Platinum PRO Plug-in Nissan Y61 Patrol (TB48) Kit

17.205,00 DKK  m/Moms
( 13.764,00 DKK  u/Moms )
SUITS: Nissan Y61 Patrol (TB48). Manual transmission only.
INCLUDES: Platinum PRO Direct Plug-in ECU, Plug and pins for auxiliary I/O harness. Haltech CAN adaptor cable DTM-4 female receptacle/socket to 8 pin black Tyco 3"/75mm (used to adapt a Platinum series ECU to a DTM-4 Elite CAN system), USB programming cable and USB Software Key.
NOTES: Requires a CAN IO 12 Expander Box to accept an input from a flex fuel sensor.
Model/varenr.: HT-055014
Vægt: 0,68 kg
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager

If you are after a simple plug-and-play option and your car still has its original engine and wiring in it, a Plug-in ECU is the easiest and quickest solution. You simply unplug the factory ECU, and plug the Haltech ECU directly into the factory harness. Load your base map and you're ready to go!

Features:
• Direct plug and play replacement of the OEM ECU, No rewiring necessary
• Uses the cars factory sensors
• Supports Sequential Injection (peak and hold) and Direct fire ignition
• Windows 2000, XP, Vista, Windows 7 compatible software
• Real time programming, instant hesitation free adjustment while engine is running
• Fully user definable 32 x 32 mapping
• Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
• Diagnostic Trouble Code Storing & Check Engine Light Control (Access through laptop only)
• Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
• Wideband “auto tuning” using user definable target AFR table
• USB and CAN Communication Port

Factory Outputs:
• 6 x Fuel Injector outputs
• 6 x Ignition outputs
• Tacho
• VIAS Control (Variable Intake Air Solenoid)
• Idle Control
• Thermo Fan
• N-VCT ( Nissan Variable CAM Timing Control)
• Fuel Pump EVAP Control Solenoid Valve
• AC Clutch Relay Check Engine Light

Factory Inputs:
• MAF Sensor
• Throttle Position Sensor
• Knock Detection Sensors
• Oxygen Sensors
• Coolant Temperature Sensor
• Vehicle Speed Sensor
• Power Steering Switch
• 4WD Switch Expansion I/O*:
• 2 x Analogue Voltage inputs
• 2 x Analogue Temperature inputs
• 4 x Digital pulsed output
*Optional auxiliary harness required to be purchased Haltech Part # HT040003

Functions:
• Closed Loop O2 Control (Dual Bank)
• Decel Cut
• Over Boost Rev Limiter
• Closed & Open Loop Boost Control Gear Setup
• N-VCT On - Base Tables Transient Throttle Enhance
• Knock Control
• Long Term Fuel Trim

Correction Tables: Fuel Ignition Boost:
• Cranking
• Cranking
• Air Temp Target Correction
• Air Temperature Correction
• Air Temp Duty Correction
• Coolant Temperature Correction
• Map Correction
• Zero Throttle
• Gear Correction
• Cylinder Trim
• TPS Correction
• Generic Correction 1*
• Generic Correction 2*
• Gear Correction
• Post Start
* Generic Correction tables have user definable axis

Miscellaneous:
• Data Logging: 448Kb of onboard data logging
• Storage for approx 40 minutes at 10 logs per seconds
• 6 channels of data
• Max 20 channels logging capability
• Tune can be password protected in software
• Rugged anodized aluminum casing

Physical Dimensions:
ECU Dimensions Length: 210mm (225mm with MAP nipple)
Width: 158mm Height: 42mm Weight: 690g (1.5 lb)

Applications:
• Nissan Patrol Y61 series (TB48DE engine ONLY)

Transmission:
• Manual Only (Automatic not supported)

Not Supported:
• Immobiliser

The Platinum Pro Plug-in Nissan Patrol Y61 Kit includes: Pro Plug-in ECU, USB Cable, Programming Software CD, Quick Start Guide, Instruction Manual (on CD)

Der er endnu ikke nogen anmeldelser her. Vi vil være glade for hvis du vil anmelde som den første.

Tilføj anmeldelse: