1.15 Bar MAP Sensor MAP1.15
Model/varenr.: -50505-V1
The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated engines. This MAP sensor can also be used in applications where positive intake pressures of up to 0.15 Bar (approx 2 PSI) are expected (eg. Ram-air effect). The wiring pinou ...mere
Fra: LinkECU
1.116,25 DKK  m/Moms
( 893,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
140 Bar Pressure Sensor
Model/varenr.: -50562-V1
High Pressure sensor for Liquid. Use for Fuel, Clutch, Brake etc. 140 Bar/2030PSI 45degree cone seat M10x1 Thread Includes mating connector kit Technical Specs: Up to 2030 PSI above atmospheric pressure, cannot be used to read vacuum
Fra: LinkECU
1.506,25 DKK  m/Moms
( 1.205,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
2.5 Bar MAP Sensor MAP2.5
Model/varenr.: -50504-V1
The Link 2.5 Bar MAP sensor reads up to 2.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 1.5 Bar (approx 22psi) of boost pressure. The wiring pinout for this sensor is marked directly on the sensor.   Includes 3-pin Deutsch DTM c ...mere
Fra: LinkECU
1.116,25 DKK  m/Moms
( 893,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
3 Bar MAP Sensor MAP3
Model/varenr.: -50506-V1
This Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 2.0 Bar (or 29psi) of boost pressure. The wiring pinout for this sensor is indicated on the sensor.   Includes Deutsch 3-pin connector kit E ...mere
Fra: LinkECU
1.171,25 DKK  m/Moms
( 937,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
300ZLink - #N300X
Model/varenr.: -50447-V1
Easy to install. Affordable. Reliable.   G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.   This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for ...mere
Fra: LinkECU
13.010,00 DKK  m/Moms
( 10.408,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
5 Bar MAP Sensor MAP5
Model/varenr.: -50509-V1
Details The Link 5 Bar MAP sensor reads up to 5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 4.0 Bar (or 58psi) of boost pressure.    Includes Plug and Pins Mount via weld on bund, tapped hole or remote with a barb ...mere
Fra: LinkECU
2.847,50 DKK  m/Moms
( 2.278,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
6.5 Bar MAP Sensor MAP6.5
Model/varenr.: -50508-V1
The Link 6.5 Bar MAP sensor reads up to 6.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 5.5 Bar (or 87psi) of boost pressure.  Includes Plug and Pins Mount via weld on bung, tapped hole or remote with a barb U ...mere
Fra: LinkECU
2.957,50 DKK  m/Moms
( 2.366,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
A Loom Long - #5LA
Model/varenr.: -50469-V1
5 m long 'A' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to match the manual. This loom is also available in 0.4m and 2.5m leng ...mere
Fra: LinkECU
1.842,50 DKK  m/Moms
( 1.474,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
A Loom Medium - #2LA
Model/varenr.: -50471-V1
2.5 m long 'A' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to match the manual. This loom is also available in 0.4m and 5m leng ...mere
Fra: LinkECU
1.562,50 DKK  m/Moms
( 1.250,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
A Loom short - #0LA
Model/varenr.: -50473-V1
0.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to match the manual. This loom is also available in 2.5m and ...mere
Fra: LinkECU
781,25 DKK  m/Moms
( 625,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
AIM GPS-08 Module for AIM Dashes
Model/varenr.: -50539-V1
Add-on GPS module for the MXS and MXG Strada Dashes. 1.3m cable length. Features:   Sample lap and split times as well as speed, position and acceleration - all the information needed for engine tuning as well as for improving your driving technique.  Supports more than 2000 tra ...mere
Fra: LinkECU
2.791,25 DKK  m/Moms
( 2.233,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Air Temp Sensor IAT1-8
Model/varenr.: -50517-V1
Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" BSP Thread
Fra: LinkECU
736,25 DKK  m/Moms
( 589,00 DKK  u/Moms )
Lager: På lager På lager
Air Temperature Sensor IATB
Model/varenr.: -50514-V1
Includes Plug Kit - 2 way Bosch Style plug, terminals and boot Aluminium and steel weld in mounting bosses available (IATBMA & IATBMS)
Fra: LinkECU
736,25 DKK  m/Moms
( 589,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
AltezzaLink - TALTX
Model/varenr.: -50466-V1
Easy to install. Affordable. Reliable.   G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.   This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for ...mere
Fra: LinkECU
13.010,00 DKK  m/Moms
( 10.408,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
B Loom Long - #5LB
Model/varenr.: -50468-V1
5 m long 'B' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to match the manual. This loom is also available in 0.4m and 2.5m leng ...mere
Fra: LinkECU
1.842,50 DKK  m/Moms
( 1.474,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
B Loom Medium - #2LB
Model/varenr.: -50470-V1
2.5 m long 'B' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to match the manual. This loom is also available in 0.4m and 5m leng ...mere
Fra: LinkECU
1.562,50 DKK  m/Moms
( 1.250,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
B Loom Short - #0LB
Model/varenr.: -50472-V1
0.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to match the manual. This loom is also available in 2.5m and ...mere
Fra: LinkECU
781,25 DKK  m/Moms
( 625,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
B100G4 - 100 pack blanking plugs
Model/varenr.: -50495-V1
Blanking plugs for unused terminal positions - 100 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.
