HKS V-Cam Step 1 RB26DETT IN 248°

Variable Valve Timing System allows the classic RB26 to become a new generation engine. "V CAM SYSTEM" & "VALCON type RB26" are combined as an affordable set!!

• The intake cam side of the RB26DETT is changed to allow variable valve timing. The cam has duration of 248° which seem a little conservative. However, with the variable timing, power increases can be found at low or high RPM
• Whether you are looking to find some time on the circuit through improve acceleration out of lower speed corners, or simply want something which can overtake with ease on the street, the HKS V Cam System provides good power from low RPM reducing the necessity for excessive gear changes. This especially noticeable when going from vacuum to boost to give the feeling of increased displacement.
• Improved valve timing will allow for more complete combustion leading to improved fuel efficiency and cleaner exhaust emissions.
• HKS V CAM System is compatible with the stock pistons. (When using with the thinner head gaskets or modified cylinder head, the clearance between valve and piston may be insufficient.)
• Exhaust Cam should be selected dependant on turbo choice.
  (Recommended: GT-SS-256°, GT2530-264°)

With "VALCON type RB26". Maximum variance 30°,compatible with stock pistons. *Cylinder head facing or thin head gasket could cause contact with valve and piston.

Valve Lift: 8.6mm

Valve Timing: 90°～120°

HKS put all their know-how knowledge into engine parts from the data they have acquired from the drag race, round race, time attack and drift race. The HKS team provide Engine tuning ranging from Camshafts, Pulleys, Pistons and Rods to Timing Belts, Pump Upgrades and even Head Gaskets. The concept behind HKS engine products was to produce something the customers would truly be happy with.