Topsælgere
-
Populær
-
5,00 DKK m/Moms( 4,00 DKK u/Moms )
-
12,50 DKK m/Moms( 10,00 DKK u/Moms )
-
Populær3,75 DKK m/Moms( 3,00 DKK u/Moms )
-
Populær46,25 DKK m/Moms( 37,00 DKK u/Moms )
-
Populær71,25 DKK m/Moms( 57,00 DKK u/Moms )
Model/varenr.:
-50825-V1
Super durable, cancel toe in-out change during suspension stroke.
Revolutionary solution – steering rods are separate from each other.
It completely changes the suspension behavior. Unlike in stock solution toe in/out does not change during suspension stroke. It improves handling and steering
...mere
Fra:
Cybul
Model/varenr.:
-50826-V1
Adjustment allows you to set the wheel position and adjust pinion/caster angle.
Adjustable heavy duty control arms are a must in any off-road car. Why? Let us explain.
The pinion/caster angle is responsible for shaft vibration and good handling. It changes after lifting the suspension
...mere
Fra:
Cybul
Model/varenr.:
847523914
Improve rigidity and drive safety.
Door bars for Mazda MX5 NA/NB – roll bar extension.
Significantly improve chassis rigidity. At the same time, you’re safer during side crush. They stiffen your Miata in it’s weakest point – where it has no roof to hold it together.
Made of FI
...mere
Fra:
Cybul
Model/varenr.:
847523915
A safety device that protects occupants if the vehicle overturns. A must have in any track used Miata.
Roll bar “V” for Mazda MX5 NA/NB
It’s most wanted roll bar from our offer. Significantly improves drive safety in the MX5. Lowest price combined with top quality makes it our be
...mere
Fra:
Cybul
Model/varenr.:
847523918
Improve rigidity and drive safety.
Door bars for Mazda MX5 NA/NB – roll bar extension.
Significantly improve chassis rigidity. At the same time, you’re safer during side crush. They stiffen your Miata in it’s weakest point – where it has no roof to hold it together.
Made of F
...mere
Fra:
Cybul
Model/varenr.:
847523920
Improve rigidity and drive safety.
Door bars for Mazda MX5 NA/NB – as separate product.
Significantly improve chassis rigidity. At the same time, you’re safer during side crush. They stiffen your Miata in it’s weakest point – where it has no roof to hold it together.
Made of F
...mere
Fra:
Cybul
Model/varenr.:
847523919
A safety device that protects occupants if the vehicle overturns. A must have in any track used Miata.
It’s the toughest MX5 roll bar in our offer. For your safety and best looks it’s entirely made of 45×2,5 tubes.
You can order it in most RAL colors in matt or glossy finish. This model, as the on
...mere
Fra:
Cybul
Model/varenr.:
847523921
A safety device that protects occupants if the vehicle overturns. A must have in any track used Miata.
First of all, it’ll look great on your Miata. We’ll custom powder coat it for You in most RAL colors in matt or glossy finish. Now you know, that final effect will match your expectations.
...mere
Fra:
Cybul
Model/varenr.:
-50835-V1
Increase body stiffness and protect longitudinal members.
Frame rails increase the body rigidity and reduce the body “twist” by about 30%. They also protect the longitudinal members from mechanical damage. Laser cut from 2mm-thick stainless steel plate, bent on CNC machines.
A perfect
...mere
Fra:
Cybul
Model/varenr.:
-50836-V1
Mount of a shoulder part of 4-point safety belts.
Harness bar for Mazda MX5 NA/NB
This product allows you to mount shoulder part of 4-point safety belts. It comes with alloy sleeve required for proper mounting.
100% bolt on solution – no welding, cutting and drilling is requir
...mere
Fra:
Cybul
Model/varenr.:
-50837-V1
Frog arms significantly improve chassis rigidity for better steering.
Made of high-hardness tubes and laser cut plate bent on a CNC machine. Welded by an experienced welder.
Included in the kit is a set of bolts and nuts and installation plates. The installation in your car does n
...mere
Fra:
Cybul
Model/varenr.:
-50838-V1
Allow mounting of a bucket seat in Miata.
Compatible with most bucket seats available on the market. A large number of installation holes allows setting rear-front and up-down seat position.
