Cleans injectors, carburetors, valve and combustion chamber deposits with a concentrated blend of the most powerful high-temp and low-temp detergents available Cleans to nearly 100% efficiency in one treatment Reduces need for octane by up to two points Contains syn ...mere

FUEL SYSTEM WATER REMOVER & ANTIFREEZE Removes water from diesel or gasoline systems, treats up to 250 gallons Significantly reduces the freezing point of water in the fuel system Also provides excellent fuel lubrication Can be used in combination with SI-1 Compl ...mere

DIESEL WATER WETTER Designed for heavy-duty diesel engines which use more than 33% antifreeze or a supplemental corrosion package Similar properties and benefits to regular WaterWetter, but lacks rust and corrosion inhibitors Diesel road cars and light trucks (equipped wi ...mere

Compatible with both petroleum and synthetic gear oils Reduces break-in temps as much as 50°F Add 1oz at a time to clutch-type limited slip or posi-traction units to eliminate chatter Fully-synthetic formulas created from polyol ester base stocks, offer excellent lu ...mere

ENGINE OIL BREAK-IN ADDITIVE Provides conventional motor oils with antiwear additives like zinc and phosphorus (ZDDP) necessary to protect against camshaft and valvetrain damage on break-in Allow pistons rings to seat properly with less-slick oil, while antiwear additives protect other engines ...mere

Our most concentrated diesel product, popular for semis, agricultural, fleet tanks Cleans and lubricates injectors, pumps, and rings, improving efficiency up to 5% 15oz treats 100 gallons/gallon treats 850 gallons for a strong clean up dose All Red Line Diesel addit ...mere

Our most concentrated diesel product, popular for semis, agricultural, fleet tanks Cleans and lubricates injectors, pumps, and rings, improving efficiency up to 5% 15oz treats 100 gallons/gallon treats 850 gallons for a strong clean up dose All Red Line Diesel addit ...mere

Prevents valve seat damage in engines designed for leaded gasoline Prolongs the useful life of older engines without updated valve seats Also cleans carburetor deposits and injectors, safe for catalytic converters. For racing, marine, or off-road use only one bottle treats up to 25 gallons ...mere

Concentrated, high-temp detergents clean your carburetors or fuel injectors, fuel lines, tank, intake valves, combustion chambers, fouled plugs Improves fuel economy, throttle response, hesitation and stalling Compatible with both pump gas and race fuel, pre-mixed or injecte ...mere

Designed for use in all diesel engines - compensates for latest low-sulfur fuels Diesel Fuel Catalyst and 85 Plus are products with the same chemistry Promotes better fuel combustion and fuel system lubrication Provides faster ignition, reduced detonation and smoke, improved efficiency. Powerf ...mere

• Prevents gelling and corrosion in methanol and nitromethane fuel systems

• Lubricates upper cylinder and fuel system, increases power with more ring seal

• Replaces lubrication lost by wash of dry fuels

• Not detectable by normal fuel tests, mixes with only slight agitation

• Use 1oz per 5 gallons, one bottle treats up to 55 gallons

• Do not use with catalytic converters


 

RED LINE ALCOHOL FUEL LUBE is a high performance synthetic which is designed to provide maximum power and reduce wear. Methanol and other alcohols are extremely ‘dry’ and will wash conventional lubricants away from the cylinder walls and valve guides. Red Line Alcohol Fuel Lube contains lubricants that will displace alcohol on steel and aluminum surfaces and are combined with anti-scuff additives to reduce ring wear and piston scuffing under extreme washdown.

Directions: Two ounces per 10 US gallons will reduce will reduce fuel friction by 32% and reduce fuel wear (steel on steel) by 63%. Four ounces per 10 US gallons will reduce fuel friction by 32% and reduce fuel wear by 75%. This is a significant improvement over Castor lubricants and other synthetics on the market. Do not use with catalytic converters.

Alkoholbrændstof (E85, Ethanol & Methanol) er meget tørt og ru. Dette fører til slid på injektorer, brændstofpumpe og cylindre.

SI-Alcohol er udviklet til at forhindre slid og korrosion under de mest krævende forhold.