The all new set up kits for the new HKS symmetry turbo sets GT900 (GT II 7467) and GT1000+ (GT II 8267) designed for the Nissan GT-R R35 are now released. The kit was designed to utilize the symmetry turbine layout, which is considered ideal, so the overwhelming high performance is expected.
This is the set up kit only, the GT900 turbo will need to be purchased separately! 14001-AK024
Main kit parts: Exhaust manifold, wastegate, front pipe, suction pipe, heat-resistant cast (52mm pipe), HKS GTII 50mm, SUS304 70>75mm, AL Buffed Pipe 70mm
Installation Notes
• The engine must be removed in order to install this product.
• This kit does NOT include the symmetry turbine set, fuel pump, injectors, F-CON, EVC, and engine parts.
• The factory boost setting of the Wastegate is approximately 90-100kPa.
• Modification of the stock water pipe is required.
• Modification of T/C heat insulator is required.
• This product is for a race use. HKS is not responsible for any damage of the engine and/or transmission
caused by use of this product.
• CAT must be removed in order to install this product; therefore, the vehicle with this product cannot drive in
a public road.
• The warranty of the vehicle from a dealer may be void after installing this product.
• The symmetry turbo set is not included in this product.
Nissan | GT-R | R35 | 2009 | 2011 | VR38DETT | 3.8L - 4WD Petrol |
Nissan | GT-R | R35 | 2010 | 2012 | VR38DETT | 3.8L - 4WD Petrol |
Nissan | GT-R | R35 | 2010 | 2011 | VR38DETT | 3.8L SpecV - 4WD Petrol |
Nissan | GT-R | R35 | 2011 | VR38DETT | 3.8L - 4WD Petrol | |
Nissan | GT-R | R35 | 2014 | 3.8L Nismo - 4WD Petrol |