PHR - Dynosaur Performance Fuel Rail Kit for Gen 2 Dodge Viper
Model/varenr.: 8475240411
Dynosaur Performance is happy to bring you the best fuel rail kit for the Gen 2 Dodge Viper on the market. Save yourself from poorly designed alternatives. Get what works best at ANY horsepower level. The Dynosaur Performance Fuel Rail Kit starts with solid 6061 aluminum which is extruded through ...mere
Fra: POWERHOUSERACING
3.726,25 DKK  m/Moms
( 2.981,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
PHR -20AN Coolant Port Adapter for 2JZ-GE
Model/varenr.: 847523811
The PHR -20AN Coolant Port Adapter for the 2JZ-GE allows you to connect a -20AN line to the head in order to run a -20 Upper Radiator Hose. These replace the factory cast waterneck.  Machined from billet aluminum and made to keep as low a profile as possible in order to clear the power steering r ...mere
Fra: POWERHOUSERACING
1.471,25 DKK  m/Moms
( 1.177,00 DKK  u/Moms )
Lager: På lager På lager
PHR 1/8 BSPT to 1/8 NPT Metric to Standard Adapter
Model/varenr.: 00001245
Use this adapter to convert your 1/8 Metric Pipe Thread fittings to 1/8 NPT fittings. Perfect for using existing ports to install sensors and oil feeds for turbos.Machined from 316 stainless Steel
Fra: POWERHOUSERACING
267,50 DKK  m/Moms
( 214,00 DKK  u/Moms )
Lager: På lager På lager
PHR 2JZ Oil Galley Plug
Model/varenr.: 8475237281556
When sending a 2JZ block to the machine shop you must remove the four oil galley plugs to ensure the all metal shaving and contaminants are able to be cleaned out of the oil passages. Upon removal most of these are no longer usable. These are a perfect press fit replacement for the 2JZ engine block. ...mere
Fra: POWERHOUSERACING
100,00 DKK  m/Moms
( 80,00 DKK  u/Moms )
Lager: På lager På lager
PHR 3/8 BSPT Plug, 3/8 Metric Pipe Plug, Plug for coolant port that normally goes to oil cooler
Model/varenr.: 8475240418
This plug is used to plug the coolant port on the block of the 2JZ Engine that normally goes to the oil cooler. Use this plug when deleting your oil cooler or going to an aftermarket oil cooler.90344-53015
Fra: POWERHOUSERACING
156,25 DKK  m/Moms
( 125,00 DKK  u/Moms )
Lager: På lager På lager
PHR Adjustment Lock Kit for PHR Cam Gears
Model/varenr.: 01011048.A

PHR Adjustment Lock Kit for PHR Cam Gears. This is the the locks only. No Gears.

Fra: POWERHOUSERACING
492,50 DKK  m/Moms
( 394,00 DKK  u/Moms )
Lager: På lager På lager
PHR Air Inlet Plate for 1993-98 Supra
Model/varenr.: 630213
This high quality aluminum plate fits over the top of the front mount intercooler and diverts all incoming air through the intercooler and radiator first instead of pushing it over the top. Not to mention it makes a show statement when the hood is open! The perfect final touch for any modified Supra ...mere
Fra: POWERHOUSERACING
1.380,00 DKK  m/Moms
( 1.104,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
PHR Billet 2JZ Power Steering Pump Fitting
Model/varenr.: 7020
During the design process of our power steering reservoir kit we decided it was time to innovate a new product. Instead of the re-welded and re-worked inlet fittings everyone is use to seeing we opted to create a billet replacement fitting. This is a direct fit and uses a -10 hose end.
Fra: POWERHOUSERACING
518,75 DKK  m/Moms
( 415,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
PHR Billet Adjustable Locking Cam Gear for 2JZ/1JZ
Model/varenr.: PHR 01011048

Price is per gear.

Fra: POWERHOUSERACING
Pris fra
1.912,50 DKK  m/Moms
( 1.530,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
PHR Billet Coil Cover (spark plug cover) for 2jzgte VVT-i
Model/varenr.: 8475240427
Powerhouse Racing is glad to present our Billet Coil Cover for the 2JZ-GTE VVT-i motor.This solid billet aluminum coil cover is fully CNC machined from solid billet aluminum. Allows for extra heat removal via the larger vent ports as well as giving a show quality look. We think the PHR Coil Covers ...mere
Fra: POWERHOUSERACING
3.133,75 DKK  m/Moms
( 2.507,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
PHR Billet Valve Covers for 2JZ, Non-VVT-i With Coil Cover (Machined Finish)
Model/varenr.: 8475240429
Powerhouse Racing Billet Valve Covers are precision machined from solid 6061 billet and retain OEM fitment.Designed for street cars all the way to full blown race cars. Multiple breather options/locations are available for standard breather tanks to dry sump engines running; pop-off valves, vacuum r ...mere
Fra: POWERHOUSERACING
Pris fra
17.976,25 DKK  m/Moms
( 14.381,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
PHR Boost Solenoid Bracket
Model/varenr.: 847523621
PHR tilbyder nu en super clean løsning til montering af din AEM boost controller! Med dette beslag, gør det det nemt at montere din boost controller på en nem og lækker måde. Beslaget er skåret ud i billet aluminium og kommer med diverse hardware til installation. 
Fra: POWERHOUSERACING
402,50 DKK  m/Moms
( 322,00 DKK  u/Moms )
Lager: På lager På lager
PHR Breather Oil Cap for 2JZ with -10 ORB Port
Model/varenr.: 8475237281713
2JZ and big boost means you must have a proper breather setup to handle the excessive crankcase pressures. This oil cap give and easy twist-on solution to add a 10 or 12AN breather port to you valve covers. CNC'd aluminum and anodized black. This cap will clear factory hood and fit on any OEM or ...mere
Fra: POWERHOUSERACING
1.365,00 DKK  m/Moms
( 1.092,00 DKK  u/Moms )
Lager: På lager På lager
PHR Cam Gear Bolt with Billet Stainless Washer for 2JZ
Model/varenr.: 847523544
The PHR Cam Gear Bolt with Stainless Washer is the perfect finish to your engine bay. Why have a beautiful set of cam gears and ruin the look with ugly factory bolts. The PHR Cam Gear Bolt Features a tapered washer which protrudes around the bolt to give a fantastic look and clean finish. Our bolt i ...mere
Fra: POWERHOUSERACING
Pris fra
315,00 DKK  m/Moms
( 252,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
PHR Fuel Pressure Pulsation Dampener Bypass line for 1993-98 Supra
Model/varenr.: 100

A must-have for all BPU Supras, the PHR Bypass consists of a large #6 Stainless Steel Braided hose with metric fittings to route from the factory fuel filter to the rear of the factory fuel rail.

Fra: POWERHOUSERACING
Pris fra
1.008,75 DKK  m/Moms
( 807,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
PHR Gen 2 Flex Fuel Sensor Bracket for 1993-1998 Toyota Supra
Model/varenr.: 8475237281549
The Powerhouse Racing Gen 2 Flex Fuel Bracket for the 1993-1998 Toyota Supra mounts the flex fuel sensor under the car in the OEM fuel filter location. You can't use this bracket with the factory fuel line (but if you are running flex fuel, you should not be utilizing the factory fuel line anyway) ...mere
Fra: POWERHOUSERACING
1.491,25 DKK  m/Moms
( 1.193,00 DKK  u/Moms )
Lager: På lager På lager
PHR IS300 Fan Kit for 1993-98 Supra
Model/varenr.: 87

FREE UP HORSEPOWER AND DRAMATICALLY IMPROVE YOUR COOLING!

Anyone building a high horsepower/high boost 2JZGTE engine has to consider the effects of cooling.The OEM fan is superior and cools better than most electric fan kits on the market but causes an untidy mess in the engine bay and doesn't look so "pretty". We have took the good of both worlds and created a fan kit that not only OUT FLOWS OEM but it really is OEM just from a IS300. 

Fra: POWERHOUSERACING
4.575,00 DKK  m/Moms
( 3.660,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
PHR Oil Filter Union
Model/varenr.: PHR Oil Filter Union
The Powerhouse Racing Oil Filter Union is the best way to eliminate your oil cooler and/or oil filter housing on your 2jz or 1jz engine. Simply remove the old filter housing and thread the fitting into the block. Oil Filter attaches directly onto the union.
Fra: POWERHOUSERACING
600,00 DKK  m/Moms
( 480,00 DKK  u/Moms )
Lager: På lager På lager
PHR One Piece Billet Timing Belt Drive Gear for 2JZ-GTE 12 tooth pickup wheel
Model/varenr.: 8475237281712
Powerhouse Racing has always been on the top of the world in creating solutions to common problems that occur with the 2jz engine. One common issue is the timing pickup will often separate from the main timing belt gear and spin causing a trigger/sync error. This will cause running and timing pro ...mere
Fra: POWERHOUSERACING
1.285,00 DKK  m/Moms
( 1.028,00 DKK  u/Moms )
Lager: På lager På lager
PHR One Piece Billet Timing Belt Drive Gear for 2JZ-GTE 36-2 tooth pickup wheel
Model/varenr.: 84752372819017
The Powerhouse Racing One Piece Billet Timing Belt Drive Gear for the VVT-i 2JZ-GTE features a one-piece design and is CNC machined from billet steel. This timing gear features lightening holes on both the front and rear of the gear to keep it as light as possible, and the steel material makes for ...mere
Fra: POWERHOUSERACING
1.258,75 DKK  m/Moms
( 1.007,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
PHR Short Stud and Nut Kit for Turbo Manifolds
Model/varenr.: 8475237281554
The PHR Short Stud and Nut Kit uses shorter studs than the factory twin turbo studs and the nuts are flanged with a smaller diameter flange. These are often used where clearance for manifold runners are very tight. Each Kit Includes: (12) M10x1.25 studs (12) M10x1.25 ...mere
Fra: POWERHOUSERACING
765,00 DKK  m/Moms
( 612,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
PHR Solid Front Differential Mounts Earmounts
Model/varenr.: 8475237281679
Powerhouse Racing Solid Front Differential Mounts (Ear Mounts). Sold by the pair. Firm up your rear end, to be able to handle massive horsepower, reduce ET's and 60ft times.  Don't waste energy shaking that differential around. Transfer that power to through the diff, to the axles and to the whee ...mere
Fra: POWERHOUSERACING
1.778,75 DKK  m/Moms
( 1.423,00 DKK  u/Moms )
Lager: På lager På lager
PHR Solid Rear Subframe Mounts
Model/varenr.: 5631
Powerhouse Racing Billet Rear Differential Mounts. These are the 2 differential mounts that go from the subframe to the differential assembly. These parts are sold as a pair, no welding required! Firm up your rear end, to be able to handle massive horsepower, reduce ET's and 60ft times. Don't waste ...mere
Fra: POWERHOUSERACING
1.861,25 DKK  m/Moms
( 1.489,00 DKK  u/Moms )
Lager: På lager På lager
PHR Solid Rear Subframe Mounts REAR
Model/varenr.: 8475237281680
Powerhouse Racing Solid Rear Subframe Mounts (rear of rear subframe). Sold by the pair. keep that rear end in place and keep it healthy for BIG horsepower. Get your 60ft's down and don't break. Not only does your diff want to move around, the entire subframe wants to rock too. The factory bushing ...mere
Fra: POWERHOUSERACING
2.972,50 DKK  m/Moms
( 2.378,00 DKK  u/Moms )
Lager: På lager På lager
PHR Solid Steering Rack Bushing Kit for Toyota Supra
Model/varenr.: 8475237281717
The Powerhouse Racing Solid Steering Rack Bushing Kit is a compound solution to the shortcomings of the factory power steering rack bushings: The factory rubber bushings a prone to oil saturation, sponging and failure, resulting in poor steering response or an outright dangerous condition of tota ...mere
Fra: POWERHOUSERACING
1.531,25 DKK  m/Moms
( 1.225,00 DKK  u/Moms )
Lager: På lager På lager
PHR Timing belt Tensioner Bracket
Model/varenr.: 630247
The OEM timing belt tensioner brackets are prone to cracking and breakage in high RPM/high HP applications. PHR is happy to provide you with hands down the best replacement available:  Fully CNC machined from billet steel making it the strongest bracket on the market  Black oxide coated to provi ...mere
Fra: POWERHOUSERACING
Pris fra
2.016,25 DKK  m/Moms
( 1.613,00 DKK  u/Moms )
Lager: På lager På lager
PHR VVT-i Oil Feed Adapter for 2JZ
Model/varenr.: 847523772
If you have an early generation 2JZ block, before the availablility of VVT-i, this fitting adapts your oil pressure switch port to a VVT-i Oil Feed Port. You need this fitting if converting to a VVT-i cylinder head on the early generation blocks.  Retains factory checked banjo bolt which is neces ...mere
Fra: POWERHOUSERACING
472,50 DKK  m/Moms
( 378,00 DKK  u/Moms )
Lager: På lager På lager