For use with Low-Impedence Injectors. Includes a single 1 Ohm 50W resistor mounted to a heatsink. Please contact us to ensure compatibility with your injectors.

For use with Low-Impedence Injectors. Includes set of 2 x 1 Ohm 50w resistors mounted to a heatsink. These are also sold in a single pack.  Please contact us to ensure compatibility with your injectors.

For use with low-impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you are planning on using injectors with an impedance of less than 2 ohms.  Includes set of 4 x 4.7ohm 25w resistors mounted to a heatsink. These are also sold in a set of 6. ...mere

For use with low-impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you are planning on using injectors with an impedance of less than 2 ohms.  Includes set of 6 x 4.7ohm 25w resistors mounted to a heatsink. These are also sold in a set of 4. ...mere

E-Throttle Accelerator Pedal Module Firewall mounted hanging design 16degree (~70mm) travel Redundant dual output potentiometers suitable for use with Electronic throttle bodies Includes 6 pin mating connector kit Technical Specs: See attached image. Fur ...mere

54mm Electronic Throttle Body 54mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on inlet port flange Includes mating connector kit Technical Specs: See attached image. Further details on E-Throttle setup ...mere

82mm Electronic Throttle Body 82mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on inlet port flange Includes mating connector kit Technical Specs: See attached image. Further details on E-Throttle setup ...mere

Surface mounting.Led indicator.Overload protection.Screws included. Output: lighter plug + 2 USB ports (max 15 A) • 1 USB port (max 2100 mA) • 2 USB ports (max 3000 mA)5 A) • 1 port USB (max 2 100 mA) • 2 ports USB (max 3 000 mA)

Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual knock warning tool. This kit is designed for tuning, street and race use. The G4 KnockLink is the only detonation warning device on the market that requires no setup. Other ...mere

Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or use with the G4 Knocklink Visual Warning Light.

The G4+ KnockBlock is an essential tool for tuning and can aid in the early detection of incorrect ignition timing, lean air/fuel mixtures and mechanical issues. It is used it with ear buds, headphones or noise cancelling ear muffs and features special filtering to allow you to listen in and detect ...mere

KnockLink is a self-calibrating, visual knock warning tool. The KnockLink is designed for tuning, street and race use. Will require a knock sensor to function (sold separately) or you can purchase the KnockLink Kit that includes the Knock Sensor and Loom. The G4 KnockLink is the only detonation w ...mere

This three channel igniter is suitable for electronic ignition applications.  Required when using coils that don't have inbuilt igniters. Common uses include: wasted spark on 6 cylinder engines, coil-per-plug setups on 3 cylinder engines or using multiple igniters for 6 and 8 cylinder set-ups.  ...mere