GNX4 Clear Anodize Caliper

GNX4 calipers are the product of Wilwood's in-house FEA design and 3-D modeling technology. With its unyielding strength and superior piston design, the GNX4 generates positive pedal response and high clamping efficiency with a substantial weight savings over comparable OE Calipers. Base model calipers feature a natural aluminum finish protected by a durable clear coat anodizing. Forged billet aluminum bodies, stainless steel pistons, and high-temperature seals put an end to the rust, bore pitting, and seal failures that plague many OE caliper design. Warning: Current GNX4 caliper assemblies are designed solely for use with DOT 5 fluids and should not be used with DOT 3, 4 or 5.1 fluids. GNX4 calipers can be special ordered with the correct seal composition for use with DOT 3, 4 and 5.1 fluids. Please contact Wilwood sales department for more information.

Stainless steel pistons delay the heat transfer from the pads while the aluminum calipers dissipate the heat quicker than the OE cast iron calipers. Cooler operating temperatures translate into longer service life, regardless of the driving environment. Each caliper also uses stainless SRS bridge plates to reduce wear from pad gouging at the caliper bridge. The spring-loaded action of the SRS plates also reduces noise by eliminating pad rattle and dampening the engagement harmonics.

Rotor Compatibility:

• Rotor Width(In): 1
• Maximum Rotor Width(In): 1
• Minimum Rotor Width(In): 0.88
• Maximum Rotor Diameter(In): 13.06
• Minimum Rotor Diameter(In): 11.75

Brake Pad Specifications:

• Brake Pad Type 1: 9115
• Brake Pad Type 2: N-A
• Brake Pad Type 3: N-A
• Total Pad Area (in²): 11.15
• Total Pad Volume (in³): 4.07

Piston Specifications:

• Piston 1 Bore(In): 1.88
• Piston 2 Bore(In): 1.88
• Total Piston Area (in²): 5.56

Mounting Specifications:

• Mount Type: Lug
• Mount Side: Universal
• Mount Center(In): 7
• Mount Hole Size(In): 0.45
• Mount Height(In): 2.41
• Inlet Thread Size: 1/8-27 NPT