PTFE Hose Assemblies 8AN - 72.0 - 120S - ST

Radium Engineering does NOT produce custom hose sizes/configurations that are not shown on this page. Radium does NOT sell bulk hose or PTFE hose-ends.

PTFE is the ultimate hose material. It has outstanding resistance to chemicals including alcohol fuels such as methanol, ethanol, E85 and leaded fuels such as race gas. PTFE hose has ~zero~ permeation and will not emit vapors like rubber fuel hose, so it is safe to use in confined spaces such as a vehicle’s trunk. These PTFE hoses area also rated for high pressure use (1000+psi).

These pre-fabricated -6AN (3/8" ID), -8AN (1/2" ID) and -10AN (5/8" ID) hoses are offered in various lengths and hose end fittings. They feature an extruded PTFE (fluoropolymer) core wrapped in a stainless steel wire braided sleeve and finished with a black anti-abrasion outer cover made from PVC. Rated for use in extreme temperature environments (-65F to +450F).

The hose ends are anodized aluminum and are either crimped-on or removable, depending on the hose configuration selected. They are shipped pre-assembled and are ready for immediate installation. Hoses with angled fittings on each end incorporate a swivel on one fitting.

How to choose the hose part number:

Example: 6AN - 14.9 - 180S - 90

6AN = 3/8" ID hose and 9/16-18 threaded female fittings
14.9 = Total length (inches) including hose ends
180 = 1st hose end (90deg, 45deg, 180deg or ST=straight)
S = 1st hose end (Swivel)
90 = 2nd hose end (90deg, 45deg, 180deg or ST=straight)