In the lowest position, the seat touches the floor. Even a very tall driver will find an optimum position
...mere
Fra:
Cybul
Model/varenr.:
-50839-V1
Increase chassis stiffness by over 20%
Product designed to stiffen up your Miata chassis. It ties up both sides of the car in it’s weakest point – under the tunnel.
Butterfly brace reduces chassis flex by over 20%. It’s something you’ll feel immediately. After installing steering response is
...mere
Fra:
Cybul
Model/varenr.:
-50840-V1
Significantly increases the stiffness of the chassis. Developed for MX5 owners who like pushing their Miatas to the limit. Perfect for track application.
Laser cut, 3mm construction steel was combined with a precise seamless tube. All to guarantee maximum rigidity that’s so important in a
...mere
Fra:
Cybul
Model/varenr.:
-50842-V1
Allows adjustment of the right-left axle position. A must in any car with raised suspension. Lift draws axle sideways. The axle position adjustment is necessary to maintain good drive properties.
Made of high-hardness barstock, powder coated to metallic graphite.
Fits Nissan Patro
...mere
Fra:
Cybul
Model/varenr.:
-50845-V1
Allows adjustment of the right-left axle position. A must in any car with raised suspension. Lift draws axle sideways. The axle position adjustment is necessary to maintain good drive properties.
Made of high-hardness barstock, powder coated to metallic graphite.
Fits Nissan Patro
...mere
Fra:
Cybul
Model/varenr.:
-50846-V1
Allows adjustment of the right-left axle position. A must in any car with raised suspension. Lift draws axle sideways. The axle position adjustment is necessary to maintain good drive properties.
Made of high-hardness barstock, powder coated to metallic graphite.
Fits Nissan Patro
...mere
Fra:
Cybul
Model/varenr.:
-50851-V1
Replaceable rod ends lower service cost.
Made of high-hardness precision seamless tube, much stronger than stock rods. Stock steering rods have been replaced with chromium-molybdenum rod ends. They strength more than 200 000N. The rod ends are resistant to vibration and weather conditions.
...mere
Fra:
Cybul
Model/varenr.:
-50852-V1
Replaceable rod ends lower service cost.
Made of high-hardness precision seamless tube, much stronger than stock rods. Stock steering rods have been replaced with chromium-molybdenum rod ends. They strength more than 200 000N. The rod ends are resistant to vibration and weather conditions.
...mere
Fra:
Cybul
Model/varenr.:
-50853-V1
Replaceable rod ends lower service cost.
Made of high-hardness precision seamless tube, much stronger stock rod. In contrast to an original steering rod, our product has two replaceable ends.
As a result, you lower repair costs – if one of the ends is damaged, you can replace it. Ther
...mere
Fra:
Cybul
Model/varenr.:
-50855-V1
Replaceable rod ends lower service cost.
Made of high-hardness precision seamless tube, much stronger stock rod. In contrast to an original steering rod, our product has two replaceable ends.
As a result, you lower repair costs – if one of the ends is damaged, you can replace it. Ther
...mere
Fra:
Cybul
Model/varenr.:
-50856-V1
Heavy-duty, much stronger than a stock rod.
Made of high-hardness precision seamless tube, much stronger stock rod.
The rod length adjustment is turnbuckle-based. This means that the steering wheel position can be set steplessly.
Powder coated to metallic grey graphite. The kit includes
...mere
Fra:
Cybul
Model/varenr.:
-50857-V1
Adjustment allows you to set the wheel position and adjust pinion/caster angle.
Allow a step-less adjustment of pinion/caster angle in order to eliminate shaft vibration which appears after suspension lift. You can also adjust the front-rear position of the wheel so it’s in the fender center.
...mere
Fra:
Cybul
Model/varenr.:
-50858-V1
Adjustment allows you to set the wheel position and adjust pinion/caster angle.
Allow a step-less adjustment of pinion/caster angle in order to eliminate shaft vibration which appears after suspension lift. You can also adjust the front-rear position of the wheel so it’s in the fender center.
...mere
Fra:
Cybul
Model/varenr.:
-50859-V1
Adjustment allows you to set the wheel position and adjust pinion/caster angle.
Allow a step-less adjustment of pinion/caster angle in order to eliminate shaft vibration which appears after suspension lift. You can also adjust the front-rear position of the wheel so it’s in the fender center.
...mere
Fra:
Cybul
Model/varenr.:
-50860-V1
Adjustment allows you to set the wheel position and adjust pinion/caster angle.
Allow a step-less adjustment of pinion/caster angle in order to eliminate shaft vibration which appears after suspension lift. You can also adjust the front-rear position of the wheel so it’s in the fender center.
...mere
Fra:
Cybul
Model/varenr.:
-50861-V1
Lowers the mounting point of front control arms. Brings back the stock suspension geometry. A must-have in any Patrol with lifted suspension!
Lowers the mounting points of front radius arms. A must-have in Patrol with lifted suspension.
During the lift camber/pinion angle changes. It
...mere
Fra:
Cybul
Model/varenr.:
-50862-V1
Adjustment allows setting correct length for lifted suspension.
Adjustment allows setting correct length for lifted suspension.
Struts and rod ends are made of chromium-molybdenum. All to provide maximum durability.
Links are equipped with polyurethane bushings that are durabl
...mere
Fra:
Cybul
Model/varenr.:
-50863-V1
Adjustment allows you to set the wheel position and adjust pinion/caster angle.
Rear lower Heavy Duty adjustable control arms for Toyota Land Cruiser 150.
They are a must in any off-road car. Why? Let us explain.
The pinion/caster angle is responsible for shaft vibration and g
...mere
Fra:
Cybul
Model/varenr.:
-50864-V1
Adjustment allows you to set the wheel position and adjust pinion/caster angle.
Rear upper Heavy Duty adjustable control arms for Toyota Land Cruiser 150.
They are a must in any off-road car. Why? Let us explain.
The pinion/caster angle is responsible for shaft vibration and g
...mere
Fra:
Cybul
Model/varenr.:
-50865-V1
Allows left-right axle position adjustment.
Allows adjustment of the right-left axle position. A must in any car with raised suspension. Lift draws axle sideways. The axle position adjustment is necessary to maintain good drive properties.
Eye-to-eye distance 1007mm-1070mm.
Ma
...mere
Fra:
Cybul
Model/varenr.:
-50866-V1
Heavy-duty, allows you to adjust pinion/caster angle.
Adjustment allows you to set wheels in the middle of a fender. What’s more, you can set pinion/caster angle.
Control arms are a turnbuckle. This means that you can adjust their length without dismounting.
In the axle, you’ll have rubber o
...mere
Fra:
Cybul
Model/varenr.:
-50867-V1
Heavy-duty, allows you to adjust wheel position and pinion angle.
Adjustment allows you to set wheels in the middle of a fender. What’s more, you can set pinion angle.
Combination of polyurethane bushings with rod ends takes what’s best from both. Bushings absorb vibrations when rod e
...mere
Fra:
Cybul
Model/varenr.:
-50868-V1
Super durable, cancel toe in-out change during suspension stroke.
Revolutionary solution – steering rods are separate from each other.
It completely changes the suspension behavior. Unlike in stock solution toe in/out does not change during suspension stroke. It improves handling and steering
...mere
Fra:
Cybul
Model/varenr.:
-50869-V1
Super durable, cancel toe in-out change during suspension stroke.
Revolutionary solution – steering rods are separate from each other.
It completely changes the suspension behavior. Unlike in stock solution toe in/out does not change during suspension stroke. It improves handling and steering
...mere
Fra:
Cybul
Model/varenr.:
-50870-V1
Super durable, cancel toe in-out change during suspension stroke.
Revolutionary solution – steering rods are separate from each other.
It completely changes the suspension behavior. Unlike in stock solution toe in/out does not change during suspension stroke. It improves handling and steering
...mere
Fra:
Cybul
Model/varenr.:
-50871-V1
A must-have in any rally and drift used car.
Handbrake requires a separate braking system – with extra calipers.
Leaver is steplessly adjustable in the range of 0-90 degrees. Handbrake has a flap that you can undo permanently. Thanks to the flap hand brake is lockable.
Locking
...mere
Fra:
Cybul
Model/varenr.:
E8XE9XARMS
Allow adjustment of the camber and toe-in/toe-out in the rear suspension of BMW E8X and E9X. Thanks to bulk thread construction, the operation does not require dismounting.
A big range of adjustment allows setting the proper geometry in cars with any height of the suspension. It is possible to incr
...mere
Fra:
Cybul