Fra: LinkECU
380,00 DKK  m/Moms
( 304,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Ballast Resister BAL
Model/varenr.: -50534-V1
For use with Low-Impedence Injectors. Includes a single 1 Ohm 50W resistor mounted to a heatsink. Please contact us to ensure compatibility with your injectors.
Fra: LinkECU
950,00 DKK  m/Moms
( 760,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Ballast Resistor BAL2
Model/varenr.: -50533-V1
For use with Low-Impedence Injectors. Includes set of 2 x 1 Ohm 50w resistors mounted to a heatsink. These are also sold in a single pack.  Please contact us to ensure compatibility with your injectors.
Fra: LinkECU
1.060,00 DKK  m/Moms
( 848,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Ballast Resistor BAL4
Model/varenr.: -50532-V1
For use with low-impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you are planning on using injectors with an impedance of less than 2 ohms.  Includes set of 4 x 4.7ohm 25w resistors mounted to a heatsink. These are also sold in a set of 6. ...mere
Fra: LinkECU
1.228,75 DKK  m/Moms
( 983,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Ballast Resistor BAL6
Model/varenr.: -50531-V1
For use with low-impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you are planning on using injectors with an impedance of less than 2 ohms.  Includes set of 6 x 4.7ohm 25w resistors mounted to a heatsink. These are also sold in a set of 4. ...mere
Fra: LinkECU
1.452,50 DKK  m/Moms
( 1.162,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
BG4 - 20 pack blanking plugs
Model/varenr.: -50496-V1
Blanking plugs for unused terminal positions - 20 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors
Fra: LinkECU
122,50 DKK  m/Moms
( 98,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
BMWLink - E36X
Model/varenr.: -50435-V1
Easy to install. Affordable. Reliable.   G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.   This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for ...mere
Fra: LinkECU
11.675,00 DKK  m/Moms
( 9.340,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Boost Control Solenoid - 3 Port
Model/varenr.: -50536-V1
Details More boost? Of course and this 3 port boost control solenoid will help you do it.  3 port boost control solenoids are the go-to for the majority of boost control applications, they allow for precise control of boost and boost levels can be raised to around 2-3 times the spring pressure o ...mere
Fra: LinkECU
1.283,75 DKK  m/Moms
( 1.027,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Boost Control Solenoid - 4 Port
Model/varenr.: -50535-V1
Thinking of turning up the boost to max? Then this 4 port boost control solenoid is perfect. It allows for precise boost control of up to 120PSI. 4 port Boost control soldenoids are commonly used for big boost applications, boost levels can be raised as high as 6-7 times the spring pressure of th ...mere
Fra: LinkECU
1.618,75 DKK  m/Moms
( 1.295,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Bosch 2 Way Plug Kit - #PKB2
Model/varenr.: -50494-V1
Bosch 2 way plug kit. Useful for a variety of applications. Most commonly paired with Bosch Fuel Injectors. Includes 2 way Bosch Style Plug, pins and rubber boot
Fra: LinkECU
122,50 DKK  m/Moms
( 98,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Bosch 3 Way Plug Kit - #PKB3
Model/varenr.: -50492-V1
Bosch 3 Way Plug Kit
Fra: LinkECU
111,25 DKK  m/Moms
( 89,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Bosch 7 Way Plug Kit - #PKB7
Model/varenr.: -50493-V1
7 way Bosch Style Plug, pin and Boot
Fra: LinkECU
122,50 DKK  m/Moms
( 98,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Cable CANDASH
Model/varenr.: -50479-V1
Link CAN Connector to flying leads. Can be used for custom applications – Please contact our tech support to check compatibility/suitability.
Fra: LinkECU
613,75 DKK  m/Moms
( 491,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Cable CANPCB
Model/varenr.: -50477-V1
Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separately) to connect.
Fra: LinkECU
335,00 DKK  m/Moms
( 268,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Cable USBM
Model/varenr.: -50475-V1
USB Mini Cable. Used to connect ECU to computer for tuning.  Suitable for: G4X Atom G4X Monsoon G4+ Atom G4+ Kurofune G4+ Monsoon
Fra: LinkECU
246,25 DKK  m/Moms
( 197,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
CAN Lambda
Model/varenr.: -50528-V1
Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs. 
The CAN-Lambda’s ability to measure the proportion of oxygen in exhaust gases makes it an essential tool for accurately tuning fuel mixtures as well allowing your ECU to make tuning adjustments 
on the fly. 

Being fully digital the CAN Lambda’s powerful LSU 4.9 sensor will eliminate any loss of signal, risk, delays and errors that analogue alternatives cause. The CAN-Lambda never requires free air calibration. 

Box Contents

  • CAN-Lambda device
  • Bosch LSU4.9 Sensor
  • Deutsch 4-Way Connector Kit
  • O2 Bung and Plug
  • 2 Large Stickers
  • 2 Small Stickers
  • Quick Start Quide
If using the CAN Lambda with a G4+/G4X PlugIn ECU use a Link CANPCB cable to access the CAN port on the PlugIn PCB and a Link CANF field insertable CAN plug.
Fra: LinkECU
3.683,75 DKK  m/Moms
( 2.947,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
CIVICLink - #HC92X
Model/varenr.: -50436-V1
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.   This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.  Designed for t ...mere
Fra: LinkECU
9.826,25 DKK  m/Moms
( 7.861,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
CIVICLink - #HC96X
Model/varenr.: -50437-V1
Easy to install. Affordable. Reliable.   G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.   This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for ...mere
Fra: LinkECU
9.826,25 DKK  m/Moms
( 7.861,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
CIVICLink - #HC96X
Model/varenr.: -50438-V1
Easy to install. Affordable. Reliable.   G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.   This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for ...mere
Fra: LinkECU
9.826,25 DKK  m/Moms
( 7.861,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Combined Pressure and Temperature Sensor
Model/varenr.: -50563-V1
Two sensors in one - Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg C L Liquid Temperature sensor. Suitable for Oil, Coolant, Fuel, Transmission fluid etc. Up to 10.0 bar (145PSI/1000kpa) Pressure Sensor for Liquid -40 to 140°C (-40 to 284°F) Temperature sensor for Liquid ...mere
Fra: LinkECU
1.282,50 DKK  m/Moms
( 1.026,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Coolant Temperature Sensor NTC1-8
Model/varenr.: -50513-V1
Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" BSP Thread
Fra: LinkECU
535,00 DKK  m/Moms
( 428,00 DKK  u/Moms )
Lager: På lager På lager
Coolant Temperature Sensor NTC12
Model/varenr.: -50511-V1
Includes Plug Kit - 2 way Bosch Style plug, terminals and boot M12 Thread
Fra: LinkECU
535,00 DKK  m/Moms
( 428,00 DKK  u/Moms )
Lager: På lager På lager
Crank Angle Sensor CAS
Model/varenr.: -50524-V1
Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with almost any steel trigger wheel, see related products for our trigger wheel options. Features   Variable reluctance (reluctor) sensor Includes Plug Kit - 2 ...mere
Fra: LinkECU
1.340,00 DKK  m/Moms
( 1.072,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager