Topsælgere
-
-
Populær215,00 DKK m/Moms( 172,00 DKK u/Moms )
-
12,50 DKK m/Moms( 10,00 DKK u/Moms )
-
Populær46,25 DKK m/Moms( 37,00 DKK u/Moms )
-
Populær132,50 DKK m/Moms( 106,00 DKK u/Moms )
-
600,00 DKK m/Moms( 480,00 DKK u/Moms )
Model/varenr.:
FTBF
Bright-dipped green anodized aluminum bulkhead fittings.
NOTES:-The 20-0170 6AN ORB with 8.5mm Barb to 6AN Male Bulkhead Fitting was introduced in Radium Fuel Surge Tanks after 2014. It includes a preassembled Viton O-ring and requires a 6AN ORB (9/16-18 threaded hole) with SAE chamfer to be drill
...mere
Fra:
Radium
Model/varenr.:
20-0146
This block-off plate kit is used when the 5-bolt flanged fuel level sensor is not used on fuel cells from ATL, Fuel Safe, Pyrotect, Harmon, Jaz, etc. This kit is also extensively used for customers with the Radium Fuel Cell Surge Tank.
Includes:
-Anodized 1/8" Aluminum Blank Plate-5 Bolt Sending U
...mere
Fra:
Radium
Model/varenr.:
140-197-431-M
This complete system combines a competition-grade fuel cell with Radium's innovative Fuel Cell Surge Tank. The fuel cell comes fully assembled and pressure tested.To configure a system follow these steps:1. Select the fuel cell bladder type, see information below about the different bladders.2. Conf
...mere
Fra:
Radium
Model/varenr.:
UFLS
Float-style fuel level sending units with standard SAE 5-bolt mounting pattern. Easy to install using the supplied hardware and Deutsch connectors (gauge not included). Fits most fuel cells including ATL, Fuel Safe, Pyrotect, Harmon, Jaz, etc. and extensively used with the Radium Fuel Cell Surge Tan
...mere
Fra:
Radium
Model/varenr.:
ITFCB
This collector box is used in fuel cells or large fill plate tanks to protect against fuel slosh. The in-tank fuel pump or pickup tube is inserted into the container and the check valves serve as trap doors keeping fuel contained in the box no matter what direction the vehicle is shifting. The 20-01
...mere
Fra:
Radium
Model/varenr.:
20-0150
This collector box is used in fuel cells or large fill plate tanks to protect against fuel slosh. The in-tank fuel pump or pickup tube is inserted into the container and the check valves serve as trap doors keeping fuel contained in the box no matter what direction the vehicle is shifting. The 20-01
...mere
Fra:
Radium
Model/varenr.:
20-0213
This collector box is used in fuel cells or large fill plate tanks to protect against fuel slosh. The in-tank fuel pump or pickup tube is inserted into the container and the check valves serve as trap doors keeping fuel contained in the box no matter what direction the vehicle is shifting. The 20-01
...mere
Fra:
Radium
Model/varenr.:
20-0155
This kit can be used for all fuel cells that use a 24-bolt (6x10) fill plate including FuelSafe, ATL, Jaz, Harmon, Pyrotect, etc. and is included in the Radium FCST. Depending on the amount of fill plate accessories, the original mounting tabs may not suffice. Fortunately, this design uses 12 fill p
...mere
Fra:
Radium
Model/varenr.:
18-0019
This gasket is used for Radium fuel cell fill necks. The 1/16" thick material is a premium quality variation of FKM Viton. It uses 6 equally-spaced holes with a 2.18" bolt center.
Fra:
Radium
Model/varenr.:
18-0020
This gasket is used for many fuel cell level senders. 5-bolt pattern. The 1/16" thick material is a premium quality variation of FKM Viton.
Fra:
Radium
Model/varenr.:
20-0278
Fuel cell 6x10 inch, 24-bolt weld flange. CNC machined from 6061 billet aluminum and flycut to 0.24" thickness. Includes a new Radium 18-0015 6x10 24-bolt Viton gasket. Holes are tapped for 1/4"-28 fasteners.
Fra:
Radium
Model/varenr.:
18-0015
Radium Engineering gasket for "industry standard" 6x10 inch (24-bolt) fuel cells. Unlike others constructed from cork or paper, this seal is die cut from a premium quality varation of FKM Viton. The Radium gasket is 1/16" thick and reuseable. Compatible with the Radium Fuel Cell Surge Tank.
Fra:
Radium
Model/varenr.:
FFNHK
This wire reinforced hose is designed specifically for fuel filling. The ID is 2-1/4" making it ideal for many applications including the Radium 20-0147 Remote Mount Fill Neck, shown below. The hose is used to connect to a body-mounted filler, such as THIS ONE from Fuel Safe.
Unlike silicone fuel
...mere
Fra:
Radium
Model/varenr.:
20-0176
The FPDs can be mounted at any possible angle including upside down. For best results, the damper should be mounted directly onto the fuel rail(s). This product is safe for use with all fuel types including alcohol blends such as E85
The anodized aluminum housing features two selectable threaded ma
...mere
Fra:
Radium
Model/varenr.:
20-0177
The FPDs can be mounted at any possible angle including upside down. For best results, the damper should be mounted directly onto the fuel rail(s). This product is safe for use with all fuel types including alcohol blends such as E85
The anodized aluminum housing features two selectable threaded ma
...mere
Fra:
Radium
Model/varenr.:
20-0178
The FPDs can be mounted at any possible angle including upside down. For best results, the damper should be mounted directly onto the fuel rail(s). This product is safe for use with all fuel types including alcohol blends such as E85
The anodized aluminum housing features two selectable threaded ma
...mere
Fra:
Radium
Model/varenr.:
20-0179
The FPDs can be mounted at any possible angle including upside down. For best results, the damper should be mounted directly onto the fuel rail(s). This product is safe for use with all fuel types including alcohol blends such as E85
The anodized aluminum housing features two selectable threaded ma
...mere
Fra:
Radium
Model/varenr.:
20-0459
Fitting Threads: 8AN ORB maleApplication: Nissan VQ35HR Fuel Pulse DamperNissan VQ37VHR Fuel Pulse DamperNissan VQ40DE Fuel Pulse DamperNissan VR38DETT Fuel Pulse Damper etc. Required: Fuel rail must have a 8AN ORB female threaded port.
Fra:
Radium
Model/varenr.:
20-0460
Fitting Threads: 8AN ORB maleApplication: Nissan RB26DETTNissan RB25DETNissan SR20DETNissan KA24DENissan CA18DETSaab 9-2X Aero 2.5LSubaru EJ20 GC8 WRXSubaru EJ25 GR WRXMazda RX-7 13B etc.Required: Fuel rail must have a 8AN ORB female threaded port.
Fra:
Radium
Model/varenr.:
20-0301
Fitting Threads: 8AN ORB maleApplication: Toyota 2JZ-GTEToyota 2RZ-FEToyota 3RZ-FEToyota 4E-FTEToyota 4A-GZEToyota 4A-GEToyota 4A-GELUMitsubishi EVOX 4B11TSaab 9-2X Aero 2.0LSubaru EJ20 GDA WRXMazda MX-5 BP etc. Required: Fuel rail must have a 8AN ORB female threaded port.
Fra:
Radium
Model/varenr.:
20-0199-06
The opening and closing of fuel injectors creates pressure pulses in the fuel rail which can lead to unstable fuel pressure. In order to achieve a safe and consistent rail pressure, a fuel pulse damper (FPD) is often necessary. The FPD's internal diaphragm will absorb oscillating pulses and stabiliz
...mere
Fra:
Radium
Model/varenr.:
20-0302
Fitting Threads: 8AN ORB maleApplication: Mitsubishi EVO VIIIMitsubishi EVO IX etc.Required: Fuel rail must have a 8AN ORB female threaded port.
Fra:
Radium
Model/varenr.:
20-0303
These anodized billet 6061 aluminum adapter fittings allow an OEM fuel pressure regulator (FPR) or fuel pulse damper (FPD) to be reused in an application other than the OEM fuel rail. All fittings permit the unit to be clocked into the proper position.
Fra:
Radium
Model/varenr.:
20-0199-08
The opening and closing of fuel injectors creates pressure pulses in the fuel rail which can lead to unstable fuel pressure. In order to achieve a safe and consistent rail pressure, a fuel pulse damper (FPD) is often necessary. The FPD's internal diaphragm will absorb oscillating pulses and stabiliz
...mere
Fra:
Radium
Model/varenr.:
14-0125
Fitting Threads: 3/8" NPT maleApplication: Toyota 2JZ-GTEToyota 2RZ-FEToyota 3RZ-FEToyota 4E-FTEToyota 4A-GZEToyota 4A-GEToyota 4A-GELUMitsubishi EVOX 4B11TSaab 9-2X Aero 2.0LSubaru EJ20 GDA WRXMazda MX-5 BP etc. Required: Fuel rail must have a 3/8" NPT female threaded port. PTFE sealing paste. Each
...mere
Fra:
Radium
Model/varenr.:
20-0199-10
The opening and closing of fuel injectors creates pressure pulses in the fuel rail which can lead to unstable fuel pressure. In order to achieve a safe and consistent rail pressure, a fuel pulse damper (FPD) is often necessary. The FPD's internal diaphragm will absorb oscillating pulses and stabiliz
...mere
Fra:
Radium
Model/varenr.:
20-0200-06
The opening and closing of fuel injectors creates pressure pulses in the fuel rail which can lead to unstable fuel pressure. In order to achieve a safe and consistent rail pressure, a fuel pulse damper (FPD) is often necessary. The FPD's internal diaphragm will absorb oscillating pulses and stabiliz
...mere
Fra:
Radium
Model/varenr.:
20-0200-08
The opening and closing of fuel injectors creates pressure pulses in the fuel rail which can lead to unstable fuel pressure. In order to achieve a safe and consistent rail pressure, a fuel pulse damper (FPD) is often necessary. The FPD's internal diaphragm will absorb oscillating pulses and stabiliz
...mere
Fra:
Radium
Model/varenr.:
20-0200-10
The opening and closing of fuel injectors creates pressure pulses in the fuel rail which can lead to unstable fuel pressure. In order to achieve a safe and consistent rail pressure, a fuel pulse damper (FPD) is often necessary. The FPD's internal diaphragm will absorb oscillating pulses and stabiliz
...mere
Fra:
Radium
Model/varenr.:
14-0128
This OEM quality damper features a 3/8" NPT male thread with impregnated pipe thread paste.The opening and closing of the injectors creates pulses in the fuel rail, which can lead to unstable fuel pressure. This damper should be used (especially with high flow injectors) in order to achieve a safe a
...mere
Fra:
Radium
Model/varenr.:
18-0018
RADIUM FPD-R (fuel pulse damper, range)RADIUM FPD-XR (fuel pulse damper, extra range)
Fra:
Radium
Model/varenr.:
14-0369
Allows connection of a 3AN hose to the vacuum port on certain Radium products. CNC machined from black zinc-plated steel for added strength.Compatible with the following Radium products ONLY:1. MPR Fuel Pressure Regulators2. DMR Fuel Pressure Regulators3. FST-R Fuel Surge Tanks4. FPD-XR Fuel Pulse D
...mere
Fra:
Radium
Model/varenr.:
14-0165
Fitting Threads: 3/8" NPT maleApplication: Nissan RB26DETTNissan RB25DETNissan SR20DETNissan KA24DENissan CA18DETSaab 9-2X Aero 2.5LSubaru EJ20 GC8 WRXSubaru EJ25 GR WRXMazda RX-7 13B etc.Required: Fuel rail must have a 3/8" NPT female threaded port. PTFE sealing paste. Each end of the adapter fitti
...mere
Fra:
Radium
Model/varenr.:
14-0285
Fitting Threads: 8AN ORB maleApplication: Toyota 1JZ-GTE Non VVT-iToyota 1JZ-GTE VVT-iToyota 3S-GTEToyota 1UZ-FEMazda RX-7 FC Series 4 etc.Required: Fuel rail must have a 8AN ORB female threaded port.
Fra:
Radium
Model/varenr.:
Walbro F90000262
Dual channel turbine design for maximum efficiency under high pressure and high temperature applications. Made in USA by TI Automotive (parent company of Walbro). All pumping components have been validated to OEM specifications for approved use in gasoline applications only. 100% Authentic & Gen
...mere
Fra:
Radium
Model/varenr.:
20-0210
Fitting Threads: 8AN ORB male. Two piece design that uses 14-0125 and 20-0209.Application: Toyota 2JZ-GTEToyota 2RZ-FEToyota 3RZ-FEToyota 4E-FTEToyota 4A-GZEToyota 4A-GEToyota 4A-GELUMitsubishi EVOX 4B11TSaab 9-2X Aero 2.0LSubaru EJ20 GDA WRXMazda MX-5 BPRequired: Fuel rail must have a 8AN ORB femal
...mere
Fra:
Radium
Model/varenr.:
20-0014
Fitting Threads: 6AN ORB high pressure female ports (in/out). 6AN male male low pressure return port. 1/8" NPT female port.Application: Audi 1.8L TurboFord Falcon BA, BF, FG XR6 TurboFord Territory TurboVolkswagen 1.8L Turbo etc. Required: Mounts external to the fuel rail. A mounting location is req
...mere
Fra:
Radium
Model/varenr.:
Walbro F90000274
Dual channel turbine design for maximum efficiency under high pressure and high temperature applications. Made in USA by TI Automotive (parent company of Walbro). All pumping components have been validated to OEM specifications for approved use in E85/flex fuel applications. 100% Authentic & Gen
...mere
Fra:
Radium
Model/varenr.:
Bosch 0 580 254 044
Flow: 300 LPH @ 3 Bar, 200 LPH @ 5 BarMaximum Current: 15.5 AmpsHigh Temperature Reduction: 30 LPHWeight: 1030 Grams (2.27 Pounds)Location: External In-Line PumpLength / Diameter: 196mm / 60mmInlet Threads: Female M18 x 1.5mmOutlet Threads: Female M12 x 1.5mmPositive Stud: M6 x 1mmNegative Stud: M5
...mere
Fra:
Radium
Model/varenr.:
14-0197
Inlet Fitting14-0197 Adapter Fitting, M18x1.5 to -6AN This adapter fitting is zinc-plated steel and includes a sealing crush washer.
Fra:
Radium