PS1000 Mazda 13B Fully Terminated Harness Kit - Includes pre-wired LS1 ignition coil harness
Model/varenr.: HT-051203

PS1000 Mazda 13B Fully Terminated Harness Kit - Includes pre-wired LS1 ignition coil harness. Suits Square Bosch EV1 injector connectors. (LS1 ignition coils are NOT included. Please order 4 x HT-020102 if required) *The fastest and most cost effective way to wire your racecar or engine conversion

Fra: Haltech
18.522,50 DKK  m/Moms
( 14.818,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
Haltech CAN Cable Black 3000mm
Model/varenr.: HT-040066

Haltech CAN Cable Black 3000mm

Fra: Haltech
450,00 DKK  m/Moms
( 360,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
Haltech CAN Cable White 3000mm
Model/varenr.: HT-040067

Haltech CAN Cable White 3000mm

Fra: Haltech
450,00 DKK  m/Moms
( 360,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
PS1000 Mazda 13B Fully Terminated Harness Kit - Includes pre-wired HPI4 15AMP 4CH Ignition Module
Model/varenr.: HT-051204

PS1000 Mazda 13B Fully Terminated Harness Kit - Includes pre-wired HPI4 15AMP 4CH Ignition Module with flying lead ignition harness. Suits Square Bosch EV1 injector connectors. (Ignition coils are NOT included. Please order 4 x HT-020110 if required) *The fastest and most cost effective way to wire your racecar or engine conversion

Fra: Haltech
20.356,25 DKK  m/Moms
( 16.285,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
Haltech CAN Cable Black 3600mm
Model/varenr.: HT-040068

Haltech CAN Cable Black 3600mm

Fra: Haltech
450,00 DKK  m/Moms
( 360,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
PS2000 Nissan RB30 Single Cam Fully Terminated Harness Kit
Model/varenr.: HT-051412

PS2000 Nissan RB30 Single Cam Fully Terminated Harness Kit - Suits Square Bosch EV1 injector connectors. Includes ECU, Engine Harness, & Fuse Block Kit. Pre-wired to connect directly to the supplied LS1 ignition coil with billet mounting bracket. Includes air & coolant temp sensors. (Can be reconfigured to run 6 indiviudal ignition coils using HT-045604) *The fastest and most cost effective way to wire your racecar or engine conversion

Fra: Haltech
23.411,25 DKK  m/Moms
( 18.729,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
Rare Earth Magnets (5mm DIA x 2mm H)
Model/varenr.: HT-010602

Rare Earth Magnets (5mm DIA x 2mm H)

Fra: Haltech
192,50 DKK  m/Moms
( 154,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
Black Dual Channel Hall Effect Sensor 1/2" UNF
Model/varenr.: HT-010604
THREAD: 1/2" UNF
SUITS: Crank/Cam.
INCLUDES: Bosch 4 Pin Junior Timer Female Connector and 4 pins.
Fra: Haltech
1.505,00 DKK  m/Moms
( 1.204,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
Plug and Pins Only - Suit S3 Black Hall Effect Sensor
Model/varenr.: HT-010605

Plug and Pins Only - Suit S3 Black Hall Effect Sensor

Fra: Haltech
107,50 DKK  m/Moms
( 86,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
Haltech CAN Cable White 3600mm
Model/varenr.: HT-040069

Haltech CAN Cable White 3600mm

Fra: Haltech
450,00 DKK  m/Moms
( 360,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
PS2000 GM GEN III LS1 & LS6 Non DBW Fully Terminated Harness Kit
Model/varenr.: HT-051455

PS2000 GM GEN III LS1 & LS6 Non DBW Fully Terminated Harness Kit Suits Square Bosch EV1 injector connectors. Includes ECU, Engine Harness, & Fuse Block Kit. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. (Ignition coils and harnesses are NOT included) *The fastest and most cost effective way to wire your racecar or engine conversion

Fra: Haltech
22.703,75 DKK  m/Moms
( 18.163,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
S4 - Grey Dual Channel Hall Effect Sensor 1/2" UNF
Model/varenr.: HT-010606
THREAD: 1/2" UNF
Fra: Haltech
1.505,00 DKK  m/Moms
( 1.204,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
Plug and Pins Only - Suit S4 Grey Hall Effect Sensor
Model/varenr.: HT-010607

Plug and Pins Only - Suit S4 Grey Hall Effect Sensor

Fra: Haltech
117,50 DKK  m/Moms
( 94,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
PS2000 GM GEN IV LS2 & LS3 Non DBW Fully Terminated EV1Harness Kit
Model/varenr.: HT-051457

PS2000 GM GEN IV LS2 & LS3 Non DBW Fully Terminated Harness Kit * Requires retrofit of cable operated throttle body - Suits Square Bosch EV1 injector connectors. Includes ECU, Engine Harness & Fuse Block Kit. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. (Ignition coils and harnesses are NOT included) *The fastest and most cost effective way to wire your racecar or engine conversion

Fra: Haltech
22.703,75 DKK  m/Moms
( 18.163,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
Honeywell GT101 Single Channel Hall Effect Sensor
Model/varenr.: HT-010608

SIZE: 18mm Diameter

Fra: Haltech
778,75 DKK  m/Moms
( 623,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
PS2000 GM GEN IV LS2 & LS3 Non DBW Fully Terminated EV6Harness Kit
Model/varenr.: HT-051459

PS2000 GM GEN IV LS2 & LS3 Non DBW Fully Terminated Harness Kit * Requires retrofit of cable operated throttle body - Suits factory EV6 injector connectors. Includes ECU, Engine Harness & Fuse Block Kit. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. (Ignition coils and harnesses are NOT included) *The fastest and most cost effective way to wire your racecar or engine conversion

Fra: Haltech
22.703,75 DKK  m/Moms
( 18.163,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
GaugeART CAN to VGA video Gauge Adapter - Suits Haltech CAN bus protocol
Model/varenr.: HT-061000

GaugeART CAN to VGA video Gauge Adapter - Suits Haltech CAN bus protocol

Fra: Haltech
6.035,00 DKK  m/Moms
( 4.828,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
PS2000 Toyota 2JZ Fully Terminated Harness Kit - Includes pre-wired HPI6 15AMP 6CH Ignition Module
Model/varenr.: HT-051462

PS2000 Toyota 2JZ Fully Terminated Harness Kit - Includes pre-wired HPI6 15AMP 6CH Ignition Module with factory coil ignition harness. Suits Square Bosch EV1 injector connectors. *The fastest and most cost effective way to wire your racecar or engine conversion

Fra: Haltech
26.980,00 DKK  m/Moms
( 21.584,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
Plug and Pins Only - Suit Dual Channel Igniter
Model/varenr.: HT-020003

Plug and Pins Only - Suit Dual Channel Igniter

Fra: Haltech
107,50 DKK  m/Moms
( 86,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
Haltech Elite DTM4 CAN Cable Black 300mm
Model/varenr.: HT-130004

Haltech Elite DTM4 CAN Cable Black 300mm

Fra: Haltech
365,00 DKK  m/Moms
( 292,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
PS2000 Toyota 2JZ Fully Terminated Harness Kit - Includes pre-wired M&W Pro-16b 6-wire CDI
Model/varenr.: HT-051464

PS2000 Toyota 2JZ Fully Terminated Harness Kit - Includes pre-wired M&W Pro-16b 6-wire CDI with factory coil ignition harness. Suits Square Bosch EV1 injector connectors. *The fastest and most cost effective way to wire your racecar or engine conversion

Fra: Haltech
33.347,50 DKK  m/Moms
( 26.678,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
Haltech Elite DTM4 CAN Cable Black 600mm
Model/varenr.: HT-130006

Haltech Elite DTM4 CAN Cable Black 600mm

Fra: Haltech
365,00 DKK  m/Moms
( 292,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
PS2000 FORD 89-95 5.0 Fully Terminated Full Sequential Harness Kit
Model/varenr.: HT-051476

PS2000 FORD 89-95 5.0 Fully Terminated Full Sequential Harness Kit - Suits Square Bosch EV1 injector connectors - Includes PS2000 ECU, Engine Harness, & Fuse Block Kit. Full Sequential Injection Pre-wired to connect directly to OEM TFI Module, Includes breakouts for Distributor or Crank Sensor Trigger (Use with OEM TFI Ignition or CDI MSD6, MSD7, Crane, Mallory etc) *The fastest and most cost effective way to wire your racecar or engine conversion

Fra: Haltech
22.703,75 DKK  m/Moms
( 18.163,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
"Red" Single Channel Hall Effect Sensor M12x1.0
Model/varenr.: HT-010610

THREAD: M12x1.0

Fra: Haltech
778,75 DKK  m/Moms
( 623,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
Stainless Steel Single Channel Hall Effect Sensor 3/8-24
Model/varenr.: HT-010612

THREAD: 3/8 24 TPI

Fra: Haltech
1.975,00 DKK  m/Moms
( 1.580,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
DRA Digital Reluctor Adaptor - inc Harness (Converts Sine wave VR sensor output to Digital signal)
Model/varenr.: HT-010613

LENGTH: 600mm (24")

Fra: Haltech
2.252,50 DKK  m/Moms
( 1.802,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
DRA - 0.6m/2ft Flying Lead Harness Only
Model/varenr.: HT-040005

DRA - 0.6m/2ft Flying Lead Harness Only

Fra: Haltech
512,50 DKK  m/Moms
( 410,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
Elite 1500 Mitsubishi 4G63 Fully Terminated Harness Kit - Suits 1G CAS, EV1, Flying lead ignition harness
Model/varenr.: HT-150930
Availability: Back Order - expected to ship within 1-2 weeks
INJECTOR CONNECTOR: Bosch EV1
SUITS: 2G CAS (Cam Angle Sensor) WBC1 CAN O2 Wideband Controller ready (Controller and sensor not included)
INCLUDES: Elite 1500 ECU with DBW and Race Functions, engine harness with fuse block, firewall grommet and pre-wired HPI4 15AMP 4CH ignition module and C.O.P. ignition harness, USB programming cable and USB Software Key.
Fra: Haltech
21.971,25 DKK  m/Moms
( 17.577,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
HPI4 - High Power Igniter - Quad Channel - Module Only
Model/varenr.: HT-020032

HPI4 - High Power 15 Amp Igniter - Quad Channel - Module Only

Fra: Haltech
2.250,00 DKK  m/Moms
( 1.800,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
Elite 1500 Mitsubishi 4G63 Fully Terminated Harness Kit - Suits 2G CAS, EV1, Flying lead ignition harness
Model/varenr.: HT-150931
Availability: Back Order - expected to ship within 1-2 weeks
INJECTOR CONNECTOR: Bosch EV1
SUITS: 2G CAS (Cam Angle Sensor) WBC1 CAN O2 Wideband Controller ready (Controller and sensor not included)
INCLUDES: Elite 1500 ECU with DBW and Race Functions, engine harness with fuse block, firewall grommet and pre-wired HPI4 15AMP 4CH ignition module and C.O.P. ignition harness, USB programming cable and USB Software Key.
Fra: Haltech
21.971,25 DKK  m/Moms
( 17.577,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
O2 Sensor Weldable Fitting Bung and Blanking Plug M18 x1.5
Model/varenr.: HT-010702
Availability: Back Order - expected to ship within 1-2 weeks
THREAD: M18 x1.5
INCLUDES: Copper washer and blanking plug.
Fra: Haltech
110,00 DKK  m/Moms
( 88,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
Elite 1500 Mitsubishi 4G63 Fully Terminated Harness Kit - Suits 1G CAS, EV1, pre-wired HPI4 and C.O.P. Ignition Harness
Model/varenr.: HT-150932
Availability: Back Order - expected to ship within 1-2 weeks
INJECTOR CONNECTOR: Bosch EV1
SUITS: 1G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors. WBC1 CAN O2 Wideband Controller ready (Controller and sensor not included)
INCLUDES: Elite 1500 ECU with DBW and Race Functions, engine harness with fuse block, firewall grommet and pre-wired HPI4 15AMP 4CH ignition module and C.O.P. ignition harness, USB programming cable and USB Software Key.
Fra: Haltech
25.272,50 DKK  m/Moms
( 20.218,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
Wideband 4.0m/12ft O2 Sensor Extension Harness (6 Pin DT connectors)
Model/varenr.: HT-010703

Wideband 4.0m/12ft O2 Sensor Extension Harness (6 Pin DT connectors)

Fra: Haltech
396,25 DKK  m/Moms
( 317,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
Wideband O2 Sensor only - Bosch LSU 4.2 (pre-terminated with 6 Pin DT connector)
Model/varenr.: HT-010714

Wideband O2 Sensor only - Bosch LSU 4.2 (pre-terminated with 6 Pin DT connector)

Availability: In stock - ready to ship
INCLUDES: Pre-terminated with female Deutsch DT-6 connector.
Fra: Haltech
1.331,25 DKK  m/Moms
( 1.065,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
Plug and Pins Only -Suit 26 Pin Flat AMP Quad Channel HPI4
Model/varenr.: HT-020033

Plug and Pins Only -Suit 26 Pin Flat AMP Quad Channel HPI4

Fra: Haltech
515,00 DKK  m/Moms
( 412,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
HPI4 - High Power Igniter - Quad Channel - inc Plug & Pins
Model/varenr.: HT-020034

HPI4 - High Power 15 Amp Igniter - Quad Channel - inc Plug & Pins

Fra: Haltech
2.626,25 DKK  m/Moms
( 2.101,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
HPI4 - High Power Igniter - Quad Channel - 2m Flying Lead Kit
Model/varenr.: HT-020035

HPI4 - High Power 15 Amp Igniter - Quad Channel - 2m Flying Lead Kit

Fra: Haltech
3.373,75 DKK  m/Moms
( 2.699,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
Elite 1500 Mitsubishi 4G63 Fully Terminated Harness Kit - Suits 2G CAS, EV1, pre-wired HPI4 and C.O.P. Ignition Harness
Model/varenr.: HT-150933
Availability: Back Order - expected to ship within 1-2 weeks
INJECTOR CONNECTOR: Bosch EV1
SUITS: 2G CAS (Cam Angle Sensor) WBC1 CAN O2 Wideband Controller ready (Controller and sensor not included)
INCLUDES: Elite 1500 ECU with DBW and Race Functions, engine harness with fuse block, firewall grommet and pre-wired Power Select 4 CDI - dual power output 115mJ/150mJ CDI and C.O.P ignition harness, USB programming cable and USB Software Key.
Fra: Haltech
25.272,50 DKK  m/Moms
( 20.218,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
Elite 1500 Mitsubishi 4G63 Fully Terminated Harness Kit - Suits 1G CAS, EV1, Power Select 4 CDI and C.O.P. Ignition Harness
Model/varenr.: HT-150934
Availability: Back Order - expected to ship within 1-2 weeks
INJECTOR CONNECTOR: Bosch EV1
SUITS: 1G CAS (Cam Angle Sensor) WBC1 CAN O2 Wideband Controller ready (Controller and sensor not included)
INCLUDES: Elite 1500 ECU with DBW and Race Functions, engine harness with fuse block, firewall grommet and pre-wired Power Select 4 CDI dual power output 115mJ/150mJ CDI and C.O.P ignition harness, USB programming cable and USB Software Key.
Fra: Haltech
32.628,75 DKK  m/Moms
( 26.103,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
Elite 1500 Mitsubishi 4G63 Fully Terminated Harness Kit - Suits 2G CAS, EV1, Power Select 4 CDI and C.O.P. Ignition Harness
Model/varenr.: HT-150935
Availability: Back Order - expected to ship within 1-2 weeks
INJECTOR CONNECTOR: Bosch EV1
SUITS: 2G CAS (Cam Angle Sensor) WBC1 CAN O2 Wideband Controller ready (Controller and sensor not included)
INCLUDES: Elite 1500 ECU with DBW and Race Functions, engine harness with fuse block, firewall grommet and pre-wired Power Select 4 CDI dual power output 115mJ/150mJ CDI and C.O.P ignition harness, USB programming cable and USB Software Key.
Fra: Haltech
32.628,75 DKK  m/Moms
( 26.103,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager