PHR IS300 Fan Kit for 1993-98 Supra
FREE UP HORSEPOWER AND DRAMATICALLY IMPROVE YOUR COOLING!
Anyone building a high horsepower/high boost 2JZGTE engine has to consider the effects of cooling.The OEM fan is superior and cools better than most electric fan kits on the market but causes an untidy mess in the engine bay and doesn't look so "pretty". We have took the good of both worlds and created a fan kit that not only OUT FLOWS OEM but it really is OEM just from a IS300.
PHR is constantly striving to improve the Toyota Supra platform. And on a highly-modified Supra, heat is a problem. With HUGE front mount intercoolers, high idle speeds, heat drenching turbos and high performance motors all saddled with a hot A/C condenser, maintaining reasonable engine temperature is a real problem. Upgraded radiators and fan setups are installed to help to address this problem, but sometimes they still come up short. Airflow must be improved to remove the heat from the motor.
To address these problems, PHR is happy to introduce the IS300 Fan Shrould for the 1993-1998 Supra.
Our IS300 Fan Shrould allows you to replace the OEM clutch fan with a pair of 2001-2005 IS300 (or 1998-2005 GS300) electric fans. Lexus OEM Fans are some of the best, proving to outlive any GS300 or IS300 we have come across! A pair of used GS300 or IS300 fans will not only outflow the OEM clutch fan but can also be acquired for next to nothing - making this option a no brainer when compared to other electric fan kits on the market!
At high vehicle speeds as airflow increases to the front of the car, if high pressure is built in front of the fans, bypass flaps open to allow even more airflow through the radiator, furthering cooling even more.
Not only do IS300 electric fans improve cooling, they also free up sacrificial horsepower that the Supra's factory clutch fan soaks up. This also greatly improves the longevity and reliability of the water pump. On high revving 2JZ engine builds, we have even seen the factory clutch fan spin the shaft completely out of the waterpump causing catastrophic failure. Don't be a victim. Be proactive.
Installation is simple when paired with our PNP PHR Dual Fan Harness for 1993-1998 Supra
PLEASE NOTE: WE CANNOT GUARANTEE COLD SIDE PIPING FITMENT WHEN USING THE OEM 2JZ-GTE INTAKE MANIFOLD (DROP DOWN STYLE) ROUTING. PLEASE CONTACT US IF YOU ARE INTERESTED IN HAVING PHR CUSTOM COLD SIDE PIPING BUILT FOR YOUR APPLICATION.
Please note: you are purchasing the shroud only and the following items are still required:
(2) GS300 or IS300 OEM Fan Blades
(2) GS300 or IS300 OEM Fan Motors
(2) GS300 or IS300 Fan Motor Pig Tails
Der er endnu ikke nogen anmeldelser her. Vi vil være glade for hvis du vil anmelde som den første.
