Fra: AEM

Infinity 508 PNP 99-01 Honda/Acura OBD2B Engines

2.680,00 DKK  m/Moms
( 2.144,00 DKK  u/Moms )

Plugs into the factory wiring harness on honda/acura obdii b-, d- & h-series race engines.

Model/varenr.: 30-3509 - 508
Vægt: 0,47 kg
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e)

The Infinity ECU for manual transmission equipped 1999-01 B/D/H Series Honda/Acura OBDIIb racing engines (Infinity 506 PN 30-7106 and Infinity 508 PN 30-7108) includes an engine-specific start-up calibration and connects to the engine via a Plug & Play harness that is sold separately (PN 30-3509). Begin by determining which Infinity ECU will best support the ancillary components in your manual transmission B/D/H Series OBDII engine using the Infinity Specifications Chart in the "Specs" tab.

Complete Stand Alone Engine Control
The Infinity ECU combines with the Plug & Play harness to replace the factory ECU. It controls all of the engine functions and the Plug & Play wiring harness adapter eliminates the need for cutting and splicing wires.

Plug & Play Harness with Expansion Port
AEM’s sealed, weatherproof Plug & Play harness (sold separately) includes a Lambda connector, an AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a High Performance DTM-Style 12P connector for adding common aftermarket sensors. Visit the "Features" tab for more information about the Honda B/D/H OBDII Plug & Play harness expansion port.

Featurtes:

Infinity Honda/Acura B/D/H Series OBDIIb Plug & Play Harness with Expansion Port
Once you have determined which Infinity ECU will best support your OBDIIb Honda B/D/H-Series M/T engine, you will need to purchase the OBDII B/D/H-Series Plug & Play adapter harness (PN 30-3509). AEM’s Plug & Play harness for Honda/Acura OBDII B/D/H engines includes a Wideband O2 connector, AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a High Performance DTM-Style 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, oil temperature and ethanol content sensor. The expansion port also includes a sensor ground, 5v reference, 12v power from relay and high side output for activating a relay or solenoid, a low side output for boost control and analog inputs for mode switch and no-lift shift.

Coil-On-Plug Ready Adapter Harness
The ignition coil High Performance DTM-Style connectors on Honda/Acura OBDII B/D/H adapter harnesses enables racers to easily convert their race engine to coil-on-plug without having to modify the ECU’s connector or make any changes to the jumpers in the ECU. For racers who are still running a distributed ignition, an ignition coil adapter is available that plugs into the ignition coil High Performance DTM-Style connector (PN 30-3501-00, sold separately).

The Infinity EMS delivers high-end engine control for the racing masses at a fraction of the cost. The Infinity Series 5 for Honda B/D/H OBDI race engines is even more affordable than its larger Series 7 version because it is designed for smaller racing engines using low impedance injectors up to 6 cylinders or race engines driving up to 8 high impedance injectors. It features a smaller footprint than the Infinity Series 7 (5.855” x 5.55” x 1.8”) and a single, weatherproof 80-pin connector.

200MHz Processor and Real Time Operating System
Late model vehicle ECU’s all run on faster processors. The Infinity ECU is built around a latest-generation 32 bit floating point 200MHz automotive processor and Real Time Operating System (RTOS), which is capable of processing 400 MIPS (millions of instructions per second). By comparison, common competitive systems typically use 20MHz to 50MHz processors. To our knowledge, the Infinity ECU currently has the fastest processing speed of any aftermarket Motorsports ECU available. This allows the Infinity to do more, faster, in a more stable programming environment.

  • The Infinity’s 200MHz processor and RTOS makes the Infinity more responsive, for a better driving experience
  • The Infinity’s 200MHz processor and RTOS allows for more accurate ignition timing, which enables an engine to create more power
  • The Infinity’s faster processor allows it to perform more computational features with no sacrifice in processing performance
  • The Infinity’s RTOS ensures strategic processing with optimized load balancing. This means that tuning one feature will not affect the performance of another feature
  • Airflow model based (VE) tuning
  • ECU Set Up Wizard simplifies start up
  • Flex Fuel compatible
  • Multi fuel capable
  • Drive by wire
  • Variable valve control
  • Multiple boost control strategies
  • Nitrous control
  • Map switching (on-the-fly)
  • Internal wideband UEGO air/fuel controller
  • Dual knock sensing circuits
  • Data logging up to 64 GB
  • Outputs to 3rd party dashes and loggers
  • Industry leading transfer speed
  • Integrated engine protection strategies
  • Sealed enclosure and IP67-rated comms ports

Specifications:

2-Stroke Engines

Yes

4-Stroke Engines

Yes

Cylinders

Up to 8

High Impedence Injectors (Sequential)

Up to 8

Low Impedence Injectors (Sequential)

N/A

Coils (0-5V Falling Edge)

Up to 8

Digital Inputs

Up to 6

VR/Mag Inputs

Up to 4

Analog Voltage Inputs

Up to 9

Analog Temp Inputs

Up to 3

Knock Control

2-Channel

On Board Wideband Air/Fuel Controllers

1

Drive-By-Wire

Single

H-Bridge Channels

1

High Side Outputs

1

Low Side Outputs

6

Low Side Outputs that can be PWM

6

4-Wire Stepper Motor Control

Yes

CAN Channels

2

RS232 Channels*

1

Boost Control (RPM, Time, Gear, VSS, Switch Input, Flex Fuel Content)

Yes

Variable Cam Control

Up to 2

Engine Protection**

Yes

Launch Control

Yes

Nitrous Control

Single Stage

Traction Control

Up to 2-Wheel Speed

Data Logging

Up to 64GB

Weather Resistant Sealed Electronics

Yes

Connector Pins

80

Enclosure Dimensions

5.85" x 5.55" x 1.8"

Der er endnu ikke nogen anmeldelser her. Vi vil være glade for hvis du vil anmelde som den første.

Tilføj anmeldelse:
spacer