 4.360,00  Excl. VAT )
Availability: Out of stock
Model: 675

Wilson Manifolds High Flow Throttle Bodies were developed using the latest computer modeling software and test equipment available to produce designs that yield the maximum flow per square inch of cross-sectional area. This results in maximum power for any given throttle body type and size. 

2.888,75  Incl. VAT
( 2.311,00  Excl. VAT )
Availability: Out of stock
Model: 676

Wilson Manifolds High Flow Throttle Bodies were developed using the latest computer modeling software and test equipment available to produce designs that yield the maximum flow per square inch of cross-sectional area. This results in maximum power for any given throttle body type and size. 

2.888,75  Incl. VAT
( 2.311,00  Excl. VAT )
Availability: Out of stock
Model: 677

Wilson Manifolds High Flow Throttle Bodies were developed using the latest computer modeling software and test equipment available to produce designs that yield the maximum flow per square inch of cross-sectional area. This results in maximum power for any given throttle body type and size. 

2.888,75  Incl. VAT
( 2.311,00  Excl. VAT )
Availability: Out of stock
Model: 678

Wilson Manifolds High Flow Throttle Bodies were developed using the latest computer modeling software and test equipment available to produce designs that yield the maximum flow per square inch of cross-sectional area. This results in maximum power for any given throttle body type and size. 

2.888,75  Incl. VAT
( 2.311,00  Excl. VAT )
Availability: Out of stock
Model: 679

Wilson Manifolds High Flow Throttle Bodies were developed using the latest computer modeling software and test equipment available to produce designs that yield the maximum flow per square inch of cross-sectional area. This results in maximum power for any given throttle body type and size. 

3.728,75  Incl. VAT
( 2.983,00  Excl. VAT )
Availability: Out of stock
Model: 680

Wilson Manifolds High Flow Throttle Bodies were developed using the latest computer modeling software and test equipment available to produce designs that yield the maximum flow per square inch of cross-sectional area. This results in maximum power for any given throttle body type and size. 

3.728,75  Incl. VAT
( 2.983,00  Excl. VAT )
Availability: Out of stock
Model: 681

Wilson Manifolds High Flow Throttle Bodies were developed using the latest computer modeling software and test equipment available to produce designs that yield the maximum flow per square inch of cross-sectional area. This results in maximum power for any given throttle body type and size. 

3.728,75  Incl. VAT
( 2.983,00  Excl. VAT )
Availability: Out of stock
Model: 682

Wilson Manifolds High Flow Throttle Bodies were developed using the latest computer modeling software and test equipment available to produce designs that yield the maximum flow per square inch of cross-sectional area. This results in maximum power for any given throttle body type and size. 

4.177,50  Incl. VAT
( 3.342,00  Excl. VAT )
Availability: Out of stock
Model: 683

Wilson Manifolds High Flow Throttle Bodies were developed using the latest computer modeling software and test equipment available to produce designs that yield the maximum flow per square inch of cross-sectional area. This results in maximum power for any given throttle body type and size. 

4.427,50  Incl. VAT
( 3.542,00  Excl. VAT )
Availability: Out of stock
Model: 8475237281877
82mm Electronic Throttle Body 82mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on inlet port flange Includes mating connector kit Technical Specs: See attached image. Further details on E-Throttle setup ...more
1.812,50  Incl. VAT
( 1.450,00  Excl. VAT )
Availability: Out of stock
Model: 8475237281878
54mm Electronic Throttle Body 54mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on inlet port flange Includes mating connector kit Technical Specs: See attached image. Further details on E-Throttle setup ...more
1.812,50  Incl. VAT
( 1.450,00  Excl. VAT )
Availability: Out of stock