Electric Water Pump, og controler kit. 150L/min. LCD Display

Davies Craig, elektrisk vandpumpe 150L/min.

The new lightweight alloy EWP®150 is designed for universal remote-engine fitment across a diverse range of engines. The alloy EWP®150 comes complete with AN-16 internal inlet and outlet threads for neat, tight, AN-style fitting applications. Its lightweight, compact, more powerful design is suitable for small to large plus high-performance and 4WD engines. It’s a vital performance product that fits on the bottom radiator hose, improves engine cooling management whilst releasing more horsepower, torque as well as decreasing fuel consumption. Combined with the EWP/Fan Digital Controller, the pump continues to run on after engine shut down thus eliminating ‘heat soak’ and extending engine life.

Operating voltage: 3V DC to 15V DC
Maximum current: 10A
Flow rate: 150 L/min (40 US gal/min)
Operating temp: -40 to 130C (-40 to 266F)
Pump design: clockwise centrifugal
Pump weight: 1,170 grams (2.6lbs)
Pump material: Aluminum
Burst pressure: 500 kPa (72.5 psi)
Dimensions: 128mm x 85mm x 188mm
Hose Sizes: 38mm to 51mm
Part #8070 – EWP150 Electric Water Pump with EWP/Fan Digital Controller ~ Combo Pack

LCD EWP & FAN DIGITAL CONTROLLER - 12 & 24 VOLT
Davies Craig Pty Ltd is very pleased to announce the arrival of the updated Liquid Crystal Display (LCD) EWP®/Fan Digital Controller!
 
This LCD EWP®/Fan Digital Controller (Part #8000) is Australian designed and as part of this Australian manufacturing company’s continuous improvement program this advanced Digital Controller boasts a suite of enhancements.
 
These include:
• The prominent blue Liquid Crystal Display screen (pictured)
• Now suitable for all 12v & 24v electrical systems, with relevant displays
• Genuine Thermometer, with coolant and targeted/set temp. displays
• Diagnostic check & warm-up signals
• Nine (9) targeted/set coolant temperatures, 60C (140F) to 100C (212F)
• Flashing “EWP®” logo signifying water pump in operation
• Davies Craig Thermatic® Fan logo, circulating signifying fan in operation
• Flashing High & Low Voltage indicators
• Low & High Temp indicators
• Audible alarm -
* if coolant temp doesn’t exceed 40ºC (104ºF) within 5 mins of start-up
* when coolant temperature exceeds 10ºC (50ºF) of set/target
* when coolant temperature exceeds 100ºC (212ºF)
• Above Set/Target Temperature indicator accompanies audible alarm
• Temperature Sensor short & open circuit indicators
• Automatic time-out, EWP® runs for 3 minutes or until engine temp has reduced to -10◦C (-14F) below set/targeted temp whichever occurs first.
 
The updated Davies, Craig LCD EWP®/Fan Digital Controller (#8000) as an engine management component has undergone extensive research, development, vehicle and test centre scrutiny.
 
The updated LCD Digital Controller how has two specific functions. This unique Controller will now manage the operation of the EWP® by varying the speed of the EWP® in response to the temperature of the engine and manage control of your electric engine fan. The Controller has a push-button on the facia panel that offers target temperatures, 60ºC (140°F) 65ºC (150°F) 70C (160°F) 75ºC (165°F) 80ºC (175°F) 85ºC (185°F) 90ºC (195°F) 95ºC (205°F). Generally, higher engine temperature will offer improved fuel efficiency and lower engine temperature more power. The LCD Digital Controller will now operate the engine’s electric fan automatically once the engine has reached +3c above the target temperature. A significant benefit too is the Controller allows the EWP® to run on after ignition shutdown to reduce heat soak. It is recommended that engine operational temperatures be checked with manufacturer.
 
The LCD Digital Controller can be used with our EBP however it is not recommended as it will not vary the speed of the pump in response to temperature but rather simply turn the pump on and off once the top end temperature is reached. For a far more economical & appropriate solution, we would recommend Part Number 0401 & 0444 to turn the EBP on and off at your set temp.
 
*Note: This controller (Part No. 8000) is set up for negativley earthed systems however with a wiring adjustment, can also handle positive earthed systems.