High Pressure sensor for Liquid. Use for Fuel, Clutch, Brake etc. 140 Bar/2030PSI 45degree cone seat M10x1 Thread Includes mating connector kit Technical Specs: Up to 2030 PSI above atmospheric pressure, cannot be used to read vacuum

Two sensors in one - Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg C L Liquid Temperature sensor. Suitable for Oil, Coolant, Fuel, Transmission fluid etc. Up to 10.0 bar (145PSI/1000kpa) Pressure Sensor for Liquid -40 to 140°C (-40 to 284°F) Temperature sensor for Liquid ...mere

Link's new G4+ external E-throttle (Drive by Wire) module works with Link's G4+ Storm, Kurofune and PlugIN ECUs to give you full control of your throttle setup, allowing a faster more precise throttle response.    Replace your old mechanical throttle linkage with an advanced electronic throttle mo ...mere

Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of ethanol to petrol in a flex fuel vehicle. This sensor also measures fuel temperature. Compatible with all current Link Wire-In and Plug-In ECU’s. Uses 1 Digital input on the ECU ...mere

Donut style 8mm hole Includes plug and pin kit 

Oil or Fuel pressure 10 Bar/150psi 1/8” NPT Thread Includes plug and pin kit Technical Specs and Wiring Up to 150 PSI above atmospheric pressure, cannot be used to read vacuum 0.5v = 0bar / 0PsiG 4.5v = 10 Bar / 145.03PsiG   

Throttle Position Sensor. Supports clockwise and counter-clockwise installations. 6 wire flying lead.  Wiring instructions are provided in the box. Features   8 mm D-Shaft Rotary Sensor Hall Effect non-contact technology Long life - extremely robust IP68 prote ...mere