Model/varenr.: 1371875121

HEAD GASKET 2JZ-GTE 87.5-1.5mm

Fra: Tomei
2.487,50 DKK  m/Moms
( 1.990,00 DKK  u/Moms )
Lager: På lager På lager
Model/varenr.: 90311-46001
New Front Main Seal is a must for replacing the Oil Pump, This item is NOT included when buying a new Oil Pump or PHR Modified Oil Pump unless added to the order. This is one cheap seal that is hard to overlook. Another similar item sold when doing the front main seal is the Rear Main Seal.
Fra: OEM
255,00 DKK  m/Moms
( 204,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Model/varenr.: BC8230
BC gaskets are made in Japan and deliver the ultimate sealing capability even at extreme boost pressures. Individual die cut layers of stainless steel with superior consistency compared to other leading gaskets. These inferior brands are constructed with too high profile of beads which is prone to f ...mere
1.917,50 DKK  m/Moms
( 1.534,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Model/varenr.: -35692

Toyota complete engine gasket/seal kit for the Toyota Supra 2JZ-GTE engine, pre-vvti and VVTi.

Comes with head gasket, valve stem seals, cam cover seals, camshaft seals, cam cover bolt washers, front and rear crankshaft seal, manifold gaskets, etc.

4.060,00 DKK  m/Moms
( 3.248,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
Model/varenr.: AR8637
Head StudsARP uses premium grade 8740 alloy that is heat treated to 200,000 p.s.i. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best. Following heat treat, ea ...mere
6.502,50 DKK  m/Moms
( 5.202,00 DKK  u/Moms )
Lager: Leveringstid er 1-2 uger, hvis udsolgt. dag(e) Ikke på lager
Model/varenr.: 22004-AT003
  Highly durable and lightweight pulley Using a super light duralumin (A2014) as its main material that the strength has increased by 50% and hardness by 30% (over previous version). This change in material has allowed the design change that has also allowed the unit to be substantially lighter (1 ...mere
Fra: HKS
1.362,50 DKK  m/Moms
( 1.090,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Model/varenr.: 22002-AT004
HKS Camshafts (22002-AT004) Camshaft, Valve Timing Controller Required Duration : 264 Deg, Position: Intake, Valve Lift: 8.6mm, Valve Timing: 94 Deg~118 Deg The Pursuit of Maximum Camshaft Efficiency The concept behind the HKS camshafts was to produce something that the customers would be truly ha ...mere
Fra: HKS
5.216,25 DKK  m/Moms
( 4.173,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Model/varenr.: 22002-AT002
The Pursuit of Maximum Camshaft Efficiency The concept behind the HKS camshafts was to produce something that the customers would be truly happy with. This sounds simple on the surface but this is something very challenging. When the development team looked carefully at the details, the ultimate co ...mere
Fra: HKS
4.387,50 DKK  m/Moms
( 3.510,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Model/varenr.: 22002-AT001
This is a new product of wide duration of 280° for highly trusted and high power HKS camshaft 2JZ-GTE. Feature With its high power performance at a high RPM, it will beat other competitors in the drag race. HKS has tested it at both Japan and USA drag race such as NHRA Drag, etc. This is factor ...mere
Fra: HKS
4.387,50 DKK  m/Moms
( 3.510,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Model/varenr.: 2202-RT084
HKS Camshafts (2202-RT084) Camshaft Duration : 264 Deg, Position: Exhaust, Valve Lift: 9mm, Valve Timing: 115 Deg The Pursuit of Maximum Camshaft Efficiency The concept behind the HKS camshafts was to produce something that the customers would be truly happy with. This sounds simple on the surface ...mere
Fra: HKS
4.410,00 DKK  m/Moms
( 3.528,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Model/varenr.: 2202-RT086
HKS Camshafts (2202-RT086) Camshaft Duration : 272 Deg, Position: Exhaust, Valve Lift: 9.3mm, Valve Timing: 115 Deg The Pursuit of Maximum Camshaft Efficiency The concept behind the HKS camshafts was to produce something that the customers would be truly happy with. This sounds simple on the surfa ...mere
Fra: HKS
4.411,25 DKK  m/Moms
( 3.529,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Model/varenr.: 2202-RT083
The Pursuit of Maximum Camshaft Efficiency The concept behind the HKS camshafts was to produce something that the customers would be truly happy with. This sounds simple on the surface but this is something very challenging. When the development team looked carefully at the details, the ultimate co ...mere
Fra: HKS
4.406,25 DKK  m/Moms
( 3.525,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e) Ikke på lager
Model/varenr.: 2301-RT041
The Performance requirement from Head Gasket. As the cylinder block and head are not rigid body, when the Head Bolts are tightened, the gap between the surfaces and the surface pressure applied is not even across the whole surface. Moreover, due to combustion pressure and vibration while driving, t ...mere
Fra: HKS
2.976,25 DKK  m/Moms
( 2.381,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e) Ikke på lager
Model/varenr.: 2202-RT085
The Pursuit of Maximum Camshaft Efficiency The concept behind the HKS camshafts was to produce something that the customers would be truly happy with. This sounds simple on the surface but this is something very challenging. When the development team looked carefully at the details, the ultimate co ...mere
Fra: HKS
4.405,00 DKK  m/Moms
( 3.524,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e) Ikke på lager
Model/varenr.: 2301-RT042
HKS Metal Head Gaskets (2301-RT042) Metal Head Gasket, Stopper Type Bore : 88mm, Comp Ratio: 8.21:1, Thickness: 1.6mm The Performance requirement from Head Gasket. As the cylinder block and head are not rigid body, when the Head Bolts are tightened, the gap between the surfaces and the surface pre ...mere
Fra: HKS
3.215,00 DKK  m/Moms
( 2.572,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e) Ikke på lager
Model/varenr.: 2301-RT043
HKS Metal Head Gaskets (2301-RT043) Metal Head Gasket, Stopper Type Bore : 88mm, Comp Ratio: 7.97:1, Thickness: 2mm The Performance requirement from Head Gasket. As the cylinder block and head are not rigid body, when the Head Bolts are tightened, the gap between the surfaces and the surface press ...mere
Fra: HKS
3.333,75 DKK  m/Moms
( 2.667,00 DKK  u/Moms )
Lager: Leveringstid er Skaffevare - leveringstid 1-2 uger,. dag(e) Ikke på lager
Model/varenr.: 04111-46094
When purchasing a new engine or just refreshing the old engine in place. This Genuine OEM Toyota kit is exactly what you need! This kit replaces virtually every gasket and seal on your entire longblock (both the shortblock and head). It is significantly cheaper than buying each piece separately. T ...mere
Fra: OEM
4.793,75 DKK  m/Moms
( 3.835,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Model/varenr.: 1371875181

HEAD GASKET 2JZ-GTE 87.5-1.8mm

Fra: Tomei
2.487,50 DKK  m/Moms
( 1.990,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Model/varenr.: 1371875201

HEAD GASKET 2JZ-GTE 87.5-2.0mm

Fra: Tomei
2.926,25 DKK  m/Moms
( 2.341,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Model/varenr.: 11115-46052

Original 2JZ-GTE toppakning.

Fra: OEM
2.061,25 DKK  m/Moms
( 1.649,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Model/varenr.: -47470-V1

GSC Power-Division S2 cams for the Toyota Supra 2JZ-GTE. The S2 cams are designed for those running a large single turbo, larger than 71mm. These cams will not have bottom end losses over our S1 cams; nothing but gains will be seen and will promote great peak power gains.

12.418,75 DKK  m/Moms
( 9.935,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Model/varenr.: 17177-46031
Original OEM Toyota indsugningspakning til Toyota 2JZ GTE motor. Det er den som sidder tættest på motor.
Fra: OEM
186,25 DKK  m/Moms
( 149,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Model/varenr.: 630311
Pakdåse til Toyota
Fra: OEM
450,00 DKK  m/Moms
( 360,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Model/varenr.: 90311-40014
Cam shaft seal for all 2JZ engines. This contains 1 seal. This is an aftermarket replacement part. 
Fra: JOCKS
80,00 DKK  m/Moms
( 64,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Model/varenr.: 04111-46056
When purchasing a new engine or just refreshing the old engine in place. This Genuine OEM Toyota kit is exactly what you need! This kit replaces virtually every gasket and seal on your entire longblock (both the shortblock and head). It is significantly cheaper than buying each piece separately. Thi ...mere
Fra: OEM
4.793,75 DKK  m/Moms
( 3.835,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Model/varenr.: 04111-46045
Toyota art no: 04111-46045 Indeholder alle pakninger, o-ringe, pakdåser, og andre ting du behøver til motorrenovering af 2JZ-GE ToppakningUdstødningspakningIndsugningspakningPakdåse krumtap og knasterOlietyveO-ringeVentildækselpakningog mere. 
Fra: OEM
3.750,00 DKK  m/Moms
( 3.000,00 DKK  u/Moms )
Lager: På lager På lager
Model/varenr.: 90311-40020
OEM camshaft seal for 2JZGTE/ 2JZGE / 2JZGTE VVT-i  and 1JZGTE / 1JZGE / 1JZGTE VVT-i (intake)   
Fra: OEM
120,00 DKK  m/Moms
( 96,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager
Model/varenr.: 17176-46030
Intake gasket 2jzgte
118,75 DKK  m/Moms
( 95,00 DKK  u/Moms )
Lager: Ikke på lager Ikke på lager