Fra:
TiAL
TiAL MV-S 38MM - SORT
2.746,25 DKK
m/Moms
(
2.197,00 DKK
u/Moms
)
MV-S'en er mere kompakt end dens forgænger, F38 - Med en total højde 9,40cm. V-band flangen gør installer - og afmontering super let
| Spring Pressures | .3bar to 1.7bar Included |
Model/varenr.:
002953-1
Vægt:
2 kg
Lager:
Leveringstid er 1-2 uger, hvis udsolgt. dag(e)
Ikke på lager
| MV-S | Option |
| Flange Materials | 304L Stainless |
| Pipe Size | Inlet Flange: 1.75" OD, Outlet Flange: 1.50" OD |
| Colors | Black, Blue, Red, Purple, Silver |
| Spring Pressures | .3bar to 1.7bar Included |
| Thread | Air Ports (5): M10 x 1.0, Water Ports (2): M8 x 1.0 |
Included with every Tial MV-S:
MV-S Assembly
2 TiAL -4 AN removable water fittings
MV-S Valve Seat
Inlet V-band clamp & Flange
Outlet V-Band Clamp & Flange
2 TiAL Air Fittings
Plugs for unused air ports
Extra actuator springs
- High temp NiCrFe based alloy is used for valve and 347SS valve housing will offer longer product life compared to competing designs.
- High temperature silicone Nomex reinforced actuator diaphragm.
- 17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resist "relaxing" at temperature to 900F (483C).
- Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing.
- All Stainless Steel hardware.
- Mating weld flanges are 304L
- Color anodized aluminum actuator (Silver, Red, Blue, Purple, Black).
- 3 lower ports and two top ports for easy install, no need to rotate the actuator top at all, plugs included for unused ports.
- Ultra compact design fits in very tight spaces, the unit stands only 3.7" tall, more compact than any other external wastegate on the market today.
- V-Band inlet and outlet make install easy, flanges and clamps are in the box!
- Integrated -4 AN water cooling ports that cycle a small amount of coolant through the actuator top to keep the temperatures down in extreme conditions such as road racing. These are leak tested after installation from the factory and can be removed if not utilized.